Author: admin

  1. Homepage
  2. admin
Bluetooth Hampshire Home Network Home WI-Fi Router Wi-Fi Wi-Fi Advice Wi-Fi Interference
Is Bluetooth Interfering with my Wi-Fi?

Do you use Bluetooth and Wi-Fi at the same time? Whether you’re at work, home – Or working from home! – you might find that you’re connected to both Wi-Fi and Bluetooth via various devices. 

And if this is the case, it’s probably common for these connections to fight with each other and cause you to run into connectivity issues. Why, we hear you ask? Surely they are completely different from each other? Actually, they’re not. They have a lot more similarities that you might have thought. 

There are instances where Wi-Fi and Bluetooth can use the same radio frequency range for data transfer, meaning that Bluetooth could interfere with your Wi-Fi. 

If you’re experiencing wobbly Wi-Fi or a Bluetooth connection that keeps dropping out then we feel your pain – There is nothing more frustrating. Not only that, but it isn’t very productive, is it? If you’re having to continually reconnect your Bluetooth device to make it work then you could indeed be struggling with interference between that connection and the Wi-Fi. 

Why can Bluetooth interfere with my Wi-Fi?

When it comes to understanding how Bluetooth and Wi-Fi can transmit data and interact with each other, you need to know a bit about frequency bands. 

Telecommunication and other applications depend on a series of electromagnetic frequencies in the Radio Spectrum. Each range of frequencies, or bands, are used for specific purposes. Some of the main frequency bands that you may have heard of are:

  • Marine Band which is used for ships communicating outside of the range of the shore. 
  • Citizen’s Band which is public radio frequency, known as CB and most commonly used by truckers. 
  • Broadcasting Band like AM and FM, multiple bands that are used to broadbcast radio signals 

So which do Bluetooth and Wi-Fi come under? Well, they are on Industrial Scientific Medical bands, or ISM. The home of radio telecommunications. One of these, which you will likely have heard of, is the 2.4GHz frequency band and is commonly used for network connectivity.  

This spectrum is occupied by both Bluetooth and Wi-Fi 2.4GHz, which means that things on this band can get a bit over-crowded and thus cause electromagnetic interference. How do you know when this happens? Well, you might notice some of the following things on your connected devices:

  • Audio connections via Bluetooth cutting in and out
  • Pages that are slow to load, or don’t load at all
  • Your device telling you that there is an issue on your network

A connection as unreliable as this causes nothing but frustration – What you need is for your device to be able to communicate properly with the network. Unfortunately, these problems can be common when a frequency band is over-crowded and causing interference between devices and networks.

This is why we use ISM bands for telecommunication – The traditional radio frequencies were too populated. What you might not know, however, is that ISM bands were originally to transfer heat, not data! Hence why your microwave can cause interference issues with your Wi-Fi and Bluetooth. They use the same technology, but radio waves at a different frequency. That’s why you are always told to not put your router or devices anywhere near your microwave! In fact, any device that gives off electromagnetic frequency could cause interference with your home network and lead to Wi-Fi issues. 

If you’re struggling with slow signal strength, an unreliable signal that cuts in and out, Bluetooth audio problems or a lag between Bluetooth devices (e.g. keyboards or mouse) then you could be experiencing interference issues. 

But is there anything you can do about the interference between Bluetooth and Wi-Fi?

Ways to Reduce Interference Between Bluetooth and Wi-Fi

If you think that your Wi-Fi or Bluetooth problems are down to interference then you’ll be pleased to know that there are a few straightforward things you can do to try and resolve the issues. One simple tweak could make a big difference! 

  1. Try connecting to a Lower Traffic Router Network

    If you have a modern router, then it should have the option to operate on different channels, for example 2.4GHx and 5GHz. If you have this option, then try changing the channel on the router that you’re connected to. This should hopefully help to relieve any network congestion.

    There’s unfortunately not an awful lot you can do if the interference is coming from outside your home, which is more common in densely populated areas like blocks of flats. You can see how dense your area is by looking at how many networks there are in the list when you try to connect.

    Thankfully, as we said above, modern routers are trying to combat this problem by having the option to use a higher frequency band. Dual band routers are particularly useful for this.
  2. Keep up-to-date with software updates

    Modern devices compatible with Bluetooth will mostly have the ability to hop along the channels in the 2.4GHz bands, known as frequency hopping. This helps to alleviate any issues caused by interference. In order for your Bluetooth device to be able to do this, you need to make sure you have stayed up to date with software updates.


