Confusing UK Broadband Terminology Found By ‘4th Utility’ Survey

Internet Service Provider 4th Utility published results of a new survey last month, reporting that among the 2000 respondents there was a major lack of understanding of vital broadband terms amongst consumers. 

4th Utility is an ISP who is currently in the midst of deploying a gigabit speed FTTP (Fibre to the Premises) network to large residential buildings and UK homes. Despite the fact that the term ‘full fibre’ is widely used and that the service is ‘being used by most UK households’, surprisingly their recent ‘Great British Broadband Survey’ found that just 1 in 5 residents actually know what that means. 

What Does ‘Full Fibre’ Broadband Mean?

Just in case you’re one of the 1 in 5 who aren’t sure what full fibre broadband refers to, full fibre broadband means that your home is directly connected to the exchange using fibre optic cables. 

Standard fibre cables are connected to your home via a street cabinet (so fibre cables from the exchange to the street cabinet and then different cables from the street cabinet to your home). This service uses older copper cables to connect to your home, which are an older technology and less reliable than fibre cables.  

28% Have Adopted Full Fibre Network, Ofcom Says

Whilst 4th Utility claims that full fibre is ‘already being used by most households,’ Ofcom says differently. 

Full fibre might be available to most UK households, but not all those who are able to adopt the service have done so. According to Ofcom, only 28% of households able to get a full fibre network have adopted the service. 

Coverage is not the same as take up! 

Is Broadband Baffling?

Despite the slight confusion about full fibre coverage and take up, the fact remains that many consumers are bewildered about broadband terms.

Some respondents said they still weren’t sure what full fibre meant, even after they had had it explained to them. 20% of the 2000 people surveyed said they weren’t sure whether they had the service in their home after having it explained to them, 25% said they didn’t have it and the remaining 45% said they did have full fibre in their home. 

Let’s run through some of the other terms that the respondents found confusing, as well as their meanings.

What is Bandwidth?

Only 9% of the respondents knew what bandwidth means. Network bandwidth is a measurement indicating the maximum capacity of a wired or wireless communications link to transmit data over a network connection. 

Bandwidth specifically refers to the capacity at which a network can transmit data. For example, if the bandwidth of a network is 60 Mbps, it implies that the network cannot transmit data faster than 60 Mbps in any given case.

What does FTTP mean?

FTTP stands for fibre to the premises and is a type of fibre optic broadband. FTTP is supplied by fibre optic cables from your local internet exchange — a physical location where network providers transmit internet data — directly to your business’s premises.

What is meant by ‘Superfast’ broadband?

Superfast broadband is a broad category of speeds, running from 30Mbps to 100Mbps. The faster your broadband speed, the faster you can download files, movies and games.

Superfast speeds usually reach homes via a part-fibre broadband connection, which uses fibre-optic cables up until the local street cabinet, and then copper phone lines for the final leg of the journey to your home.

Some form of superfast broadband is available to 97% of the UK from the majority of internet service providers, and in many cases is actually more affordable than slower, old-fashioned ADSL connections, especially if you happen to be out of contract on an ADSL package.

Some full fibre deals will offer superfast speeds too, but they come with the capability to boost your speed much further – all the way up to 1Gbps.

What is ‘Ultrafast’ internet?

Ultrafast broadband is generally considered any broadband connection that supplies 100Mbps or faster.

The telecoms regulator Ofcom defines ultrafast as “broadband which offers download speeds of at least 300 Mbps”. However, some providers that use the ultrafast broadband term don’t offer those speeds.

Several broadband providers use the term ‘ultrafast broadband’ to refer to their top-end broadband packages. However, providers use different technologies to deliver their broadband services to your home, and as a result the speeds they can offer also differ significantly.

It can sound confusing, but the general rule of thumb is, that if a provider is labelling a package as ultrafast broadband, it’s one of the fastest packages they provide. 

The fastest broadband you can get might not necessarily be the fastest broadband available on the market. It might not even be the fastest broadband your next-door neighbour can get. If you’re not sure what types of broadband are available where you live, you can check to see what the fastest broadband in your area is with the Uswitch postcode checker.

