Tag: mobile broadband

  1. Homepage
  2. mobile broadband
4G 4G Mobile Broadband 5G 5G Mobile Broadband Connectivity Mobile Broadband Mobile COnnectivity Mobile Network Mobile Network 4G Survey Mobile Network 5G Survey Mobile Provider Uncategorised Wi-Fi
Could 40% of UK 5G Mobile Connections Actually be 4G?

A recent study seems to think so. Current research with foundations in monitoring and examining mobile phone reception, appears to show that despite your handset indicating a 5G signal, it actually only has a 4G connection. 

Samples taken from UK testing showed 38% of connections were 4G, even though the 5G icon was being shown. 11,000 tests were carried out over a period of 2 months at the start of this year. 

Why would a handset indicate it’s connected to 5G, if it’s actually using a 4G connection? 

It can differ from phone to phone, but for many if the phone is connected to a base station that has 5G equipment potentially available, then it will show the 5G icon. However, in real usage terms the connection may be using 4G or 5G. 

Some phones will change the distinction of the icon depending on whether an actual 5G connection is made. Others will show the same 5G icon whether the 5G connection is only available or actually connected.

The above image shows an area map of Central London where testing was carried out. The red shows actual 5G connections, and the blue indicates where a 5G icon is displayed but a 4G connection is made. 

As you can see for yourself, a 4G connection being used under the guise of a 5G connection is a common one. 

This issue isn’t anything new, but what is new is the research looking at how this is impacting our connections in the UK. 

With an average speed of 49 Mbps, this recent study found when testing that mobile broadband via actual 5G is approximately twice as fast as where it’s a 5G icon only (27 Mbps). 

Is 4G masquerading as 5G happening across all UK mobile networks? 

The results from this study were taken from a sample across all the UK mobile networks. However, it did find that it was more common with some operators than others to display the 5G icon despite being connected to 4G. 

Let’s have a little look at each mobile network. According to study tests, when the 5G icon is displayed, what percentage of the time are you actually getting a genuine 5G connection?

Three UK:  94% of the time 

Vodafone: 93%

O2: 66% 

EE: 32%

These findings are surprising, as other surveys and studies have found EE to do well in 5G performance in terms of data and coverage.

It’s important to bear in mind that getting a 5G connection everywhere is likely not possible, and people would largely accept a 4G connection in its place where 5G isn’t a possibility. The important bit, perhaps, is the visibility to consumers in terms of what they are actually getting moment to moment. Customers should know whether they are connected 4G or 5G and not just shown a blanket 5G icon where there is merely potential. 

We’re all for using 4G in places where that connection is going to be stronger and more reliable than a 5G connection. But let’s make sure customers are aware when this is happening. 

by admin
15 Views0
4G 4G Mobile Broadband 5G 5G Mobile Broadband Mobile Broadband Mobile Network Mobile Network 4G Survey Mobile Network 5G Survey Mobile Phone Coverage Mobile Phone Coverage Survey Wi-Fi
Vodafone UK Named as London’s Best Mobile Network by Net Check Study

A recent network benchmarking study looking at 4G and 5G performance (for broadband and calls) across London has named Vodafone UK as the top performing network. 

Based in Berlin, NET CHECK completed their London study of mobile network performance and found that Vodafone achieved the highest number of ranking points – Scoring 932.83 out of 1,000 points.  

Who is NET CHECK?

NET CHECK was founded in 1999 to improve the quality of communication networks. Since then, NET CHECK has become one of the leading partners of network operators and infrastructure providers in the operation and optimisation of mobile and fixed communication networks of all technologies.

When and where was the network study conducted?

Between the 30th October and 7th November, a team from NET CHECK carried out a mix of performance based tests across all 32 London boroughs plus the City of London using Samsung S23+ smartphones. 

Covering 23 routes, the measurement technicians covered a distance of 1018km across Greater London whilst driving. The measuring equipment (SwissQual Benchmarker II (Rohde & Schwarz) and Samsung S23+) was placed in the roof boxes of two passenger cars collecting data on the performance of voice and data services during the tests. This approach allowed performance measurement for all the operators simultaneously and at the same locations. 

How did the network study allocate points?

As we said above, the maximum number of points a network provider can rank is 1,000. This is earned by a max of 350 points for voice services and a max of 650 points for data services. 

The testing involved a range of both voice and data services, with categories including:

  • Accessibility
  • Reliability
  • Speech quality  
  • Mobile broadband speed-tests using customer applications such as the browsing of popular web pages, video streaming and more. 

Sample wise, they collected approximately 15,700 data samples per operator to enable them to accurately analyse data services. For voice services, they made approximately 1,390 test calls. For each test call, they collected 12 speech samples which resulted in approximately 16,600 speech samples in total.

Which networks were close behind frontrunners Vodafone?

As we stated above, Vodafone ranked the highest in terms of points with 932.83 out of 1,000. 

Not far behind them was EE with 923.45 – Only about 9 points less than highest ranking Vodafone. 

In 3rd place it was O2 Virgin Media  with 834.16 points, with Three UK trailing behind its competitors with 757.82 points. 

You can see a summary of results from the study below. To have a read of the full report, head here.

With thanks to NET CHECK for all the tables and imagery, directly from their report.

by admin
14 Views0
5G Mobile Broadband Mobile Network
What are the Weaknesses in UK 5G Mobile Deployments?

 Independent British political public policy think-tank the Social Market Foundation has released a new report ‘Growing Connections’ highlighting how the UK still has a while to go before achieving prevalent 5G mobile connectivity. 

What’s the reason for this? The report claims that this is partly due to investment being unintentionally hindered by previous mobile telecoms policies. Solving this isn’t likely to be easy or straightforward. 

Data from Ofcom earlier in the year (January 2024) revealed that 85-92% of UK premises can now get outdoor 5G coverage from at least one operator. When combining all operators, this figure for outdoor coverage drops to just 16-28%. 

