Tag: bandwidth

  1. Homepage
  2. bandwidth
4G 4G LTE 4G Mobile Broadband 4G survey 4G Wi-Fi Antenna Antennas
4G LTE Antenna – What Do I Need to Consider? 

If you are using a 4G LTE broadband connection, or plan to, then you’ll need to be considering your external antenna. 

 

4G broadband is a fantastic option if you struggle with a standard broadband connection, especially if you live or work in a more rural area. Over the past few years we’ve seen a big uptake in 4G and mobile broadband options – For homeowners as well as businesses. 

 

What you don’t want is to switch to mobile broadband, and then end up with download speeds that are lower that what you were expecting. Whilst this may simply be down to poor reception, there are some other factors that can come into play. 

 

So, with you as the user, what considerations do you need to make to ensure your 4G mobile broadband connection will be the strongest it can be?

 

Did you know that LTE is MiMo technology?

LTE, like 11n Wi-Fi, is a multi-stream radio, multiple in/multiple out (MiMo) service. So similarly to 11n Wi-Fi, LTE uses multiple radio data streams to and from the end client – Which means the more streams of data the client can take, the faster the broadband. 

Just like in 11n Wi-Fi, the number of streams is T (the number of transmit radio streams) multiplied by R (the number of receive streams the connection can support) so TxR. This means that if something supports 2×2 streams, it can support twice the upload and download speed of a device with 1×1. In 4G LTE, you get anything from 1×1 to 8×8 stream capability (including all the possible mixes in between them). 

The number of transmit and receive streams dictates how many antennas the client needs. So for a 1×1 service, you would only need a single antenna. For a 2×2 service you would need 2 antenna. You get the idea. 

A connection can only support the number of streams the service provider is capable of via their masts. It is also dependent on the client device and its radio capabilities. 

The majority of devices – Like phones and routers – have dual stream capabilities. 

 

Choices of Antenna

If you’ve already been looking for a 4G LTE antenna then you’ll likely already have realised that there can be a difference in price. One of the main differences between antennas will be, as we said above, the number of connections they have. 

 

As you’ll have probably guessed, the more connections they have, the picier the get. So a 2×2 (or 2×1 or 2×2) device will cost more than a 1×1 device. You’ll typically see a choice between single (1×1) and dual connection (2×2) antennas. 

 

In most scenarios, you will be wanting a dual connection (2×2) antenna so that it supports the functionality of your router and other devices with dual stream, MiMo functionality.

 

But how do you know if the antenna will be any good? 

 

That comes down to polarisation. There needs to be a physical difference between the radio streams so that the receiver can differentiate between them. This can be as simple as mounting the antennas, leaving a physical gap between them of a few inches. 

 

It’s also a good idea to have each antenna at a different angle – Ideally at 90 degrees to each other. This is because although the radio waves might leave the mast in a lovely vertically polarised fashion, after a few reflections they will likely not be like that any more. Setting up the antenna so that they can also receive radio waves that are no longer vertically polarised will mean you will better receive the signal – A cross shape would achieve this. 

 

Do I need a Directional or Omni-Directional Antenna Set Up? 

Whilst it might be tempting to just opt for the highest gain directional antenna, this isn’t actually always the best choice – For 4G LTE or Wi-Fi. 

 

If you imagine a radio wave travelling from the mast to your receiver, with nothing in the way, it would have a straightforward route and an uninterrupted signal. In real life, this is unfortunately not the case. The signal cannot go through anything solid, so whenever something gets in its way, it reflects and scatters from those objects until it reaches the antenna. This means that the radio signal could come to your receiver from all different directions. 

 

Directional antenna, although high gain, have limited coverage in terms of their angle. So with radio waves potentially coming in in all directions, the directional antenna is going to cause you problems. 

 

The best situation for a directional antenna is when there is a clear line of sight between the mast and the mount of the antenna – Which is not a very common thing. 

 

The omni-directional antenna might well be lower gain, but it should pick up the signal regardless of what directional the radio waves are coming from. 

 

The best way to improve the signal you receive is to mount the antenna outside and as high up as possible.

 

Directional Antenna Pros

  • Can occasionally give a better, stronger and cleaner signal when carefully aligned with line of sight 
  • With a clear line of sight (and no ambiguity) then a directional antenna would be preferred choice

Directional Antenna Cons

  • Careful alignment with line of sight can be very tricky
  • Without line of sight, you have to rely on how it reflects and scatters
  • Changes in environment can result in how the signal is reflected (e.g. something as simple as a dry wall reflects better than a wet wall)
  • It is harder for the system to switch to a different mast (this could be dictated by the provider)

 

Omni-Directional Antenna Pros

  • Easy and quick installation (no tricky, careful alignment needed)
  • It is easy for the system to change transmitter masts
  • Antenna can be mounted outdoors, making a significant improvement in signal despite the lower fain

 

Omni-Directional Antenna Cons

  • In comparison to the directional antenna, the omni has lower gain
  • Can be more susceptible to radio frequency interference coming from different directions

 

Frequency Bands

There are a number of frequency bands that are used for 4G LTE in the UK. There’s the 800MHz band, the 1400MHz / 1.4GHz band, the 1800MHz / 1.8GHz band, the 2100MHz / 2.6GHz band, the 2300MHz / 2.3GHz band, and the 2600MHz / 2.6GHz band.

 

Although not set in stone, you generally find that the lower frequency bands are used more in rural areas due to them having longer transmission range than the higher frequencies and having to cover a larger geographical area. The higher band would likely be used more in built up towns and cities. 

 

What does this mean for antenna? Well, it means that you, as the end user, need to ensure that your antenna will support the service and frequency band of your provider. If you are sensible and savvy, you will choose an antenna that can cover the different frequency bands in case your service/provider changes. 

 

Stream Bandwidth

The available spectrum is divided and allocated between providers into sub-bands. The connection you get as the end client will depend (and vary) on how many clients the local signal mast can support as well as the bandwidth. 

 

If you live or work in a high user area, the density will mean that you may struggle with throughput speed or even getting a connection in the first place! 

 

What high user density situations could impact your 4G connection? Well, if you live near a football stadium or a busy motorway, you may find that on match day or during a bad traffic jam, your internet connection comes to a standstill as well! 

 

Which Antenna Do I Need for my 4G LTE Connection? 

 

How do you choose? Let’s take a look again at the main considerations you need to think about to ensure the best possible connection. 

 

Single or Dual Antenna

 

Does your router only have a single antenna connector? If so, then you should probably choose an external antenna with a single connector. 

 

If your router has a dual stream connection then you need to choose an antenna with 2 connectors. You could also choose two single connection antennas. 

 

Remember – If the local signal mast sends out a 1×1 service, then that’s all you’re going to get, even if you have a router and antenna set up that supports 2×2. Having the 2×2 compatible service won’t see you any difference if it’s a 1×1 signal service.  

 

Directional or Omni-Directional Antenna? 

We’re not trying to tell you what to do… But our Wi-Fi expert’s advice would be, in most scenarios, to go for an omni-directional antenna. As we mentioned above, it’s tempted to just go straight for the antenna with the biggest gain, usually the directional, when you could face very tricky alignment issues. Very few properties, business or home, have a clear line of sight between their local mast and their antenna. Unless you have this clear line of sight, then an omni is the best option.  

Correct frequency

Remember to ensure that your choice of antenna will work with the frequency range coming from your service provider and local mast. It’s only going to work if your frequency band matches what your antenna supports! 