What does Internet of Things mean?

Just 8% of the people surveyed knew what Internet of Things (IoT) meant. The term IoT, or Internet of Things, refers to the collective network of connected devices and the technology that facilitates communication between devices and the cloud, as well as between the devices themselves.

Key Findings of 4th Utility ‘Great British Broadband Survey’

Let’s take a look at some of the more interesting findings from 4th Utility’s recent survey. 

What utility nightmare do Brits fear the most? 

  • 30% feared a boiler breakdown as the biggest utility nightmare
  • 23% were worried about a water leak
  • 13% were concerned about a total blackout causing utility problems
  • 12% of those surveyed considered a broadband outage as a utility nightmare

Slow internet causing household arguments

20% of respondents reported having slow internet at least 3 times per month, and 1 in 3 said it happened twice a month. Over half of those surveyed (51%) said that slow Wi-Fi caused heated arguments in their household, happening to 3 in 10 people a few times a month, or more. 

Over 50% of those surveyed said that they have broadband speed issues, with 14% of those saying it was a weekly occurrence. However, the root cause of those speed issues seemed to be challenging to identify, with 7% of respondents saying they thought that not turning their router off at night was the reason for their problems…

What do UK residents pay for broadband?

Of the 2000 people surveyed, nearly half said they pay over £30 per month for their broadband connection. 1 in 10 people said their broadband bill came to £50 or more per month. The average price for broadband per month was £33.52 for UK households. 

Broadband Bewilderment is Nothing New

Here at Geekabit, we might be experts at all things Wi-Fi and wireless connectivity, but even we can sympathise with people getting confused over all the acronyms and terminology when it comes to broadband. It’s no wonder consumers feel a bit baffled. 

It’s not a new problem, and it doesn’t help that those in charge (regulators and government) seem to like to change the definitions of things fairly often. 

The threshold for ‘superfast’ broadband and download speeds has changed from 24 Mbps to 30 Mbps+ (to match with the EU). And with ‘ultrafast’ speeds on the scene, the speed of ‘superfast’ may be questionable anyways.  

Many in the Wi-Fi industry think of ‘ultrafast’ broadband as being 100 Mbps+, whereas Ofcom defines it as 300 Mbps+, so no wonder consumers feel confused at all the jargon. 

Often the best course of action is to look at what services are available to your premises, and then compare the advertised speeds from different providers. At the end of the day, even if you don’t know all the lingo, all you need to ensure is that you have an internet service that works, at the speeds you have been promised. 

New Ofcom Guidelines to be Introduced Later This Year 

Perhaps most annoyingly, some ISP’s use terms like ‘fibre’ broadband and ‘full fibre’ when it’s not strictly the truth. For example, using the term ‘fibre broadband’ to describe connections like FTTC (Fibre to the Cabinet) when it’s actually slower, hybrid-fibre connections. 

Ofcom’s new guidelines will mean that ISP’s will only be able to use terms like ‘fibre’ and ‘full fibre’ broadband when their network actually brings fibre optic cables all the way to your home (ie. FTTP/B). These new guidelines should help make things clearer for consumers, and will come in later in 2024. 

Why Does My Wi-Fi Randomly Stop Working?

And more importantly, how can I fix it? 

There’s little more frustrating than your Wi-Fi going down. Whether you’re working from home and mid Zoom, streaming your favourite show or gaming with friends – If your Wi-Fo goes down it’s an urgent problem to solve as soon as possible. 

Much like a power cut, when there’s no Wi-Fi we really feel it’s absence. And much like flicking the light switch on and off, we head straight for the hardware when we’re trying to figure out what the problem is. 

What to check on your hardware when your Wi-Fi stops working

  • Are the router and any other units plugged in and switched on – Are the lights on? 
  • Is every relevant cable properly connected?
  • Are any external antennas linked to the router fastened correctly?