Ofcom doesn’t currently offer a figure for 5G geographic coverage, but we’d imagine that it would be quite a bit lower than the aforementioned 85-92%.

The new labour government has reiterated a previous pledge by the last in power where “all populated areas to be covered by ‘standalone’ 5G (5G-plus) by 2030.” Labour plan to follow through with a renewed push to achieve the ambition of full gigabit and national 5G coverage by 2030. 

UK Trailing Many Countries When It Comes to Active 5G Connections

‘Growing Connections’, this new report from SMF, looks at crowdsourced data from Opensignal in 2023, which showed that 5G availability and the amount of time users spent with an active 5G connection, found that the UK was trailing behind many other countries. 

Did you know that UK mobile users have access to 5G around only 10% of the time? In comparison, other countries show figures of:

  • India (43%)
  • South Korea (38%)
  • France (20.6%) 
  • Italy (17.9%) 

Further data from Opensignal was used in the report, looking at the analysis of international 5G download speeds. The UK, again, is amongst the slowest, with a score of 111Mbps. That might not sound too awful, but when compared to some other countries (like 133Mbps in Italy and a whopping 437Mbps in South Korea) it finds the UK lacking. 

The UK was one of the first countries to start rolling 5G technology out, so it is rather disappointing to see that we are considerably behind other countries. 

Furthermore, the SMF report also highlights how findings from another study had shown that, by 2035, “widespread availability and use of 5G could add £159 billion to the UK economy“. That’s a big thing to potentially miss out on. 

But let’s remember that the world doesn’t yet revolve around 5G. Predictions such as this should be taken carefully, especially as we have good 4G services that do deliver many of the benefits we’ll get from 5G. 

So What Went Wrong for the UK When Starting the Deployment of 5G?

Previous Mobile Telecom Policies

As we touched on earlier, the report mentions investment being hindered unintentionally by some policies in the mobile telecoms sector. We found it surprising that the report didn’t specifically mention the decision to ban Huawei after the beginning of the rollout, which set the deployment plans back with a pretty significant blow to mobile operators. 

Mobile Spectrum and Investment

The report does instead discuss the approach to spectrum by the Government and Ofcom, looking at the associated high costs involved with accessing and using mobile spectrum alongside the shortness of spectrum licences that are awarded. This in turn then deters the ‘very long-term investment’ and makes it ‘less useful as an asset.’

Slow Release of Spectrum Bands by Ofcom

Ofcom has also been slow to release more spectrum bands for 5G. Other countries around the world have had access to mmWave bands for years, yet here we are in the UK still waiting for mobile operators to have this same access. 

Cost Cutting Exercises Result in Less Land for Infrastructure

The SMF report mentions how making it cheaper for Mobile Operators to operate mobile masts (ie. cutting the costs of building infrastructure) has actually resulted more land disputes between landowners and builders, less land being supplied for said infrastructure and an increase in expensive litigation. 

Planning System Delays

Delays in the planning system have been well documented, with objections to new masts from the public and the reluctance to resolve these causing complex situations. 

The roll-out of better broadband and mobile networks – especially those in remote, rural, hard to reach areas – Must be supported by those in powerful positions. There needs to be a balance. 

Mobile Operator Mergers

Another limiting factor to investment is the low level of profitability for mobile networks. The SMF report looks at the encouragement of consolidation and mergers (such as that of Vodafone and Three UK), but the evidence of the success of this is a mixed bag. 

The CMA (competition watchdog) have noted that whilst mergers will reduce competition between operators, it could also cause a hike in prices for consumers. Apparently there are negotiations taking place to try and address this potential issue. 

Report Supporters

It’s important to note that the SMF report was supported by APWireless – A company viewed by operators as being a land aggregator. They seem to adopt a lease premium model that would involve buying out the expiring leases from landowners and then charging a higher cost to mobile operators for that same land lease. 

A company with a business model such as this would perhaps not welcome the possible plans from the government looking to reform the Electronic Communications Code. This code governs land and property access.

What’s the conclusion for UK 5G deployment weaknesses?

Whilst the report is a high level summary of the current problems facing the UK rollout of 5G, it doesn’t go as far as making suggestions or recommendations of what to do about it. 

It is also potentially influenced by the perception of a company with a vested interest in the areas being discussed. It certainly makes an interesting read, with the added opportunity to flex your critical thinking skills. 

by admin
20 Views0
Uncategorised
How Do I Choose a 4G/ 5G External Broadband Antenna?

Wi-Fi has quickly become something we expect to have available (basically at all times). We rely on Wi-Fi for so many things, both at work and in our homes. From Smart Home devices, to connecting via our phones, tablets, laptops and gaming systems – We need our Wi-Fi to be fast, dependable and strong. And boy do we notice when it’s not. Signal dropping out, buffering, dead spots – It all gets very frustrating when Wi-Fi isn’t working. 

The vast majority of UK premises are lucky enough to connect to superfast broadband through a wired connection, but there are also many rural homes that cannot access and connect to broadband or internet in this same straightforward way. 

Here at Geekabit, our team of Wi-Fi engineers work with lots of businesses who struggle with the more traditional ways of connecting to the internet. And what do they do? They turn to mobile broadband through 4G and 5G. 

And thankfully, there are many rural business premises within range of a strong enough UK mobile broadband network.

Can’t connect to superfast broadband? An external antenna could be the solution

Unfortunately, despite access to mobile broadband being available to many rural businesses, a stable connection to it isn’t always a given. If you are one of the more remote rural businesses that find themselves struggling to connect to mobile broadband and are:

– Unable to connect to a decent fixed line ISP 

– Within range of a mobile broadband alternative but find it unstable on various operators

Then you might find it beneficial to get an external antenna installed. But which one do you need? 

Can I install an External Mobile Broadband Antenna myself? 