 

To avoid potential issues when services or providers change, you should aim to choose an antenna that covers all the 4G LTE bands here in the UK. That means that your antenna should always work, even if you change provider or your local service changes. You might have to pay a little more, but it could save you problems in the future. 

 

Location

You should always mount the antenna wherever it has the best line of sight to the local mast. Sometimes you might not be able to see the signal mast, especially if you live or work in a very built up area. Even if you cannot see the mast, bear in mind the direction it’s in – Does your antenna need to be at the front or the back of your building? Even without a clear line of sight, this will vastly improve the signal you get. 

 

Generally speaking, the higher up you can mount the antenna the better! 

 

Also make sure that you’re not locating it close to a thick wall or anything metal. Even an omni-directional antenna would struggle to get a good signal in these situations! You want to make it as easy as possible for the signal to reach the receiver on your antenna. 

 

I’ve followed the advice but still don’t have good download speeds? 

You could have the perfect signal – And still not get good download speeds. This could be down to a few different reasons:

  • The service capabilities of your provider (the frequency they are allocated)
  • The service provided from the local mast
  • The capabilities of your router
  • If you live or work in a high user density area with lots of people trying to connect at the same time

 

Whether or not this matters depends on what you are using your connection for. If you are a business and are relying on your 4G LTE connection for your business operations, then this is going to be an issue. 

 

Trust the Experts

 

Here at Geekabit, our Wi-Fi experts can tell you just how reliable a 4G (or 5G) mobile broadband connection would be with one of our surveys. 

 

If you’re struggling with wired broadband, and not getting the reliable internet connection you need in your rural business or home, then 4G / 5G could be a fantastic option for you.

 

It can feel like a big jump to give up on your wired broadband connection and opt for 4G – Which is where our Cell Coverage 4G survey comes in.

 

We can tell you exactly whether 4G broadband would work for you, and which network would be most reliable.

 

by admin
20 Views0
5G Hampshire Wi-Fi Wi-Fi 6 Wi-Fi 6E Wi-Fi Advice
What is 6GHz Wi-Fi?

Did you know that following the historic decision by USA’s FCC in April 2020 to release 1200 MHz of bandwidth in 6 GHz space for unlicensed use, UK regulators cleared unlicensed wireless usage in the 6 GHz spectrum to give 6GHz WiFi a huge boost back in July 2020. 

 

This regulatory go-ahead enables your router to broadcast over the 2.4GHz and 5GHz bands. What does this mean in real life terms? Simply, it means there are now a lot more open airwaves that routers can use to broadcast Wi-Fi signals. This in turn means faster, more reliable connections from the next generation of devices.

 

This is the biggest spectrum addition in over 30 years – In fact, since the FCC cleared the way for Wi-Fi back in 1989. Pretty huge right? It means the space available for routers and other devices have quadruple the amount in this new spectrum. This means a lot more bandwidth for the user and less interference for their devices. 

 

For the past 20 years we’ve had the Wi-Fi Alliance that oversees the implementation of Wi-Fi. This change in the spectrum is the most ‘monumental decision’ during their existence. You’ll be seeing this implementation as Wi-Fi 6E, with more and more enabled devices becoming available. 

 

Will Wi-Fi 6E fix my bad Wi-Fi? 

 

There’s a good chance that spectrum congestion has interfered with your ability to connect to your Wi-Fi network in the past. When there are a lot of devices all trying to connect over the same band of frequencies, some devices will drop out. Have a look at your local area for Wi-Fi networks – If there is a long list, that could be why you’re struggling with a slow connection and less than favourable reliability. This is because there are too many competing signals, which stops your device getting through. It’s hoped that gains in 6GHz performance will last, even when they are more widely used than they are now. 

 

Not only does Wi-Fi 6E offer new airwaves for routers to use, they are also more spacious airwaves that have less overlapping signals which can cause problems on some other Wi-Fi channels. 

 

The new spectrum doesn’t use any of the previous spectrum, yet offers space for up to 7 maximum-capacity Wi-Fi streams which can all be broadcast simultaneously without causing interference with each other. 

 

Here’s the geeky bit… The UK telecoms regulator, Ofcom, made it possible for home Wi-Fi networks to harness 500MHz of radio spectrum frequency in the new 6GHz band, which will significantly boost the speed of licence-exempt indoor home wireless networks via Wi-Fi 6/6E. 

 

What is 6GHz? 

 

Basically, Wi-Fi works by broadcasting over airwaves that are open for anyone to use. Previously, this was over two bands: 2.4GHz and 5GHz. This third band, 6GHz, is quadrupling the available space for traditional Wi-Fi. 

 

What do the numbers mean? 2.4GHz can travel further, but 6GHz travels faster. The main thing however is that the number of airwaves available on the6GHz band is quadruple what has been available before. Exciting stuff! 

 

On a personal ‘how will this affect me’ level, it means that if you live in a block of flats, and you are the first person to get a 6GHz router, then you won’t be competing with anyone for a connection. The great thing is that even as 6GHz routers become more popular, it’s likely that signals will stay faster and stronger than previously as it’s a more spacious spectrum.  

 

Will Wi-Fi 6E be faster?

 

It’s not quite as straight forward as that, but Wi-Fi 6E will sort of be faster. Theoretically, 6GHz Wi-Fi has the same top speed as 5GHz Wi-Fi. The maximum Wi-Fi 6 standard speed is 9.6 Gbps. Now, you’re not going to actuall get that speed in real life, however having access to the new airwaves could well increase your speed. 

 

The available spectrum at 5GHz means that Wi-Fi signals aren’t as large as they could be. Whereas, it’s thought that routers at 6GHz will broadcast at the current maximum allowable channel size. That in itself, means a faster connection. 

 

These new networks could see smartphone Wi-Fi connections hit 1–2 Gbps. You might be wondering how this compares to 5G – Indeed, these are the speeds expected from millimetre-wave 5G. However, that has very limited availability. 

 

Remember that your internet speeds will also always depend on / be limited by your provider. But it could still be a huge jump for connectivity.  

 

Can I buy Wi-Fi 6 devices?

 

Here in the UK we started to see Wi-Fi 6 devices creep onto the market in the last year or so, once the Wi-Fi Alliance started offering certification for Wi-Fi 6E. Deployment has been slow and steady, with more Wi-Fi 6 enables devices appearing bit by bit. We’re on course for the next generation of Wi-Fi networks.

 

Wi-Fi 6E enabled devices are most seen in smartphones and then tablets, with TV’s likely to follow suit. We use our phones for almost everything, so it’s no surprise that it’s this device that will be top of the list for Wi-Fi 6E. 

 

How do I know if a device supports Wi-Fi 6E?

 

The most widely used Wi-Fi standard on current devices is probably still Wi-Fi 6, the standard previous to Wi-Fi 6E, which you could still see on the box of a new device. This isn’t such a bad thing – It means that the device supports that Wi-Fi standard and offers efficient Wi-Fi performance. 

 

What you should probably start looking out for when buying a new device is Wi-Fi 6E – It’s this one that is extended into the 6GHz band. All devices, like smartphones, tablets, laptops and routers should have backward compatibility – Meaning they will work with any previous Wi-Fi standard to the one that’s stated on the box. This means that you can enjoy available connections even when Wi-Fi 6E isn’t available. 