On the 2.4Ghz band, some routers can transmit on multiple channels. Couple this with the ability for newer Bluetooth devices to frequency hop and you’re unlikely to struggle with interference between Bluetooth and Wi-Fi. Any interference issues could then be down to physical barriers rather than frequency interference.

  1. Can you remove any physical barriers?

    You may or may not be aware that different materials can affect your signal differently; some will completely block it. If you have lots of glass, concrete, brick or walls in general then this can cause the signal to get weaker, thus affecting your connectivity. Keep this in mind when you place your router somewhere – Behind a concrete wall or in a solid wooden cabinet are not ideal places! You’ll be surprised where our Wi-Fi experts have found routers…

    If you are using the 5GHz frequency band, then you need to be as close to your router as possible, with little physical barriers. Operating on a higher frequency means you are more susceptible to material interference.
  2. Can you get closer to the router?

    If certain materials are weakening your connection and you can’t easily remove that barriers, perhaps you can move either your router so it’s better located, or you and your device so you are closer to the router.
  3. Forget all your networks

    If the above solutions haven’t worked, then you might need to try forgetting all your networks on all your Wi-Fi and Bluetooth devices, unpair everything and then re-connect and re-pair. Yes, it’s a bit of a faff, but it can help remove old connections that are no longer needed that are crowding the network and causing interference problems. 

. 

Still having problems? Call the Experts

If you’ve tried the above ideas and you’re still struggling with an unreliable connection, dodgy audio and/or slow internet then it could be time to call in the experts and get the fault diagnosed. 

Our Wi-Fi experts work out of Hampshire, London and Cardiff and can help solve your Wi-Fi woes and get you a more reliable connection. You can contact us here. You don’t have to put up with rubbish Wi-Fi! 

You can also read more about Wi-Fi interference on our previous blogs.  

by admin
21 Views0
Broadband Hampshire Home Network Home WI-Fi SpeedScore Wi-Fi
Broadband Top of Wish List for House Buyers 

In a recent survey carried out on house buyers, it was revealed that 20% would not buy a property if it had slow internet speeds. 

Likewise, a house having super-fast internet is often a deal-breaker when it comes to house hunting with many prospective buyers viewing the Wi-Fi connection more important than the number of bedrooms. 

Whilst the size of a property is still the most important thing to most house buyers, for many house hunters that is the only thing that the quality and speed of the internet comes second best to. And, according to estate agents in Scotland and the Southwest, some prospective house buyers value the availability of high-quality broadband above everything else. Even house size. 

Nearly a third of estate agents surveyed said their clients were least likely to compromise on high-quality broadband. This feature was deemed more important than local amenities or above space! 

According to Ofcom, by the end of 2021 full-fibre broadband was available to 8.2 million homes (28%). This was 3 million more premises (10 percentage points) than a year ago, and represents the highest year-on-year increase since full fibre started being rolled out in the UK.

Does availability of Wi-Fi affect house prices? 

The rollout of this internet upgrade seems to be affecting the price of property. When comparing exactly the same house but one with a broadband connection of 300 Mbps and one without, the one without broadband would be worth around £5K less. 

Unsurprisingly, COVID also seems to have had an effect on this. Suddenly the UK population was plunged into home-working, with so many more households relying on a strong, reliable Wi-Fi connection for work and home-learning. 

Nearly three quarters of agents surveyed said they saw an increase in questions specifically regarding the quality and speed of the broadband connection when considering a property since the pandemic. 

SpeedScore from Geekabit Wi-Fi Experts

With a decade of providing connectivity solutions to UK markets, Geekabit saw how house buyers, tenants and hospitality customers are getting more tech savvy and starting to ask questions about internet speeds and reliability.

Thus, back in October last year, we launched our innovative Internet Connectivity Measurement Platform – Geekabit SpeedScore. 

This gives you a variety of tools to help provide an independent certification of your internet speeds and connectivity. Ideal if you’re an estate agent trying to prove the speed and connectivity of a property’s internet! 

You can read more about SpeedScore here. 

by admin
21 Views0
Broadband Hampshire Home Network Home Office Home WI-Fi Optimising Home Network Wi-Fi Wireless Network
Average Internet Speeds Double in 4 Years for Home Networks  

Recently released figures show that home broadband has evolved rapidly over the last 4 years. Between 2018 and 2021 home networking speeds increased by 108%, with the number of connected devices within the home also jumping 137% between 2015 and 2021. 

What devices consume the most data per month within the home? 

With the increase in the number of connected devices in our homes increasing so much over the past few years, let’s take a look at which ones consume the most data. 