In terms of actually installing an external antenna, it’s actually pretty straightforward. All you need to do is choose a high, stable location on the outside wall of your house near the roof, and screw the antenna on. Remember to make sure it’s pointing in the right direction (ie. towards the nearest mast). 

You might also choose to mount your antenna on a pole to raise it higher than your house. If you’re going for this option, always make sure that it is stable and won’t cause any damage to the building you are mounting it to. It’s also worth liaising with your local authority before installing a large pole as in some areas, a tall pole could be in breach of planning rules. 

You will also need to drill the cable into the house – It’s very important to avoid any other electrical cables and water pipes whilst you are doing this as well as sealing up the holes afterwards. 

It’s also pretty important to keep the position of your router in mind. Will it be placed near the where the cable feeds into the building? Ideally, the cable between your antenna and router needs to be 5 metres or less otherwise you could find yourself struggling with interference and/ or signal loss. 

If that all feels a little daunting then you can hire a professional installer to do the job for you – Our expert Wi-Fi engineers here at Geekabit can do just this! We operate out of Hampshire, London and Cardiff.  

Whilst the physical aspects of installing an external antenna are quite straightforward, it’s not always easy to choose the right kit. The radio spectrum is variable by nature, which makes it very dependent on your environment. You might manage to install the antenna but not get the outcome you were expecting. 

What antenna you need depends on your specific location and needs. This blog will outline some of the options that could be right for you. Sometimes it’s a case of trial and error to find the right antenna for you – But that’s where it might be best to leave it in expert hands. 

Do I need an Omni-directional or Directional antenna?

When it comes to installing an external antenna, the first thing you need to decide is whether you need an Omni-directional antenna or a Directional antenna. 

Choosing a Directional antenna

If you know where your nearest mast is and have a clear line of sight, then the Directional antenna might be the one for you. Whilst it’s weaker in other directions, the Directional antenna will have higher reception in one direction, hence why it works well for a clear line of sight with the mast or base station. This is often the better choice if you live or work in a rural area. 

What problems can you have with a Directional antenna? 

Using a Directional antenna can run into issues if the station is congested or goes out of service. E.g. during upgrades. 

Choosing an Omni-directional antenna

If you live or work in a more urban, built up area and aren’t sure where the nearest mast is then an Omni-directional antenna could be the better option for you. Whilst they have a lower overall gain, they are able to attract similar reception from all directions. Because the Omni is looking at a wider area, you may find that it provides better reliability. 

Generally, if you are finding and installing an external antenna yourself, then the Omni-directional antenna is probably the one to try first. 

What problems can you have with an Omni-directional antenna? 

It’s possible that because it’s looking at a wider area, the Omni could attract more interference. If you are able to utilise a well positional Directional antenna then you could get better performance that way. 

How much power does my external antenna need?

So you’ve decided whether you need an Omni-directional or Directional antenna. What do you need to consider next? 

You’ll notice that antennas have gain figures in dB / dBi – This is how the power of the antenna is measured. 

In simple terms, the gain of an antenna is the relative measure of its ability to direct radio frequency energy in a certain direction or pattern. What do the gain (dB / dBi) figures on an antenna mean?

We could go into a lot of complicated detail here, but seeing as we’re writing this blog for someone looking to buy and install their own external antenna, we’ll keep it super simple. 

Basically, the higher the gain (dB / dBi) the better the antenna’s performance and range. Obviously, the higher the gain, the more expensive the antenna will cost. 

When you are at this stage of choosing your antenna, it is worth knowing what bands your mobile operator uses so that you can ensure how the different gain values given for an antenna correspond to the spectrum band you will be using. 

Choosing an external antenna – What are the challenges?

As we said above, when you are installing a new external antenna, it’s really important to know:

  • Where and which direction the signal is coming from 
  • How strong the signal is
  • Which bands are being used in your local area by local operators

These are some of the biggest challenges you’ll face when installing your antenna. 

How can I find out the spectrum information I need to choose an antenna?

If you go online to mobile operator’s websites you can find coverage checkers (Vodafone, Three UK, O2 and EE (BT)), but these can be rather vague and not always accurate. It’s worth comparing to what Ofcoms Mobile Coverage Checker says too.

Perhaps the best way to identify which bands are being used by your local operator is to download a relevant app or look up the mobile network details on your Smartphone or router. 

These apps will often just tell you the band number for your own operator rather than tell you the spectrum frequency. You’ll find that operators tend to own several bands, but usually use one band for national connectivity. 

What are the most common 4G Mobile Bands in the UK?

800MHz (Band 20)

900MHz (Band 8)

1800MHz (Band 3)

2100MHz (Band 1)

2300MHz (Band 40)

2600MHz (Band 7)

Remember that 5G uses a different band model and is currently only deployed on the 3.4GHz band. 

How do I know where my nearest mast is for installing my new antenna?

So you’ve made sense of the bands on offer in your area from local operators. Next you need to work out where your nearest mast is and whether it’s the most appropriate for your location. Unfortunately it’s not always the option that looks most logical! 

When you’re choosing the most appropriate mast for your use, you need to consider the following:

  • Forms and features of local land surfaces (artificial and natural)
  • Local surroundings
  • Operator choice

There are apps and websites that can help with this such as Mastdata.com and Cellmapper.net. The Opensignal app could also be of use.

Did you know that operators also have sharing agreements with each other? Just to make things a little more complicated. For example, there is a sharing agreement between Vodafone and O2 as well as between EE and Three. What does this mean? Well it means that a mast could be serving more than one operator. 

How do I use signal strength information to position my external antenna?’ 

If you are able to gain an understanding of signal strength in a few different measurements, then you are more likely to position your antenna correctly. 