 

Be aware that even if you buy a Wi-Fi 6E compatible device, you will enjoy the benefits of that when you use it with a Wi-Fi 6E router. 

 

6GHz will become an integral part of Wi-Fi 6 and future generations of Wi-Fi. This means that at some point, you will have to replace your devices with ones that are Wi-Fi 6E compatible to be able to enjoy all the benefits the extra spectrum has to offer. 

 

Due to the Wi-Fi Alliance certification programme, only efficient Wi-Fi 6 devices will be certificated. 

 

It’s worth bearing in mind that the 6GHz spectrum does have some existing licensed users. This means that particularly in outdoor spaces,  Wi-Fi will have to work around them. Outside, routers will need to use something called an “automated frequency control” system. This ensure that they don’t interfere with these existing 6GHz users. Because that means less space to broadcast, there could be degradation of overall performance in some areas.

 

Does Wi-Fi 6E have anything to do with 5G? 

 

We touched on this earlier, but no, they don’t have anything to do with each other really. It just happens that both of these networks are being spoken about a lot, simultaneously. 5G is everywhere, is it not!

 

We keep saying about Wi-Fi 6E being a new spectrum, but really it’s not new, it’s always been there, it’s just been unlicensed. Now, people can use the 6GHz spectrum without a license in their homes. 

 

This also means that other technologies could try to make use of the 6GHz band, which could in turn take up some of the space that Wi-Fi wants to use. 5G is one of the technologies that could be a rival for the space on the 6GHz band. 

 

There is a possibility that 5G could overlap on the new Wi-Fi 6E spectrum through mobile network carriers. This could in turn lead to interference issues, but it’s a bit early to say. If you’re wondering whether 5G will become dominant and replace Wi-Fi altogether, then we think probably not. There doesn’t need to be a winner or a loser when it comes to Wi-Fi 6E vs 5G – They dont necessarily have to be in competition with one another. The spacious nature of this spectrum means there should be enough room for both. 

 

6GHz Wi-Fi is certainly being revered by the tech industry, so we’re pretty hopeful that Wi-Fi will be the main beneficiary of the newly opened 6GHz spectrum. 

 

by admin
21 Views0
Broadband Business Wi-Fi FTTP Leased Line Wi-Fi Wi-Fi Advice Wi-Fi Design Wi-Fi Installation Wireless Network
Which is best for my business – FTTP or a Leased Line?

 

Let’s face it – These days, business flow depends on connectivity. 

 

With remote working now more prevalent than ever before, there is a significant business need for straightforward online collaboration. Not to mention business critical operations and organisational efficiency. 

 

For a successful business, you need a reliable, strong connection that doesn’t buffer or drop out during vital video calls and digital team meetings. 

 

What’s the point in having top of the range tech and dedicated employees if you don’t have the broadband speed to keep up with their communications or computers?

 

There is nothing less motivating than slow internet – Lagging video, audio that’s out of sync, calls that drop out, pages that load slowly. It makes us feel frustrated just thinking about it! 

 

And whilst it might not sound like much – That 30 seconds of delay here and there throughout the day could actually add up to a lot of lost productivity across an organisation in just one week. 

 

So what’s the solution? For any small business, it’s really down to two options – FTTP (Fibre to the Premises) or a leased line. But which one is best for your business?

 

What is FTTP and how does it work?

 

As we said above, FTTP is Fibre to the Premises. It means an internet connection that is designed for small businesses and consumer use.  

 

FTTP works by sending data over a fibre optic cable from the exchange to the user’s premises. FTTP relies on already existing broadband infrastructure, which means that users share the bandwidth. This could lead to slower connection speeds and unreliability during peak times. 

 

An FTTP service is asymmetrical, meaning that the upload and download speeds are not the same. 

 

What is a leased line and how does it work?

 

A leased line, or fibre leased line, is a dedicated fibre optic service. It has a fixed bandwidth and is provided directly to the premises. Unlike FTTP, a leased line connects directly to the public internet. This means there is no shared infrastructure – thus the data’s journey is very different. 

 

Due to leased lines being dedicated, it won’t be affected at peak times because the bandwidth is reserved exclusively for that user. A leased line also uploads data at the same time as it downloads – Useful for sending large files or if you use VoIP telephones throughout the business. 

 

How do FTTP and Leased Line compare? 

 

Let’s take a look at how FTTP and Leased Line compare to each other in terms of use and functionality. Depending on how these fit with your business, you should hopefully be able to identify which would work better for you and your business operations. 

 

Speed and Bandwidth for FTTP vs Leased Line

 

Using an FTTp service, your highest download speed will be in the range of 300mbps and 1Gbps. Remember, in this scenario you share the infrastructure with other users, which means that during busy periods your bandwidth is likely to be compromised. Generally speaking you are looking at about 32 customers on an FTTP service. 

 

On a Leased Line, all of the bandwidth is there for you to use. The connection speeds on a Leased Line could be up to 10Gbps, with the same upload and download speeds. This is particularly useful for high-demand users, who could struggle on an asymmetrical FTTP. 

 

Traffic on a FTTP vs Leased Line

FTTP services can have a monthly data transfer quote which means it would be important for you to stay on top of your data usage. 

 

A leased line has availability 24/7 all year round, which means you have unlimited data transfers. 

 

Price of FTTP vs Leased Line

There is a significant difference in price when it comes to FTTP and Leased Line. 

 

The cheaper option is FTTP. This is because it’s a shared service, and more specifically aimed at residential properties and small businesses. You would likely be looking between £30 and £60 per month, which of course depends on the provider and the speed of the broadband you choose. For a new FTTP installation, it would take about 10-15 days. 

 

For Leased Lines, you would be looking at a cost of about £150 per month for lower bandwidths. Not only is it up to 5 times the cost of some FTTP, you may also incur additional charges (construction charges) which can push the price up more. Installation wise you would be looking at about 60-90 days to get things set up. 

 

Service Level Agreements for FTTP vs Leased Lines 

 

Whichever service you go for, you will have an SLA. The SLA for a Leased Line will be more thorough – For example, any fault on the line that needs fixing will be repaired within 5 hours. In comparison, a fault on FTTP could take 2 days to fix. 

 

An SLA will also lay out the speed of a Leased Line, which you can then be compensated for if it is consistently slower. This isn’t something you can do with FTTP. 

 

A Leased Line also comes with 24/7 support, whereas support for a FTTP line will be within business hours. 

 

Reliability of FTTP vs Leased Lines

 

As we mentioned above, when using an FTTP line, you could notice an adverse chane in connection during peak times. Leased Lines will never experience this problem (unless there is a fault) so you are less likely to have the connection drop out. This means that a Leased Line is the more reliable connection of the two. 

 

Availability

 

Leased Lines are available throughout the UK, but of course their accessibility depends on whether you can afford the cost. 

 

Whilst FTTP is a cheaper option, it is only available to approximately 94% of the UK.

 

Contracts

 

Contract options for these lines are as follows:

  • FTTP – 12 months, 18 months or 24 months, 
  • Leased Line – 12 months, 36 months, or 60 months 

 

It’s worth noting that if you choose a 12 month Leased Line contract, you’ll be paying more each month to spread the installation cost. 

 

So Which One is Best – Leased Line or FTTP?

 

If you own a small business, run a charity or are a residential consumer, then FTTP will likely meet your needs. 

 

Generally speaking, if you are one of these types of consumer then you won’t be needing service 24/7 all year round. You are also less likely to be transferring huge amounts of data too. And it’s the cheaper option! 