Whilst at home, the device that consumes the most data is our Smartphones at 96.3 GB per month. Next were Streaming TV’s and Set-top boxes (like Apple TV or Fire) at 78.3 GB and 63.3 GB per month respectively. Games consoles and laptops were also in the top 5, consuming 35.7 GB and 30.3 GB per month. 

Growth of Home Networks

The figures released indicated that there was an increase in traffic as well as the number of connected devices. A span of 35 million homes saw connections of 1.3 billion Wi-Fi devices.

The speed of home broadband has also increased from an average of 152 Mbps to 317 Mbps – That’s an increase of 108% between 2018 and the end of last year. 

IoT devices has more than tripled alongside the doubling of the number of overall connected devices. Between 2015 and 2021, these devices increased by 137%. 

Unsurprisingly, it’s smartphones that consume the most data within our homes, followed by streaming TV’s and set-top boxes.  

Faster, Smarter Home Networks

Everything in the Wi-Fi industry moves fast. Only last week we were talking about Wi-Fi 7, and we’ve barely got our hands on Wi-Fi 6 yet! 

There’s been rapid growth in Smart Home devices, which makes the increase in connected devices unsurprising. Manufacturers are always looking to make their devices faster and smarter in the way that they work. 

Consumers are expecting a home network that serves their need for immediate, secure and reliable connectivity – with the devices to match.  

by admin
19 Views0
Ethernet Cables Wi-Fi Wi-Fi 6 Wi-Fi 7 Wi-Fi Advice Wireless Network
Will Wi-Fi 7 Replace Wired Ethernet?

We all want the best connection possible – Whether that’s wireless or wired. Here at Geekabit, we love all things Wi-Fi, but even we will admit when a wired Ethernet connection could bring more stability and reliability. 

The Wi-Fi cimmunity is all a-buzz with talk about Wi-Fi 7 and the latest improvements it will bring to the wireless world. But will it replace internet via wired Ethernet cables? Theoretically, Wi-Fi 7 should have a top speed that would make it a worthy opponent of LAN’s. But that wouldn’t be the case in all situations. 

Let’s take a closer look. 

What is Wi-Fi 7?

This next generation of wireless technology is well on the way. And with the promise of even higher data rates and lower latency than the current Wi-Fi 6 offering!

Wi-Fi 7 (or 802.11be to be technically correct), in comparison to Wi-Fi 6, will:

  • Use multi-band/ multi-channel aggregation and operation 
  • Deliver higher spectrum and power efficiency
  • Have better interference mitigations
  • Offer higher capacity density 
  • Have higher cost efficiency. 

As a result of the projected ability for it to support up to 30Gbps throughput, this seventh generation of Wi-Fi is also being referred to as Wi-Fi Extremely High Throughput. It will be approximately 3 times faster than Wi-Fi 6.  

How does Wi-Fi 7 work?

The Wi-Fi engineers over at IEEE are proving that there are still ways to enhance and improve Wi-Fi – Even since Wi-Fi 6. As we’ve set out above, Wi-Fi 7 will not only give another boost to Wi-Fi connectivity, but also significant improvements in performance whilst further reducing latency. 

But how? 

Wi-Fi 7 doubles the channel size

With Wi-Fi 7, we see the maximum channel size double, going from 160MHz to 320Mhz. This also means that the throughput is automatically doubled as well.  Not only that, but it’s more flexible too, enabling networks to run with either one channel (at 320Mhz) or two channels (each at 160Mhz). Therefore you can match the network to the requirements of your applications.  

Wi-Fi 7 doubles the number of MU-MIMO spatial streams

The throughout is also doubled via the available MU-MIMO spatial streams which increases from 8 to 16, again doubling what’s available. The connection is shared equally, dividing the bandwidth into separate streams using Multiple-user, multiple-input multiple output (MU-MIMO) technology.  

We tend to see quite a bit of congestion from multiple endpoints attempting to access the wireless network at the same time – But MU-MIMO helps to reduce this congestion. Not only that, but it supports bi-directional functionality. This means that the router and both accet and send data at the same time. Something that was limited to just downlink transmission with Wi-Fi 5! 

Wi-Fi 7 quadruples the QAM

Quadratic Amplitude Modulation (QAM) is increased with Wi-Fi 7 from 1024 to 4096. It is expected that this increase will enable the delivery of an additional 20% in throughput. It’s this that takes us from Wi-Fi 6’s 9.6Mbps to Wi-Fi 7’s 46Mbps. 