Signal strength is measured in quite a few different ways, so we’re going to just focus on a few that you are most likely to encounter. These are:

  • Received Signal Strength Indicator (RSSI)
  • Reference Signals Received Power (RSRP)
  • Reference Signal Received Quality (RSRQ)

These measurements are given by a negative dBm (decibel milliWatts) value. In this situation, negative values are actually good (most of the time). They are negative because they represent tiny yet positive numbers on a logarithmic scale, making them easier to consume. For example, -100dBm would be 0.0000000001 mW.

What is a good RSSI signal? Essentially, the closer to 0 dBm, the better the RSSI signal (although it does get more complicated past a certain point with diminishing returns of data speed). An example of excellent 4G RSSI signal would be -65 dBm. A poor RSSI signal would be -85 dBm. 

RSRP works on a similar scale to RSSI, where an excellent 4G RSRP signal would be -80 dBm.  

RSRQ operates on a very different scale, which means that an excellent signal is anything from around -10 dB (not dBm) and a poor signal would be -20 db.

Interestingly, most mobile modems are able to maintain a pretty fast data connection using a poor signal. Problems may arise however in more rural areas where speeds are slower and stability poorer due to the distance from a mast. 

What factors are most likely to affect signal strength? 

  • Distance to mast
  • Interference from competing signals
  • Router band switching
  • Physical obstacles in the environment like buildings, tall trees etc
  • The weather

Of course, these factors are not in your control, but you need to bear them in mind when positioning your antenna in order to get the best signal possible. 

Feeling confident about choosing and installing your external antenna?

If you are about to choose and install an external antenna to improve your 4G or 5G mobile broadband signal, then hopefully this blog has given you some of the basic information you need to make your decisions. 

If you’re still feeling a bit daunted, then why not get in touch with one of our Wi-Fi experts? We install mobile broadband for clients in and around Hampshire, Cardiff and London and can help identify which antenna solution would best suit your needs. Get in touch today! 

by admin
4 Views0
4G 4G Mobile Broadband 5G 5G Mobile Broadband Broadband EE Mobile Broadband Mobile COnnectivity Mobile Network Rural Broadband Wi-Fi
Top UK Mobile Networks for H2 2023 Revealed by RootMetrics Benchmark

How did UK mobile networks perform in the second half of 2023 when it comes to 4G, 5G and mobile broadband?

RootMetrics (now an Ookla company), a mobile analyst firm, has not long published their latest benchmark study of UK mobile networks (4G and 5G) and mobile broadband performance for H2 2023. 

RootMetrics offers scientifically collected and crowdsourced mobile network performance information to consumers and the industry. The firm captures user information by testing network performance when consumers are using their mobile phone for voice or data communications. 

Results of the latest biannual benchmarking report which once again see EE (BT) come out on top against their UK network rivals at Vodafone, Three UK and O2 (VMO2). 

Which UK mobile network is the best for 4G/5G?

When it comes to 5G performance, the picture painted by this recent report isn’t so clear-cut.

This latest study used data from a 5G-enabled, latest model of Samsung smartphone (the actual model was not disclosed in the report). It was purchased from operator stores and tested for both 4G and 5G performance across all 4 primary UK operators within 16 of the most populated UK cities. 

In summary, the study consisted of:

  • 1 latest model Samsung smartphone
  • 4 primary UK mobile operators
  • 16 UK cities
  • 634,942 tests across hundreds of locations
  • 788 locations were indoor
  • 24,179 miles driven during both the day and night

Results were divided into the following categories:

  • Network reliability
  • Speed
  • Data
  • Call and text quality

Scores were given out of 100 (100 being the highest score). As you can see from the data representation from RootMetrics below, EE came out on top across all categories, while VMO2 were found at the bottom of most. 

Interestingly, every one of the 4 primary UK operators saw a decrease in their overall scores when compared to the last RootMetrics report 6 months prior. 

The Overall Scores for H2 2023 (vs H1 2023), in order of best to worst, are:

1. EE – 94.2 (down from 95.9)
2. Vodafone – 90.1 (down from 92)
3. Three UK – 89.3 (down from 90.2)
4. O2 – 86.4 (down from 86.7)

So which is the best UK mobile network? When we look at the average (median) UK download speeds for both 4G and 5G networks, then the strongest data speeds were delivered by EE (68.6Mbps, which was up from 65.1Mbps in the last report).

Vodafone also saw an increase in data speeds, increasing to 34.5Mbps (from 29.4Mbps). Despite O2 improving their data speed score from 15.5Mbps to 19.9Mbps, they still scored the bottom of the 4 providers. Just behind Vodafone to take 3rd place, Three UK fell slightly to 32.3Mbps (down from 34.7Mbps). 

How is 5G performing on UK networks so far?

However, when we look purely at 5G networks, we see a bit of a different picture emerge when compared to the previous report for the first half of 2023. 

Whereas H1 2023 saw Three UK as the fastest median 5G download performance, that award now goes to EE. O2 were unfortunately at the bottom with a score well below the other 3 primary UK networks. The scores for median download speeds for 5G from the H2 2023 report were:

  1. EE – 174.1 Mbps
  2. Three – 165.7 Mbps
  3. Vodafone – 158.3 Mbps
  4. O2 – 68.7 Mbps

What is the availability of 5G on UK mobile network providers? 

As well as 5G speeds, the availability of 5G across UK networks was also tested. 

All 4 of the UK mobile network providers had 5G availability of over 52% during this latest UK wide testing. 

The UK providers in order of 5G availability are:

  1. Three – 57.6%
  2. O2 – 54.5%
  3. EE – 52.3%
  4. Vodafone – 41.9%

You can find more data below for particular regions as well as the most improved cities. 

What can we take away from this report on 5G speed and availability on UK mobile network operators?

So it would seem that even though EE has the fastest 5G speeds, that 5G connection is less available than that of its competitors Three and O2. 

Despite coming second place in terms of speed, Three weren’t too far behind EE and are also slightly more available. 