 

For larger businesses and organisations that rely more on a reliable connection, then a dedicated Leased Line service with a thorough SLA could be the better choice. You will then have peace of mind that your broadband is sturdy, and should something go wrong with it you’re backed up by a speedy resolution. Keeping disruption to your organisation to a minimum! 

 

Get In Touch

 

If you are feeling unsure about what could be the best internet service for your business and would like to discuss your connectivity needs, then get in touch with one of our Wi-Fi Experts today. We operate out of Hampshire, London and Cardiff and can help you to make sure that your connectivity meets your business or residential needs – Both in terms of connection but cost too. 

 

by admin
20 Views0
Business Wi-Fi Wi-Fi Advice Wi-Fi Design Wi-Fi Interference Wi-Fi Site Survey Wireless Network
How to Give Your Wi-Fi Network a Health Check

You might think that once you’ve got your Wi-Fi network all set up and running, then that’s it done. But it’s not! Having a reliable wireless network involves ongoing maintenance and health checks to make sure that it’s performing at its optimum level.

There are plenty of variables in a wireless network that could change. Things like user demand or changes in the radio frequency that could have an impact. Seemingly simple things like rearranging your office furniture, onboarding new employees or using more applications requiring bigger bandwidth can all be negative factors affecting your Wi-Fi network.

Ongoing, regular surveys can help you catch these changes before they start to cause you too many problems.

So what do you need to do to keep your wireless networking functioning effectively?

 

Monitor New Client Devices

Just as when you are in the design and planning stages, it’s vital to know the number of users that are connected at any one time, and what devices they are connecting to the network with. Your network performance depends on this!

This could likely change with company growth or if your business has seasonal staff where connections peak and trough.

It’s also worth bearing in mind how old the devices are. Older laptops, for example, won’t work so well with today’s modern networks. And vice versa!

You can counteract this by semi-regularly updating your devices to align with your network.

Likewise, if your network was originally deployed a while ago, without being monitored or updated it will fail to work with modern devices to their potential.

You need to also monitor the applications being used and ensure that the bandwidth matches the demand. Organisations like schools that now have a plethora of laptops connecting wirelessly to the school network need to have strong, reliable Wi-Fi. Hospitals also have high bandwidth demand with the ‘workstations on wheels’ that are now prevalent.

The more end users you add to your network, the more bandwidth you will need.

In simple terms – Make sure you are monitoring new client devices. Make it your business to keep track of how many devices are connecting to your network and make sure you can meet the Wi-Fi demand consistently. Your business operations depend on it.

App Usage and Progression

As we all know, technology is constantly evolving. Device manufacturers are always striving for the fastest, most powerful offering to stay ahead of their competitors.

This means that apps and software also move fast to keep up. This constant evolution means that you need more and more data with every update. Thus, the requirements of your Wi-Fi network are likely to change and be modified accordingly.

Wireless is often the first choice – If not the only choice! So you need to make sure your business Wi-Fi offering is up to scratch.

 

Physical Changes in the Office Landscape

You might not think too much about rearranging the office, but this could have a significant impact on your coverage area and how your access points function.

Tweaks like going from open plan to individual offices (or the other way around) will change the way your AP’s perform in your office space.

Interior walls (or lack of them) will affect the radio frequency and how it attenuates. You might be thinking, surely removing partition walls to make an open plan office couldn’t cause Wi-Fi problems. Ut actually it could! The RF will be able to travel further without any attenuating interior walls, meaning it could start contending with other channels and cause interference.

Any physical changes in your office environment need to be surveyed to see if and how it will affect how your Wi-Fi network functions. This means you can make the necessary adjustments before problems arise.

 

Identify Common Causes of RF Interference

Following on from physical changes in your office environment, you need to also be aware of other possible causes of RF interference.

Once possible source of interference on your Wi-Fi network could be noise from neighbouring networks. Other AP’s in range of your coverage area could cause RF interference, especially if their power levels are turned up.

Wi-Fi interference is when you have AP’s that are operating on the same or adjacent frequencies. This can cause interference or contention on these channels, or Overlapping Basic Service Set (OBSS). If your network is experiencing this type of interference, you could see your ability to send or receive data significantly reduce or even completely disabled.

You can also get non–Wi-Fi Interference from devices that use other radio networks. Things like microwaves, monitors, blue tooth or surveillance cameras could all cause interference problems.

 

Your Business Depends on your Wi-Fi Network

If you’ve gone to the effort of designing and planning the optimum network for your business, then don’t waste that work by not monitoring and maintaining it.

Even the best networks will need tweaks and changes over time, to make sure it can keep up with the demands of new users and modern devices.

Regular monitoring or ‘Wi-Fi health checks’ can help identify problems while they’re still small – Allowing you to get them sorted out before they start causing your business serious issues. Don’t wait until the IT department are inundated with calls from frustrated, unproductive employees.

If you think your wireless network is in need of a health check, why not give us a call here at Geekabit? Our wireless experts have the knowledge and expertise to diagnose and solve your Wi-Fi problems, improving the reliability and functionality of your business Wi-Fi.

by admin
154 Views0
Business Wi-Fi Wi-Fi Wi-Fi Advice Wi-Fi Design Wi-Fi Installation Wi-Fi Site Survey Wireless Network
Why Is Network Design So Important for Reliable Business Wi-Fi?

Wi-Fi is no longer a ‘like to have’ when it comes to successful business planning. It’s vital for businesses to have strong, reliable Wi-Fi in order to business processes to run smoothly.

No matter what industry your business is in – Wi-Fi is crucial. Gone are the days when everything could be wired and cabled. Whether you run a warehouse, a hospital or operate out of an office; Your business needs to run wirelessly.

Organisations tend to have an armada of laptops, tablets, smartphones and other IoT devices that require effective Wi-Fi.

So if the need for a good Wi-Fi connection is so prevalent, why are we still seeing so many businesses struggle with their Wi-Fi network?

The requirements can be demanding, and to be successful a network needs to meet those demands. Plug-in-and-go routers aren’t going to cut it unfortunately. Your business network needs more!

So how can you ensure that your network can be relied upon by your employees every day, so they can do their job productively and efficiently?

It all comes down to the design.

What do you need to consider when designing a Wi-Fi network?

Designing your wireless network gives you the chance to translate your business needs into a Wi-Fi network that will work for you and meet those needs.

So what do you need to consider?

Capacity

You need to think about how many devices will require a Wi-Fi connection. You need to be asking questions like how many employees you have, are there people in addition to employees that will need to connect, how many devices are each of these people likely to have and what type of device are they.

Getting to know how much traffic you will likely have will help you to determine how much bandwidth you need in order to meet consumption needs.

If you don’t get the capacity planning right, you could end up with very unhappy employees suffering with slow internet speeds and an intermittent connection. Neither are conducive to a productive work environment!

Something else to consider is how the capacity changes as you move around your site. Do some locations have a higher capacity demand than others? This information will help you to design a network where access points are distributed according to requirements.

Capacity isn’t just important during the planning stage either. It’s something you will need to monitor so that you can identify when more devices are trying to connect and adapt the network accordingly.

 

Coverage

We’ve talked about capacity and how many devices are likely to connect. Now it’s time to talk about where those users need that connection.

Identifying your coverage area allows you to optimise the distance between your wireless transmitters. Getting this right means that you’ll have the right signal strength for the Wi-Fi enables devices trying to connect.