Checking for disconnected cables that have been unplugged, disconnected or damaged could be a straightforward fix for your Wi-Fi woes.

If it’s an intermittent problem, then look for a ‘strangled’ cable. This is a cable that might be getting squashed underneath furniture or has perhaps been nibbled by a pet. 

If you’ve checked all the cabling and hardware and things look okay – What’s next?

How to check if it’s a Wi-Fi problem when your internet connection goes down

If everything is powered-on hardware wise, then the next thing to check is your Wi-Fi and whether the signal is being broadcasted. Find a device and try to connect to your Wi-Fi. 

  • Is your network being broadcast – Is it in the list of possible networks to connect to?
  • Can you connect to your network on the device?

What to do if your network is not being broadcasted or you cannot connect to the network

If one or neither of these things is happening, then the problem could be with your wireless source. You could try resetting the power on your equipment ie. turn your router off for 30 seconds and then turn back on again. 

You may even need to replace your router. If yours is leased from your Internet Service Provider (ISP) then get in touch with them to see if they can either help reset it remotely or get you a replacement. 

What to do if your network is being broadcasted and it says you’re connected, but you still have no internet connection

If you can see that your network is being broadcasted and you are able to connect to it, then check the signal strength in various locations (ie. where you need a connection).

What should my Wi-Fi signal strength be? 

In an ideal world, your Wi-Fi signal would be above -68 dBm.

For general internet access (not voice or video calls) then you could probably manage at -72 dBm. 

Anything below that level would probably cause problems, and you would likely need to be considering alternatives to solve your signal coverage issues. 

These alternatives could invoice:

  • Additional access points
  • Extender / mesh extender

Be cautious with signal extenders – These should only really be used as a last resort. This is because in order to keep the wireless link between the extender and main router, they use up considerable bandwidth. 

You could instead try a tri-radio router and implement multi-radio extenders or mesh nodes. This could enable you to use one channel for your network and another for end device access.  

How to measure your Wi-Fi signal

To measure your Wi-Fi signal and check if you have enough coverage, there are a couple of ways to do this. 

Measuring Wi-Fi signal on a laptop

If you have a laptop, you can check the stats of your wireless interface, or install a wireless measuring tool, like WinFi Lite. 

Measuring Wi-Fi on a smartphone

If you have an android smartphone, you can install a wireless signal measuring app, like “WiFiman”, or if you have an Apple device, you can install the “Airport” app and use it to scan the signal strength.

Measuring Wi-Fi signal strength

Using the tools above, you will be able to not only measure your own network but also neighbouring networks and how they are affecting yours.  

It’s nigh on impossible to be unaffected by an external 2.4 GHz network. If you can, try to use the 5 GHz spectrum. This network has more channels for you to use and thus a lot fewer interfering networks, even in residential areas. 

Bear in mind that in locations like apartment complexes, even the 5 GHz spectrum can become congested but is still generally the better option. 

An even better option would be the 6 GHz channel, but it’s likely that your devices will no longer support it in the not so distant future. 

If your Wi-Fi coverage seems fine, it could be your network usage causing internet problems

If your hardware looks okay, your network is broadcasting and you can connect, and your coverage looks good, then it’s time to consider your network usage. 

At the time you were experiencing internet problems, consider

  • How many people were connected to your network
  • What they were using the internet for 

It’s quite likely that your router wasn’t built for the demands of multiple video conferencing calls on your work laptop, a show streaming on Netflix, plus online games being played on the iPad. 

That’s a considerable amount of traffic for it to process and could cause things to get a bit unpredictable connection wise. 

If this is a common usage demand, then it may be time to speak to you ISP and see if you can upgrade your router and package. Think about whether it would be worth upgrading to hardware that supports Wi-Fi 6.

You could also consider installing additional access points to help ease the burden on the main router. 

Another potential solution is to skip the Wi-Fi element altogether, and plug your device into the router via an Ethernet cable. Hint: THis is also a great way of testing whether the issue lies with the internet connection itself or how the Wi-Fi signal is being transmitted. 