O2 might have decent 5G availability, but the speed of that connection is pretty dire according to this latest report. 

In terms of 5G speed, Vodafone aren’t too far behind rivals EE and Three, however they are at the bottom of the pile with the lowest 5G availability. 

What more would we like to know about 4G/5G connections across the UK mobile networks? 

If you’d like to read more on this and see further data, head to the full report from RootMetrics UK Mobile Performance Review 2H 2023 here. 

Whilst this review does shine a light on 5G speeds across the UK and how UK mobile networks are performing, it does only give select information. 

It would be interesting to also see how the networks perform when it comes to upload speeds and latency using 4G/5G connections. 

As you can see from the review, there seems to be a strong focus on urban areas across the bigger cities in the UK. Here at Geekabit we talk a lot about the struggles of rural businesses and more remote locations that still need strong 4G/5G mobile broadband connections. Some more data on the performance of UK mobile networks in these areas would be beneficial and would give a clearer picture of 4G/5G availability and speed across the UK as a whole. 

by admin
11 Views0
4G 4G Mobile Broadband 4G Router 5G 5G Mobile Broadband 5G Router Broadband Broadband Speed Business Broadband Speeds Business Wi-Fi Connectivity Mobile Broadband Project Gigabit Satellite Broadband Satellite Internet Starlink Wi-Fi
Is Your Business the 1 in 5 with Insufficient Internet Speeds? 

Business leaders and decision makers from 160 UK companies were surveyed on their businesses broadband speeds during June 2023 by Neos Networks – 1 in every 5 were found to have broadband speeds that were insufficient. 

Furthermore, 42% of those surveyed planned to move to a higher capacity connection during the next two years as part of their key growth plans. 

Investment in Connectivity

Over the previous 2 years, 11.2% of respondents who had already invested in connectivity said it had a direct impact on their business profitability. 

And it’s not just profitability that’s impacted by good connectivity in business. 98.3% of surveyed businesses said it also impacted:

  • Productivity
  • Staff retention
  • Client collaboration

Why Are Businesses Prioritising Higher Capacity Connectivity?

Why might businesses prioritise higher capacity connectivity? Better performing broadband impacting many parts of the business, including:

  • Increased computer power (22.4%)
  • Operational development in terms of more data and higher capacity requirements (21.2%)
  • Greater device usage for each employee (11.6%)

With the prevalence of AI being used in business, this also influenced decisions to improve and increase connectivity with 1 in 10 businesses actively looking to increase connectivity in order to better integrate AI into their business processes.

What Is The Negative Impact of Insufficient Broadband Speeds in Business?

Poor internet connectivity, speed and/or reliability doesn’t just negatively impact employee productivity and retention, it can also cause businesses to risk losing a customer or client. 55.6% of businesses surveyed felt like they were at risk of losing custom down to poor internet. 

Has Project Gigabit Had A Notable Impact on Business Broadband?

The businesses being surveyed were asked if they felt their business had felt a notable impact from Project Gigabit, of which 52.5% said yes. 

Project Gigabit is a £5 billion government broadband plan aiming to deliver next-generation gigabit broadband to over a million households and businesses across the UK. You can read about their progress here. 

Project Gigabit didn’t actually start to award contracts until August 2022, so it’s possible that the above percentage figure is reflective of respondents including other similar schemes (like the Gigabit voucher and GigaHubs Dark Fibre) or other commercial upgrades to broadband services. 

Let’s Focus on the Positives

It’s clear that businesses are seeking high-capacity connections to keep up with new technologies as well as support their employees and customers. 

Of course, businesses that are based in more rural areas may well be part of the 1 in 5 businesses without sufficient broadband speeds that need improved network accessibility to achieve better connectivity. Other means of connecting to the internet may be useful, such as mobile internet through the likes of 4G/5G routers or Satellite broadband like Starlink. 

But if 1 in 5 businesses don’t have sufficient broadband, that means that 4 in 5 do! Recent data from Think Broadband suggests that only 21% of UK premises are yet to be reached by gigabit-capable broadband. That means 79% of business premises in the UK are covered by a broadband connection that is gigabit-capable. 

By 2030, the UK government is hoping to reach their target of having nationwide coverage. Network operators are hoping for more support so that they are able to help businesses with poor connectivity sooner than that. 

Rural businesses may be able to improve their connection through AltNet options. AltNet are alternative network providers offering fibre broadband packages. Although smaller in scale, AltNets compete with the UK and England’s big brand internet service providers. AltNets offer their own full fibre connections and don’t rely on the Openreach network and can sometimes offer higher upload speeds in comparison to the major network providers.

This could mean that rural businesses in hard to reach locations could have access to better internet services sooner than the national telecoms provider can offer, giving them next generation speeds like 2.5, 3 and 10 gigabit services across certain networks before national providers have even started trials. 

Let’s also remember that even though 1 in 5 businesses are receiving insufficient broadband, that doesn’t necessarily mean they don’t have access to it via other networks. There might be other options to the one they are currently using. 

The broadband demands of differing businesses also vary hugely. A graphic design studio or video editing company would need higher speed internet than a takeaway shop that could rely on a slower link. 

As always, these types of surveys should be taken with a pinch of salt. Whilst it is undeniable that there are 1 in 5 businesses with insufficient broadband, there should be options for them to explore like mobile broadband and satellite broadband like Starlink. 

Can we help your business improve its broadband connection?

If your business is struggling with a poor internet connection, then get in touch with our expert Wi-Fi engineers who will be able to advise if mobile broadband or Starlink satellite broadband could be a viable option for you. Give us a call or drop us an email today and let’s get it sorted. 

by admin
9 Views0
Broadband Fibre Broadband Fibre in Water FTTP Mobile Broadband Project Gigabit Rural Broadband The Shared Rural Network
What is the ‘Fibre in Water’ Trial and Will Fibre Broadband Run Through Water Mains?