Coverage is split into two – Primary coverage and Secondary coverage. Interweaving the primary coverage area of your transmitters with the secondary coverage of necessary overlaps means that your end users will be able to roam throughout your site without their connection dropping out on their device.

The idea is to find the perfect balance in the number of AP’s you deploy. Too many AP’s not only costs you more money on installation but can also cause interference. Not enough AP’s and you won’t be able to meet your coverage needs.

 

What is the Least Capable, Most Important Device?

It’s important to identify what device is most business critical – And whether that device poses a risk to the rest of your network. You might find that a warehouse scanner, or even an employees laptop, is critical to the needs of the business, but is also the oldest and least technologically advanced device on the network.

You need to identify this device (or devices) and make sure that your network will ensure the device(s) stay online. You can do this by checking the manufacturer specifications and make sure these align with your network offering.

 

Are there any Obstacles on site?

It’s a good idea to walk around your site and identify any potential obstacles to your wireless signal. Sometimes having an actual walk-around sheds more light on potential problems than just looking at a simple floor plan. You need to know exactly how the radio frequency will behave in your specific environment.

Consider things like high or exposed ceilings, columns, large items of furniture, lift shafts, stairwells and even signage.

You should also look to see where access points could be easily installed, and any areas where this would not be possible. This also goes for cabling.

Mitigating the Effects of Wall/ Door Material on Signal Attenuation

In order to mitigate the risks of attenuation, you need to understand what materials could pose a problem to your Wi-Fi signal.

When you are designing your Wi-Fi network, it’s imperative that you identify the physical characteristics of your environment and understand how this can impact your wireless signal.

The amount of signal strength absorbed by walls or doors depends on what they are made from. A rough guide to this would be:

  • Bookshelf – 2dB
  • Drywall – 3dB
  • Exterior Glass – 3dB
  • Solid Wood Door – 6dB
  • Marble – 6dB
  • Brick – 10dB

Having this information specific to your site means you can design a wireless network that works really well.

Call the Experts

If this all seems a bit overwhelming, then call in the experts. That’s what we’re here for! We have all the necessary technology to survey your site and then design and plan a wireless network specific to your business needs. Give our Wi-Fi experts a call today to see how Geekabit can help.

 

by admin
169 Views0
Broadband Home Network Home WI-Fi Optimising Home Network Remote Learning Router Wi-Fi Wi-Fi 6 Wi-Fi Advice Wireless Network Working From Home
Wi-Fi Woes at Home: Could it be your Router?

Wi-Fi is one of those things that we don’t tend to take much notice of – Until it breaks.

Just like when a power-cut stops our electric, or cloudy water comes out the tap – When our Wi-Fi goes down, we notice! Slow or faulty internet might be one of the most frustrating things of all time. There’s nothing quite as annoying – Whether you’re in the middle of a Netflix binge or an important Zoom meeting.

The last time you thought about your internet probably coincided with one of those moments. Maybe it was back when the first lockdown came in and you were suddenly thrust into a world of remote working. Or when schools were closed and you abruptly and unexpectedly became a teacher and had to navigate an online classroom with your children.

Never have we had to rely on our home Wi-Fi networks like we have the last 2 years. The world still looks like a bit of a scary place right now – Don’t let your home network be an added source of stress.

We might have electricians to sort out our electrics and plumbers to sort out our plumbing – But who sorts out our Wi-Fi in our homes? Here at Geekabit, our Wi-Fi experts are here to help you. Most people get sent a router from their broaband provider, plug it in and hope for the best (no judgement here!). But what about when that’s not enough to provide you with a reliable home Wi-Fi network?

We’re going to take you through the basics of Wi-Fi so you can make sure your router is providing your home with the network you need.

So let’s start from the beginning.

Wi-Fi Standards – What are they?

What we understand as Wi-Fi was only named that after the ability for us to connect to other computers and the internet has long been around.

It started out as 802.11 (The first Wi-Fi standard). Not quite the description you’d expect for such a transformative piece of technology! And certainly not a word that lends itself to the general population of internet users.

So what came next? Along came 802.11b (there was a 802.11a but we won’t go into that). Catchy huh! This was the first major revision of 802.11 which came in 1999 alongside the name Wi-Fi. These numbered standards come from the Wi-Fi Alliance – A global group of technology companies who ensure that anything labelled as a Wi-Fi product has been adequately tested as such.

This means that if you buy a product with Wi-Fi, such as a laptop, and you have a functioning Wi-Fi network, then the 2 will be able to connect. That’s the rule!

In the 20 years since we’ve had more revisions and improvements, taking us through more standards: 802.11b, 802.11g, 802.11n, 802.11ac and 802.11ax. They don’t exactly roll off your tongue do they?

What they have done however, is:

  • Increase the maximum speed
  • Minimise congestion in built-up areas
  • Improve connections when multiple users on different devices are accessing the same network

Wi-Fi Standards and Compatibility

What these complicated names also mean is that even the most technological savvy people don’t have much knowledge about how their home Wi-Fi network actually works. Again no judgement – It’s not your fault!

Without Googling or hunting down hardware – Do you know which of the standards above your home network supports? How about your laptop, tablet or smartphone?

Without also knowing what standard your router runs on, how could you know whether the standard your devices are running on is compatible?

Backward compatibility has its costs. If you have a new router running on the latest standard of 802.11ax, but your laptop is 20 years old with 802.11b compatibility, the laptop can only go as fast as the old standard. It can’t access the benefits of the newer standard that the router supports. Unfortunately, having this laptop connected to the network can cause the whole Wi-Fi system down to its level. For this reason, the default settings on many networks automatically kick off any older devices to stop problems arising for other users.

For this reason, it’s wise to make sure that the Wi-Fi standard that is supported, is common amongst your router and the devices connected to it.

The re-branding of Wi-Fi Standards

Thankfully assessing compatibility will become a lot easier now that the Wi-Fi Alliance has rebranded the Wi-Fi standards.

You might be surprised to find that you are already acquainted with the latest Wi-Fi standards – Wi-Fi 6 and Wi-Fi 6E.

With the branding of these newest standards, comes the relabelling of the older ones. They become:

  • 11 – Wi-Fi 1
  • 11b – Wi-Fi 2
  • 11g – Wi-Fi 3
  • 11n – Wi-Fi 4
  • 11ac – Wi-Fi 5
  • 11ax – Wi-Fi 6

The ones we need to know about and look out for are Wi-Fi 5 and Wi-Fi 6. Simply put – Your home Wi-Fi network will run better if use routers and devices that support the latest Wi-Fi standard.

We mentioned Wi-Fi 6E. This is the latest Wi-Fi standard which arrived this year. This standard, for the first time since the beginning of Wi-Fi, it uses 6GHz. This band is a new section of the radio spectrum which hasn’t been used by Wi-Fi before. This new standard will minimise interference with other networks and help achieve speeds we haven’t seen before.

Where do routers fit into all of this?

As you have seen, there has been a steady stream of Wi-Fi standards since the internet first emerged.

As with most things technological, improvements are constantly being made. We live in a world where there is always the newest device – Faster, more compact, better this, better that. Always competing with what came before it.

You probably replace your phone quite regularly, especially if you are on a contract or plan. Getting an upgrade is the norm! You may also do the same with laptops and tablets, TV’s and other smart devices around the home.

But do you do the same with your router?