‘I’ve tried everything and my internet still won’t work!’

Okay, we get it, by this point you would be really frustrated. You’ve checked the hardware, you’re connected and coverage is fine, network usage is low – Yet there are still network problems! What else could be causing your internet connection to be unreliable and unpredictable? 

It could be wireless interference issues. 

Many routers we use in our homes support only 2.4 GHz communications. The problem with using that range is that many other manufacturers use those channels for other pieces of equipment because it’s cheap and long ranging. 

Things that could be interfering with your Wi-Fi signal are:

  • Baby monitors
  • Wireless video security cameras / doorbells
  • Microwaves
  • Motion detectors as part of an alarm system

These are just a few common examples, there are many others that use the 2.4 GHz band and could cause interference problems. To get a full picture of what’s going on, you could need a spectrum analyser.

There are of course other possible forms of interference as well. Where is your wireless router located? You should avoid:

  • Shutting it in a cupboard
  • Placing behind a large bit of furniture
  • Too much metal close by (cabinets, fridges, etc)
  • Mirrored windows 
  • Painting walls with magnetic or metallic paint

We have a whole article on how to avoid interference – You can check it out here. 

Could it be your naughty neighbour? 

As we must consider all possible options – Could it be that your neighbour is doing naughty things to your internet connection? 

Unfortunately, it is a possibility that your neighbour is deauthenticating your network. This means they are using external wireless equipment to pose as your network and then start sending deauthentication packets to your users. In other words, telling devices that are connected to your network to get off every time they leave and try to reconnect.

It’s very hard to catch this happening unless you have the proper knowledge and tools. Fortunately, some access points can detect these attacks and report them like cloud-based solution access points.

Is there anything else that could be causing my Wi-Fi problems?

So far we’ve checked:

  • For hardware problems
  • Whether your network is being broadcasted
  • Whether your Wi-Fi is transmitting a signal
  • How strong your Wi-Fi signal is / coverage
  • Network usage
  • Wireless interference
  • Naughty neighbours

That’s a pretty comprehensive list. If none of these are causing your internet problems, then it could be the integrity of your internet connection. 

How do you check the integrity of your internet connection?

Use one of your devices to check to see if you are getting an IP address. This is something you could try first, but if you checked the connection using an Ethernet cable (for example, a desktop computer that’s connected directly to the main internet connection (router) via cable) and everything was fine then your main internet connection is unlikely to be the issue. 

Things to check:

  • Do you have an IP address?
  • Can you ping your gateway?
  • Do you have DNS?

If you don’t have an IP address:

Have a check of your network stats and verify if you have a proper IP address. If you don’t, then try to register again to your home network. To do this you can simply just restart your router. 

If that doesn’t work, then try resetting your DHCP server. Most of the time, it’s to do with the home router. If you’re not using a router, then whatever you are using – restart that. 

If restarting it doesn’t work then check your DHCP configuration or give your ISP a call. 

If you do have an IP address:

If you can see that you do have a proper IP address, try to ping a public site like google.com. If that fails, try to ping a well-known public IP address like 8.8.8.8. 

If that works, then there may be an issue with the DNS that you have configured so you could try using public DNS servers, like 8.8.4.4 or 8.8.8.8. 

If a ping to a public IP address fails, then that indicates that the problem is either in the path between your home router and the ISP or something in the ISP itself.

It’s not you, it’s them

Sometimes it’s not anything to do with any of the potential problems we’ve discussed above. Sometimes it’s a problem with your Internet Service Provider and there is simply an outage on the service that you are trying to access.  

This can be for a few different reasons. 

Perhaps you have been disconnected because your street or building has a problem in the distribution panel. A cable could have been cut or damaged somewhere in the network during construction or roadworks or something similar. 


It could also be a problem with the ISP infrastructure. If they are experiencing issues in their client management system, then this would stop you accessing the service. 

If you’ve tried all of the above and nothing has helped, then it’s probably time to give your ISP a call and see if the problem is their end of things. 

Good luck!