For the past year, the DSIT have been trialling ‘Fibre in Water’ in Yorkshire. Fibre has been run along 17km between Barnsley and Penistone to see whether fibre optic (FTTP) broadband cables could be deployed through live water mains. 

The £6.2m trial has just completed its first phase, with the DSIT releasing current progress and what they’ve learned so far, with one year left to go of the trial. 

The theory behind the ‘fibre in water’ trial is that fibre broadband could reach 8,500 more rural homes and businesses without needing to do disruptive and costly street works. Not only that, the fibre could provide capacity to local 5G mobile masts as well as monitor any leakages on the network. 

What is ‘Fibre in Water’?

The main concept behind ‘Fibre in Water’ is to deploy fibre optic cables through live drinking water mains, monitoring them for leakage. It would also mean that broadband companies could use the water network to deliver gigabit connections to any homes and businesses along the water route that the cables were deployed in. 

If you’re wondering whether it’s safe to be putting fibre-optic cables alongside water, then don’t worry! The fibre cables will be inside ‘messenger pipes’ to make sure that they don’t touch the water and are protected. 

The messenger pipe is deployed whilst water is in normal operation so that the pressure can be used to deploy an initial draw line. The installation is completed by blowing the fibre-optic cable into the messenger pipe. 

What do they hope to achieve with the ‘Fibre in Water’ project?

The £6.2m project began in 2021 and is expected to reach completion in 2024 – Taking it from a pilot schemed to facilitate delivery. The aim is to deliver advanced broadband and mobile services to rural locations via mains water. 

Led by the DSIT (Department for Science, Innovation and Technology), the project is also supported by Defra (Department for Food, Environment and Rural Affairs) as well as the Geospatial Commission. 

There are various objectives to the ‘Fibre to Water’ project, a few of these are:

  • To support the Project Gigabit and Shared Rural Network schemes by connecting the hardest to reach areas of the UK with advanced fixed and mobile services (such as gigabit, 4G and 5G)
  • To reduce the amount of clean water leakage from the water mains (approximately 3 billion litres of clean water is lost per day)
  • To support the digital transformation of the water industry in the UK

What are the challenges of the ‘Fibre to Water’ project?

This project sees the merging of two separate industries, so is of course going to meet its challenges. 

It’s a complex endeavour to safely bring together fibre-optic cables and water pipes in one place. Hence why DSIT, Defra and Geospatial Commission are all involved. Not only does it have to meet regulatory frameworks but also has to reflect a sensible cost for all bodies. 

Project TAWCO was formed – Telecoms and Water Combined Operations – Consisting of Yorkshire Water, Commsworld (telecoms operator), the University of Strathclyde as a research organisation and Arcadis as a Design and Engineering Consultancy. 

They proposed a route that would enable them to put the operational and commercial models to the test – Going from Barnsley to Penistoke. 

What does the ‘Fibre in Water’ project consist of? 

The project is split into 3 phases, the first of which has just reached completion. 

Phase 1

This phase has focused on the research and investigation elements to inform later deployment. It had to look at the technical, commercial, legal and maintenance aspects of everything – as well as the benefits – before being able to present findings to the government. Only then can it move into Phase 2 and 3. 

Phase 2

The second phase will look at the design and build elements of the project, including deployment of the final design. It will also include data collection and the accrual of benefits. 

Phase 3

The final phase will evaluate how the project has performed and how it can be scaled up in line with the analysis results from Phase 2, with a view of rolling out this solution on a national scale. 

What has been learnt from the 1st phase of the ‘Fibre in Water’ project?

Now that the first phase is coming to a close, the project has shown that this is a successful model, commercially viable, between the two industries. 

It would seem that there is an investment opportunity for fibre in water, with a host of benefits for not only the industries but customers too. 

European markets are seeing expansion in this area, with a rise in fibre in water technology and monitoring software solutions. More suppliers here in the UK are looking to gain approval for their offerings. As with all industries, competition in this area will drive innovation and technical improvements further as well as keep prices down.

The telecoms market is a competitive one, so Fibre in Water is likely to be another way for these companies to get broadband services to homes and businesses and provide better options for consumers. 

One issue highlighted by the Phase 1 survey was having to gain access to private landowners along the proposed route. Not only would this be a potential risk, it would also cost money due to compensation negotiations. 

A way to avoid this was to alter the route for the trial, reducing it to 8km of ‘fibre in water’ and avoiding the need for private access. Whilst this mitigated the risk and cost, it also means that the number of rural premises being reached is less, down to 7000. 

Will the proposed ‘fibre in water’ trial go ahead? It’s expected that a decision will be made imminently by the DSIT and other government partners alongside Project TAWCO. 

Could this be an exciting development in getting reliable broadband to rural areas? We might well find out next month – Watch this space. 

Rural Wi-Fi Options with Geekabit

In the meantime, if you’re struggling with your broadband in a rural home or business then get in touch with our Wi-Fi experts today. We have extensive experience with 4G and Mobile Broadband – Bringing you a more reliable connection in rural premises. Read more on our website and get in touch today.

by admin
19 Views0
4G 4G Mobile Broadband 4G Wi-Fi 5G 5G Mobile Broadband 5G Wi-Fi Broadband Hampshire Mobile Broadband Mobile COnnectivity Mobile Network Mobile Phone Coverage Mobile Reception Wi-Fi
London Underground: 5G Deployed by Virgin Media O2 UK 

Last month, VMO2 became the last of the four primary mobile providers to begin their deployment of their ultrafast 5G mobile broadband service on the London Underground. 

Their 5G mobile broadband has been deployed on the:

  • Central Line – Between Queensway and Holland Park
  • Northern Line – Between Kentish Town and Archway 

5G Mobile Broadband on the Central Line

If you are a commuter on the Central Line, the Underground tunnels between Queensway and Holland Park now have 4G and 5G services following the new roll out. 