Have you ever stopped to think that the router you’ve had since you moved in is stopping all your new devices from working to their optimum ability?

Your smartphone might support Wi-Fi 6, but that’s no good if your router is ten years old! Could your router be the cause of your home Wi-Fi problems? Slow internet speeds, bottlenecks, buffering?

What’s the point in spending thousands of pounds on the latest phone, tablet, laptop, smart TV etc if you haven’t invested in a router – And instead connect all your top-of-the-range devices to a box you got free from your provider when you moved in nearly a decade ago.

It seems pretty obvious now we’ve pointed it out, but so many of us do this very thing. We’re not trying to shame you – the majority of people don’t consider that their Wi-Fi woes could be a result of an older router.

‘I think my router could be causing my Wi-Fi problems – What do I do next?’

Assuming that the connection coming into your home is not ‘dodgy’ then a new router could be the answer to your Wi-Fi problems.

The majority of households have a pretty straightforward set of needs when it comes to Wi-Fi coverage. A simple change, such as a pair of Wi-Fi 6 ‘mesh routers’, could be just what you need to to provide a bit of extra bandwidth and even cover those annoying ‘black spots’. Esepcailly if one of those happens to be out in the garden where you desperately tried to catch a bit of sun whilst working from home during the summer!

For the cost of skipping the latest smartphone upgrade, you could fix the Wi-Fi problems for your entire household.

No more buffering mid Netflix binge. No more dropping out of video calls and online meetings. No more being ‘that colleague or friend’ that causes the tech problems.

This one small switch could be far more beneficial that upgrading your devices or doubling your monthly BT bill.

What if replacing your router could give all your Wi-Fi devices a new lease of life in your home?

 

by admin
250 Views0
4G 4G LTE 5G Wireless Network
What’s the difference between LTE and 5G?

There has been much hype surrounding 5G, relentlessly for years. Now as part of a global rollout we see 5G available in most major cities as well as some towns and more rural areas. Soon enough, we’ll be using 5G just as we use 4G as the standard.

But 5G is still new to the wireless scene. And for some, the question is – Do we really need 5G when we’ve got LTE?

Many of us are still depending on long-term evolution technology. Indeed, there are only a few areas in the UK that don’t have any LTE presence.

What is LTE?

LTE was first launched back in 2009, and whilst it took a number of years to become part of our national connectivity fabric, it is still now a standard for wireless communications.

The reason for its staying power is down to its reliability and stability – Leading many wireless users to wonder if they even need to move over to 5G.

What is the difference between 4G LTE and 5G?

It was necessary to identify LTE as an element of the 4G standard as many telecoms companies weren’t actually able to provide 4G speeds due to infrastructure. The regulator ITU-R (International Telegraph Union Radiocommunication) established LTE as a standard to show the progress being made towards true 4G.

The download/upload speeds of a particular standard can be different in theory and in practise. Whilst in theory, 4G LTE can achieve data transfer speeds of up to 150Mbps for downloading content and 50Mbps for upload speeds, in practise is is more likely to be 20Mbps and 10Mbps respectively.

These figures will vary depending on:

  • Location
  • Network deployment
  • Traffic

How does 5G compare to 4G LTE in terms of download speeds?

5G connectivity offers theoretical download speeds of up to 10Gbps. A pretty staggering difference! Of course in practise, it may not reach this, but even real-world examples seem to still be dwarfing the speeds of 4G LTE.

Why does 5G reach higher speeds?

5G uses a different spectrum to 4G – Called mmWave which are high-frequency bands. The higher speeds are mostly reached because these high frequency bands support more bandwidth than the ones that LTE uses. This means that more data can be transferred at once.

5G can also use frequencies above low-band but lower than 6GHz. Despite these not supporting the highest possible speeds, they will still outclass 4G LTE. It’s worth noting that 5G coverage could be further expanded by using connectivity below 6GHz, especially as walls and surfaces can block mmWave frequencies.

Basically, 5G uses a different spectrum to 4G LTE and thus:

  • Delivers stronger, faster connections
  • Has a higher capacity for traffic
  • Has low latency (1ms)

Sounds too good to be true doesn’t it! It’s worth remembering that the rollout of 5G is still in its infancy, and therefore coverage is still limited. Before the big networks like EE, Three and Vodafone can deliver the top scope of what 5G has to offer, more work needs to be done.

So should we be choosing LTE or 5G?

As with most techy things, there are lots of factors, such as:

  • Your budget
  • Where you’re based
  • What your connectivity needs are – Personal or business

The more countries adopt and expand their 5G infrastructure, the more 5G-friendly hardware we will start to see. The best way to know whether to choose LTE or 5G is seeing what is on the market and whether it meets your needs.

You may find that some of the 5G devices available don’t have a 4G alternative. You may also find that they are rather on the pricey side! So definitely shop around.

Of course, the more 5G devices we see on the market, the more we will see the prices start to come down. So the time for adopting 5G over LTE may not be quite yet. Patience could also serve you more of the promises 5G has to offer – The more the 5G coverage continues to expand, the higher the speeds and the more consistent the connection to mmWave networks.

Since 2019, we’ve seen prices start to come down as competition in the market starts to heat up, but 5G is still costly. If you have a big budget then you could just go for it now, but we feel like the overall coverage, packages and prices will continue to rapidly improve. We’re inclined to hold out a bit longer and stick to LTE for the time being.

What about 5G for business?

If your business relies on heavily on connected sensors and other similar IoT networks then 5G may be the network you’ve been waiting for. The bandwidth and low latency that 5G could bring to your business cannot be easily ignored.

Think driverless cars navigation and smart sensors – 5G could well be the communications technology that will enable some great and creative deployments.

What are the health concerns associated with 5G?

With 5G comes questions about whether it could harm our health. Do you remember when mobile phones were beginning to emerge into mainstream use and there was much anxiety about what the radio waves were doing to our health? Mobile telephone has never been without concerns, but 5G seems to have evoked more than its fair share of health worries.

The installation of 5G masts have been banned in multiple UK locations. And it’s not just parts of the UK that are opposed to 5G – Back in 2017 180 scientists from 36 different countries made a public appea to the EU to pause their plans of 5G expansion whilst investigations were carried out looking at the long-term effects on human health.

Whilst both 4G and 5G use radio waves, 5G uses higher frequency waves. It’s these high frequency waves that provide better network capacity and speed.

Studies that have looked into any potential health risks from 5G haven’t seemed to identify any specific danger from 5G.

What is the future for LTE and 5G?

With the rise of 5G comes potentially society-changing connectivity – Like self-driving cars.

But technological advances can be slow if not steady. Whilst there is definitely potential for 5G to take over, it could take considerable time for 5G-enabled devices to really take hold of the market. Even from the likes of Apple!

There is still space for 4G LTE in our networks, and whilst it may be 5G’s predecessor, it’s not going anywhere just yet.

Research from Ericsson suggests that the dominant cellular network technology seen in most regions globally is still 4G LTE. 78% of mobile subscriptions in Western Europe in fact! Just because the 5G rollout is well underway, doesn’t mean that everyone will immediately jump ship and drop 4G LTE. It’s expected that 4G LTE will still be the dominant network even 5 years from now.

By 2026 Western Europe is predicted to be using 5G in 69% of all mobile subscriptions. However, Ericssons findings suggest that even as 5G usage surges, 4G LTE won’t automatically decline. It’s even predicted that 4G LTE availability will grow, with global coverage of 95% by 2026, with 5G only seeing 60% in those 5 years.

There is no denying that 5G is the future for telecoms. But by the time we are all accustomed to using it, 6G might well be on the way! Despite 5G becoming more prevalent as time passes, we still think there’s no need to be abandoning 4G just yet.

by admin
267 Views0
Business Wi-Fi Wi-Fi Wi-Fi Advice Wi-Fi Design Wi-Fi Installation Wi-Fi Interference Wi-Fi Site Survey
The Fundamentals of a Wireless LAN

We were going to call this blog ‘WLANs for Dummies’ but that seemed a bit harsh so we settled on the fundamentals of a wireless LAN instead.

A wireless LAN, or WLAN, might seem complicated on the surface but actually it really just follows simple laws of physics. If you can understand these and follow them, then there shouldn’t be any reason why you can’t achieve high performance and scalability for your WLAN.

If you can understand the basics of wireless physics, then you can start to plan your WLAN for a successful deployment. It will also help you to troubleshoot an existing WLAN exhibiting issues.

How Does Data Travel Through a WLAN?

First things first – Let’s look at wave properties.

Data transmits, or travels, from one point to another – e.g. between wireless access points – via electromagnetic waves. This energy travels at the speed of light and operate at different frequencies.

The frequencies of these electromagnetic waves are defined by how many periodic cycles are completed by second.

For example:

How is Frequency Measured?

As we said above, frequency is how many wave cycles are completed per second. This is measured in Hertz. A 2Hz waveform is 2 completed wave cycles in a period of 1 second.

How Does Frequency Affect a WLAN?

A phenomenon called Free Space Path Loss is something that causes signal loss when a waveform travels from one point to another. This is what affects how well data travels across a wireless network.

Different wavelengths (frequencies) experience difference signal loss. The lower the frequency, the longer the wavelength, and the longer the wavelength, the further it can travel before signal gets lost.

For example, 2.4GHz have longer wavelengths than higher frequencies like 5GHz.

How is Wi-Fi Signal Loss Measured?

We measure the energy that is associated with received wireless signals in Decibels (dB). We can also measure loss of signal in this way.

Decibels are logarithmic. On the linear domain, when you add decibels it grows exponentially and when you subtract decibels it reduces exponentially.

The 3dB rule

Every 3dB change, there is a doubling of energy (if increasing) or a halving of energy (if decreasing).

As a ratio, this would look like:

If we had the wireless signal energy at
1:10dB

Then doubling it would be
2:13dB

Remembering this rule can help with both analysing the energy associated with wireless signals as well as predicting it.
Similarly, if you add or subract 10dB, it changes by a factor of 10.

The Relationship Between Frequency and Wireless Signal

Let’s take a look at 2.4Ghz and 5GHz frequencies or waveforms. 5GHz is a higher frequency, so has more wavelengths in a given time period. 5GHz has more wireless signal loss (attenuation) than 2.4GHz, and thus is better for high-density areas. 2.4GHz has less wavelengths in a given time period and is better suited for wider coverage. Bear this in mind when you are planning or troubleshooting a wireless network.

How is Wireless Signal Affected by Different Materials?

In an ideal world, you would have a clear line of sight between your wireless points. In reality, this is rarely the case and you will often find things that get in the way and stop the wireless signal from traversing effectively across your network.

Different materials will affect wireless signals and attenuation in different ways.

Materials such as concrete will cause more attenuation of wireless signal than wood.

In scenarios where wireless signals can propagate (the action of spreading) normally, there is no interference from other materials. However, there are some things that can alter the propagation of a wireless signal, causing it to behave differently and potentially become unreliable.

For example, a WLAN environment with metal surfaces may encounter unpredictability with wireless signal due to it reflecting off the metal.
Wireless signal can also be absorbed by certain materials like water or people, causing the signal to falter.

Being mindful of materials during the WLAN planning stage can help ensure the environment doesn’t hinder your wireless network and you have reliable connectivity results.

Co-Channel Interference

Different materials aren’t the only thing that can interfer with wireless signals.

Due to the 2.4GHz and 5GHz frewuency bands being unlicensed, there are no restrictions on people when extending wireless networks with access points.

This means that they can become crowded as well as channels not being assigned efficiently. Both of these issues can cause co-channel interference.

When planning your WLAN it’s important to take these issues nito consideration and plan your wireless network accordingly so as not to risk problems with wireless signal later down the line.

You want your WLAN to be as effective and efficient as it can possible be, which takes planning and wireless network knowledge.

Whilst the 2.4GHz is popular due to its propagation qualities due its waveforms passing through materials like walls more easily and reaching end users at a long distance. This however has meant that its become crowded with competing devices such as cordless telephones, baby monitors and bluetooth devices. This saturation can cause problems with your wireless signal.

In comparison, the 5GHz spectrum has greater availability and relaxed transmission power giving it more flexibility when it comes to wireless networks.

The 2.4GHz band has only 3 channels without any overlap, whereas the 5GHz has 24. This is another reason why the 5GHz band is favoured for high-density WLAN environments.

Understanding Frequency Channels

To ensure you can maximise the performance and scalability of your WLAN, you need to understand how these channels operate and use that knowledge to avoid co-channel interference.

Let’s take an Access Point as an example. An AP will have a specific bandwidth through which it will transmit and receive signals to and from other points. The channel assigned to the AP will be appropriate for the centre frequency of the first 20MHz channel used by the AP.

This bandwidth is specifically the frequency range over which the data signals are transmitted. Peak transmission and power is spread over the range of that bandwidth, with it dropping off at the edges.

These edges are then at risk of meeting other nearby wireless networks and are prone to interference from the ‘noise’ of these other networks.

It’s important to use what you know about channels to prevent the reduction of wireless signal speed and loss of scalability of your wireless network.

In order to minimise interference between neighbouring access points, choose to assign them with non-adjacent channels. Following this will make it easier to scale your network. If you don’t follow this principle, you will likely encounter problems with latency and throughput.

The best way of reducing interference when assigning WLAN channels is to carry out a Wi-Fi site survey. This involves analysing the noise levels across the spectrum so you can make informed decisions for your wireless network.

Call The Experts

If this all sounds a bit complicated, then why not give us a call here at Geekabit? We have Wi-Fi expert engineers working out of Hampshire, Cardiff and London who can take care of all your Wi-Fi woes.

From Wi-Fi site surveys, to planning and installation, we’ve got your WLAN covered. GIve us a call or drop us an email to see how we can help keep you and your business connected.

by admin
502 Views0
Home Network Home WI-Fi Optimising Home Network Remote Learning Technology Wi-Fi Wi-Fi 6 Wi-Fi Advice Working From Home
Amplifi Alien – The New Wi-Fi 6 Router from Ubiquiti

In this week’s blog we’re going to take a look at the new Wi-Fi 6 router from Ubiquiti – The AmpliFi Alien. With attractive performance features, this router could be great for a busy household working and learning from home as well as the intrepid gamer.

This Tri-Band Wi-Fi 6 router brings a revolutionary Wi-Fi 6 benefit into your home along with an elegant design.