You should experience seamless connectivity when travelling through these stations. 

Nestled between Queensway and Holland Park is Notting Hill Gate Station, which has now been upgraded to be a fully 5G station. This means that Central Line platforms and ticket halls at this station will now have this latest mobile network available. 

The stations at Queensway and Holland Park have now had 4G introduced. 

With thanks to https://www.london-tube-map.info/central-line/ for the image

5G Mobile Broadband on the Northern Line

As a commuter on the Northern Line, you should now be able to connect to 5G from Archway to Tufnell Park stations. 

Kentish Town station will also now have 4G connectivity. 

With thanks to https://www.london-tube-map.info/northern-line/ for the image

Shared Platform from Boldyn Networks 

The same network platform from BAI Communications (Boldyn Networks) is being shared by all of the primary operators.

Transport for London have a 20 year concession deal with BAI. This allows them to build the infrastructure needed for fibre-fed mobile connectivity, and then make it available via wholesale. 

Revolutionised Commuting in the Capital

Having Underground connectivity has long been a dream for commuters travelling around London using the tube. 

Chief Commercial Officer for VMO2, Gareth Turpin, says:

“For the first time, our customers can access the latest 5G mobile services deep under London. This is set to revolutionise commuting in the capital, and in the weeks and months ahead we’ll be rolling out ultrafast mobile services at more Tube stations, in tunnels and on platforms to bring high-speed connectivity to our customers as they travel on the Underground.

This is part of our commitment to upgrading the UK and ensuring customers can access our network wherever they are.”

When will all of the London Underground have 4G / 5G mobile broadband connectivity?

The network coverage is set to expand further throughout this year. 

Back in 2020, earlier work by TfL and other mobile operators meant that there are already 4G services on the Jubilee Line between Canning Town and Westminster stations. 

Last month we saw the additions on the Central and Northern Lines outlined above. 

The target is for ticket halls, platforms and Underground tunnels throughout the London Underground network to have 4G and 5G connectivity by the end of 2024. 

Keep your eyes peeled for further announcements! 

Could Mobile Broadband Be Right For You?

If you think your rural home or business could benefit from 4G / 5G mobile broadband then please get in touch with our Wi-Fi experts. We operate across the South of England out of Hampshire, covering West Sussex, Dorset and the Isle of Wight. We are specialists in designing and deploying mobile broadband networks for those who struggle with the more traditional forms of broadband internet. 

by admin
24 Views0
4G 4G Mobile Broadband 5G 5G Mobile Broadband Mobile Broadband Mobile Network Mobile Network 4G Survey Mobile Network 5G Survey Mobile Phone Coverage Mobile Provider Mobile Reception Mobile Signal Strength Wi-Fi
Which UK City has the Fastest 5G Speeds? 

Opensignal, an independent global organisation who offer reports and insights into the world’s communication networks, have this month published data revealing the UK’s fastest locations for 5G mobile broadband.

The fastest city for 5G download speeds is Birmingham, coming in at 162.7 Mbps. The fastest region was the West Midlands with 151.4 Mbps 5G download speeds. 

Where does the data come from? 

The numbers in this report come from data collected across hundreds of thousands of devices like Smartphones between November 1st 2022 and January 29th 2023. Primary mobile network operators were then compared across different categories. 

Is 5G faster than 4G?

The study also reported on the uplift in mobile broadband speeds when devices went from a 4G to 5G network in various locations. 

The majority of users found 5G download speeds to be between 3.7 to 5.5 times faster than 4G. The biggest uplift was found in Reading, Berkshire where users enjoyed 5.5 times faster speeds on 5G. London however saw the lowest uplift at a rate of 3.7 times faster than 4G. 

With thanks to OpenSignal for the image 

Is 5G or 4G better in urban or rural areas? 

The report also studied the differences between rural and urban areas when it comes to 5G. You might think that there would be a difference in uplift between these types of areas, but there was actually little difference. For rural areas with 5G, the uplift was 4.7 times faster. In urban areas, the uplift for 5G was 4.5 times faster. 

With this being said, mobile broadband users in urban areas do see significantly faster download speeds on both 4G and 5G networks than those in more rural areas. On 4G networks, download speeds are 23.7% faster (5.8 Mbps) in urban areas. On 5G networks, download speeds are 20.1 Mbps which is 17.6% faster than rural areas. 

5G networks are more limited in rural areas with less coverage. Unsurprisingly, this means that users on a 5G network in an urban area spend more time with an active 5G connection than rural users (9.6% and 6.6% respectively. 

With thanks to OpenSignal for the image 

Where in the UK do users connect to 5G the most?

It will probably come as no surprise that it’s Londoners who are actively connected to 5G networks for the longest.

Unfortunately for us (as we’re based in Hampshire) the South East and South West come very near the bottom of the table when it comes to 5G availability and time spent connected to the network. 

Will mobile network coverage improve in rural areas?

As we mentioned above, the data from this report does reflect on there being a gap between the mobile experience of users in rural and urban areas. 

Thankfully, there is ongoing commitment and work happening to try and improve mobile connectivity in rural areas. 

The UK government and mobile network operators are currently working together on the Shared Rural Network programme to increase the geographic coverage of 4G networks. 

Last year in their 2022 Connected Nations report, Ofcom found that through the SRN and other initiatives, users should be able to get good mobile coverage from at least one operator across 92.2% of the UK. This is a rise of 0.3% from the year before so things are moving in the right direction.

by admin
25 Views0
Uncategorised
4G and 5G Mobile Broadband Antennas: Frequently Asked Questions

Last week we blogged about 4G and 5G antennas – How to choose them and how to install them. If you are planning to choose and install your 4G/5G mobile broadband antenna yourself, then you might end up asking one or more of the below commonly asked questions. 

As always, if you’re feeling unsure about which antenna you need or how best to install it, then perhaps consider calling in the experts.