What are the key features of the AmpliFi Alien?
  • Wi-Fi 6 compatible
  • It has a scalable mesh system. This is great for gamers! The Wi-Fi 6 standard Mesh system can easily cover any home, providing 4K/8K UHD streaming and online gaming to multiple users in any room
  • It has true Gigabit mesh
  • An 8×8 super antenna system
  • You could get up to 4 times your current network capacity (compared to an AmpliFi HD)
  • Boost your coverage by up to twice your current network (compared to an AmpliFi HD)
  • Reduce battery drain in mobile devices
  • It has 2.4/5 GHz Wi-Fi 6 and 5 GHz Wi-Fi 5 radios
  • From this single unit, they deliver a total capacity of 7685Mbps and 16 spatial streams
  • Build a virtually unlimited Wi-Fi capacity within your home by easily meshing multiple units over the air
  • It has a convenient touchscreen which displays the network status and provides instant controls
  • The AmpliFi Alien has a single Gigabit internet interface and internal power supply
  • It is integrated with a LAN switch with 4 Gigabit Ethernet ports
  • You can use Wi-Fi 6 for wireless connectivity and the LAN ports for local wired connectivity
  • It takes just one minute to set up using their easy-to-use app.

 

What performance features could make the AmpliFi Alien a good choice for remote working and home learning in a device heavy household?

There’s a lot of households across the UK that are suddenly finding themselves in a network nightmare at home. Families where both parents are working from home, plus multiple children doing home learning lead to multiple Zoom / Microsoft Teams / Google Meet video conferences all needing to happen at the same time. And this can cause some big issues with internet and Wi-Fi. The AmpliFi Alien has some performance features would be enticing for anyone currently in this predicament.

  • The Ubiquiti AmpliFi Alien is optimised to provide your home network with the highest possible performance – Irrespective of how many users or devices are connected at the same time
  • The AmpliFI Alien can eliminate dead spots and increase the total capacity in your home network by 4 times through utilising MU-MIMO and OFDMA for communication across 12 Wi-Fi 6 spatial streams
  • Got a video meeting you just cannot have interrupted by lag or loss of video? The AmpliFi Alien has 5Hz radio with Wi-Fi 5 (802.11ac) speeds which you can choose to dedicate to performance critical devices
  • Using the above features can help you to avoid competing for bandwidth with any other devices on your home network
Sounding good, but worried you don’t have the technical know-how to set something like this up?

The AmpliFi Alien comes with the AmpliFi App – A simple app that allows you to set up your network in just a minute. It’s user friendly yet full of controls and statistics to enable you to configure the AmpliFi Alien for your environment.

For more information and detailed specifications on the Ubiquiti AmpliFi Alien, head to their website.

What other products are in the Ubiquiti AmpliFi range?

The AmpliFi Alien is the latest router that Ubiquiti have added to their extensive range of Wi-Fi products. You can find out more about their range of products by heading to their website, plus see real-life reviews of how Ubiquiti AmpliFi products have changed home networks for the better including all the stats.

 

We don’t know about you, but we’re pretty excited to see the AmpliFi Alien in action!

 

 

by admin
870 Views0
Home Network Home WI-Fi Optimising Home Network Remote Learning Technology Wi-Fi Wi-Fi Advice Working From Home
Optimise Your Home Network for Remote Learning and WFH

Got network issues at home? Haven’t we all. Suddenly the majority of households are relying on their Wi-Fi a lot more.

 

Many of us are now working from home – We’re sat on Microsoft Teams, Google Meet or Zoom. Video calls for work aren’t the only thing clogging up your network – Odds are you’ve also got children sitting on virtual lessons, learning remotely.

We’ve gone from using our broadband to stream movies, scroll social media, send some emails and play games to families all using the bandwidth at the same time for multiple video conferencing all at once. Plus all those leisure activities on top!

So what can we do about it?

Understand Your Bandwidth

Here’s a little metaphor for bandwidth, in case you’re not familiar. Imagine you’re drinking through a straw. If you’re slurping on a diet coke, then it’s a simple suck. If it’s a milkshake you’re drinking then you’re either going to need more suction, or a bigger straw. Coke is speedy, milkshare can be slow.

If you’re sending a quick text-based email, it won’t need much bandwidth. If you want to press play on a 4K video and watch it immediately, then you’re going to need a bit more bandwidth.

Right now, with Zooms and other video conferencing taking centre stage in our home networks, we’re needing both upload and download bandwidth. For effective video conferencing you need both upload and download bandwidth capacity (you’re watching and transmitting video at the same time so you need Mbps both up and down).

Try doing a speed test (upload and download). To handle 2 or 3 Zooms at once, you’ll need around 11Mbps upload speed. Yo can also talk to your ISP to check how much upload bandwidth you have on your current plan. .

What Is Your ISP Giving You?

The more capacity you have, the bigger your bill will be.

If you are really struggling with your network, then consider chceking your plan with your ISP, and if needed, upgrade it to include more upload bandwidth. It’s also worth noting that you should also make sure that your ISP is capable of delivering these bandwidth promises. Most speeds to vary and are rarely guaranteed.

You may also want to check whether your ISP is ‘throttling’ you. If you are using (or trying to use) too much data, they may be restricting how much milkshake gets through your straw by biting on the end of it. Sometimes there is the option to pay a fee to stop them throttling you.

QUICK TIPS
  • Check your plan with your ISP
  • Consider upgrading bandwidth, if possible
  • Check you’re not being throttled
  • Check if your ISP offer dedicated fibre lines to each house or whether it’s shared between a cluster of homes

What If You Can’t Upgrade Your Plan To Get More Bandwidth?

Sometimes it’s not as straight forward as just upgrading your plan. It may be too expensive, or it may not even be possible in your location. Thankfully there are some things you can control within your home.

Let’s think about the devices that may be taking up bandwidth, but may not be needed all the time.

  • Smartphones – If you’re working on a video call or doing remote learning, then you probably don’t need your phone. It’s always doing things in the background. Switch them to Airplane mode when they’re not being used, or you know there are several of you trying to use video.
  • Smart TV’s – Let’s face it, Netflix and productivity don’t really go hand-in-hand (unless your Toddler is watching it while you work!). Any TV’s that are not in use, need to be powered down (not in sleep mode).
  • Wi-Fi enabled smart devices – Our homes are full of these nowadays. Anything using WI-Fi and running in the background can be switched off to try and save as much bandwidth as possible.
QUICK TIPS
  • Create a video schedule for your family and try where possible to avoid conflicts (both online, and offline…)
  • Schedule back-ups and auto-updates for during sleep time
  • Ban Netflix etc at capacity-critical times

What if none of this helps much – What then?

Consider Getting Wired

There is another way to optimise your home network – And that’s to run wires with ethernet cables.

A wired connection is always going to provide you with more reliability. It’s usually faster than wireless too!

We’re not suggesting installing wires all over your house – The situation we find ourselves in currently is only temporary. But if you’re happy to run cables along your skirting boards for a couple of months then great!

QUICK TIPS
  • If you can work close to your router then you can keep costs down by using a simple and relatively short ethernet cable from router to laptop.
  • If there’s no improvement when wired in, consider checking if your router is working how it should be.

For more ways to troubleshoot Wi-Fi problems at home, check out our previous blogs. You might find these ones particularly helpful!

Troubleshooting Your Home Wi-Fi

When Should I Use an Ethernet Cable?

Common Wi-Fi Problems and How to Fix Them

 

by admin
470 Views0

© 2019 GEEKABIT LTD | UK WI-FI CONSULTANT | WI-FI EXPERTS FOR BUSINESS | WI-FI HELP LONDON, CARDIFF, HAMPSHIRE | WI-FI ASSISTANCE HAMPSHIRE