Otherwise, let’s have a look at some of the questions that might arise when you’re installing a new 4G/5G mobile broadband antenna. 

4G/5G Mobile Broadband Antennas – Frequently Asked Questions and Handy Hints

Q: My antenna works better on a window than it does outside – Why is this?

Unfortunately when it comes to installing 4G/5G mobile broadband antennas, the most logical solution isn’t necessarily the right one for your property. Hence why sometimes you might find that despite doing everything correctly, you find that your signal and data speed is better indoors (e.g. from your smartphone) than it is the correctly positioned external antenna. This could include getting a better signal and speed from an antenna on a window rather than the top of your property. 

If you find yourself in a situation like this, then the best course of action is to understand the signal readings and bands being used as best you can at various locations around your property. 

Remember that; 

  • Mobile signals can be affected by lots of things – Such as reflections from environmental objects and even the weather. 
  • The router you use can also mix things up by automatically switching bands which could result putting you on one with a slower speed. 

The best way to get an idea of how your antenna and router are responding to the signal is to test different locations around your property and take some measurements. 

Q: How do I know which is the best mobile service for my area? 

There are a couple of ways you could go about this. If you have a friend or colleague on a different network to you, then you can ask to borrow their smartphone and test out the broadband speed in different locations. 

For accurate results when doing this, try to ensure;

  • You test out all the available networks 
  • Use a smartphone that is as up to date as possible 
  • Use a handset on a Pay Monthly SIM (they are less likely to have data restrictions that a PAYG)

You could also consider calling an expert to carry out these tests for you. Our friendly and knowledgeable engineers can visit your property (home or business) and perform no-obligation tests to ensure that a suitable 4G signal and speed can be achieved at your property, and advise on the best equipment and hardware to attain optimum speeds. We do this with specialist signal analysers that provide printable reports showing the best setup.

Q: What is Carrier Aggregation (LTE Advanced) and does my router need it? 

Carrier Aggregation, or CA, means that the router can boost performance by combining several different radio spectrum bands at once. 

You should find that most of the latest 5G networks and urban 4G deployments support CA. 

Unfortunately it’s possible that some rural areas are not reached and so are not supported. However, it’s wise to buy kit that does support CA to ensure you are covered. You should get support for a good selection of bands and speeds from modern mobile routers.

Some things to look out for;

  • Devices that support the 3GPP release 10 standard (they also support LTE-Advanced).
  • From Release 12 and onwards, CA became much more refined.
  • 5G features tend to start from Release 14 and onwards.
  • LTE Categories – These can help you to identify the theoretical peak downlink and uplink speed of a 4G modem. The higher the category, the higher the download/ upload data handling capacity. Remember though, these are theoretical peaks and even on the best networks with optimum signal, lots of CA and capacity you might still not reach that peak.

Q: How do I know which connector I need for my 4G/5G mobile antenna? 

Wouldn’t it be simple if all mobile routers and antennas came with the same external port type? Unfortunately, they don’t – In fact, some routers don’t even allow external antennas! 

Before buying your kit, make sure that both the router and the antenna are compatible with each other in terms of connectors and sockets. 

Types of connector you are likely to come across are:

  • SMA (most common)
  • TS-9
  • CRC9
  • RP-SMA
  • TNC
  • BNC
  • N-Type
  • MMCX
  • FME
  • U.FL.

Already bought the kit and found that the connectors don’t match up? Don’t panic – You should be able to buy an adaptor cable to convert two different types of connector. 

Q: What is a CELL ID and how can I use it to fix performance issues? 

A CELL_ID is the number your device will show for the mast or tower that it’s getting it’s signal from. So where you might not be able to see what band is being used (some devices and apps won’t show you this information) you can still see what the CELL_ID is and whether it changes. 

If the CELL_ID number changes, this means that the signal is coming from a different source. This could indicate that the band has also changed. Monitoring this information can help you work out any issues with performance. 

Q: I’ve got bad signal with good speed, and bad speed with good signal – What is happening?

Unfortunately, a good signal doesn’t automatically mean good speed. We know, it doesn’t seem fair does it?

The reason this can happen is that you could be receiving an excellent signal, but the band you are connected to is congested with lots of users. 

You could also have great signal, but little capacity to carry data through not enough spectrum frequency. 

It also works the other way – You could have a poor signal but find you’ve got decent speeds. Yes we know it seems bonkers. Mobile signals can be affected by various factors so the best thing to do is to keep on testing until you work it out! Or call in the experts and let us do the hard work for you. 

Q: I can see I’ve got good mobile signal from the antenna, but I’m still having connection problems – Why? 

Remember that your connection is only as good as your router. You could receive a strong, fast signal to your correctly located antenna, but the Wi-Fi (ie. the signal from your router to your device) is poor, resulting in connection problems. 

Your mobile broadband router needs to be able to take the signal from your antenna and transfer it to your device. You can find more tips on how to fix common Wi-Fi problems (like your router location) on our blog. 

How do you know whether it’s the antenna that’s the problem or the Wi-Fi? The easiest way to test where the issue is, is to plug your device into the router through a LAN port. If the signal and connection is still poor, then it’s your antenna. If the signal and connection is strong, then the problem lies with the Wi-Fi. 

Hopefully this blog has helped iron out some of the commonly asked questions when it comes to installing a 4G/5G mobile broadband antenna and some of the issues you might run into. 

If you are still feeling unsure about whether 4G/5G mobile broadband could be the right option for you, or you would like some expert help with choosing and installing the kit, please get in touch with our Wi-Fi experts today! 

by admin
32 Views0

© 2019 GEEKABIT LTD | UK WI-FI CONSULTANT | WI-FI EXPERTS FOR BUSINESS | WI-FI HELP LONDON, CARDIFF, HAMPSHIRE | WI-FI ASSISTANCE HAMPSHIRE