Wi-Fi 7 offers Multi-link operation (MLO)

The great thing about MLO is that devices can transmit and receive across all of the available frequency bands (2.4Ghz, 5Ghz and 6Ghz), simultaneously. What does this mean? 

  • It improves performance
  • It reduces latency
  • It boosts reliability
  • In IoT or IIoT environments, specific channels can have pre-assigned data flows based on the requirements of the application or device
  • Networks can be dynamically configured so that they can select the frequency band that has the lowest congestion in real time, sending data over that preferred channel

Wi-Fi 7 offers Multi-AP operation

The functionality available in current and previous Wi-Fi standards meant that each access point acted independently when accepting connection requests from endpoints and moving traffic back and forth to that endpoint. The Multi-AP operation with Wi-Fi 7 uses mesh technology to configure neighbouring AP’s so that they can coordinate with each, thus improving the utilisation of the spectrum and resources. Network engineers can use Multi-AP operation to program a set of APs to form a subsystem and accurately coordinate channel access and transmission schedules.

Time-sensitive networking (TSN) with Wi-Fi 7 

What is TSN? Time-sensitive networking is an IEEE standard to help increase reliability and lower latency. Wi-Fi 7 supports this TSN. It was originally designed to help reduce buffering and latency in Ethernet networks by using time scheduling. This ensures the reliable delivery of packets in real-time applications. 

Multi-RU and WI-Fi 7

Using OFDMA (orthogonal frequency division multiple access), Resource Units are assigned to individual clients to enable access points to communicate simultaneously with multiple clients.  Multi Resouce Units increase the spectrum efficiency, ensuring that traffic avoids any interference on congested channels.

Wi-Fi 7 and deterministic low latency 

Wi-Fi 7 will be able to support real-time applications like AR, VR and IoT due to the combination of the above technologies decreasing latency. In certain situations, for example some industrial automation applications, it’s important that there is not a wide variance in latency. Deterministic low latency with Wi-Fi 7 will be great for this – It means that it will not spike beyond a certain limit. 

What are the benefits of Wi-Fi 7?

You might be thinking that the current Wi-Fi standard is good enough for you and your business connection needs. But the thing is, the wireless traffic load is only going to grow year on year and over time, organisations are going to have no choice but to embrace (and need) digital transformation. So whilst what you have now may well be sufficient, it might not be the case in forever. 

We are all well aware that the business operations that were once done manually are now being done digitally. This also means that the amount of data we use and need to move is growing all the time. 

Digital transformation means that not only has paper turned digital, but processes that were once quite simple are now much more complex, interconnected with others and across multiple applications. 

The improvements and enhancements we will see with Wi-Fi 7 have been designed to accommodate the increased traffic and data we are seeing from digital transformation. 

So – Will Wi-Fi 7 replace Ethernet?

Perhaps the biggest gane changer when it comes to Wi-Fi 7 is that it could in fact replace wired Ethernet in certain circumstances. We’re thinking in offices where everything is all completely wireless, everything unplugged, IT staff could use Wi-Fi 7 instead of having ti run wires and cables through ceilings, walls and office space.  Pretty handy! 

We also talked about the speed of Wi-Fi 7 earlier. Theoretically the maximum speed is 46Gbps. Even in real-world estimates where we’re talking much lower speeds of 6Gbps, Wi-Fi 7 is still faster than Gigabit Ethernet. 

When it comes to comparing Wi-Fi 7 and Ethernet, it’s worth considering bandwidth and endpoints. Wirelessly, the bandwidth is shared among endpoints. With Gigabit Ethernet, each endpoint has dedicated delivery of gigabit circuits. 

Whilst this may sway you back towards Ethernet, don’t forget that wireless networks, particularly ones using Wi-Fi 7, can use multiple antennas and streams. With the meshing of AP’s  with Wi-Fi 7, it might be wise to test the real-world performance to analyse what is necessary for your environment. It can get quite complex, but is definitely necessary when designing and deploying a new network or updating your current malfunctioning one. 

There are tech experts that are expecting Wi-Fi 7 to be a strong contender to replace Ethernet connections for super-high-bandwidth applications. It’s expected that the advances we’ll be seeing with Wi-Fi 7 will make it a very attractive option for a broad range of devices, applications and industries. 

Here at Geekabit, our Wi-Fi experts think it’s a bit early to predict whether or not Wi-Fi 7 will replace Ethernet on a large scale for enterprise LAN connectivity. On paper there may be a chance, but the low-maintenance predictability of Ethernet may make IT teams hold off replacing it for Wi-Fi 7. 

Many IT departments already enjoy the best of both worlds, utilising a pre-existing Ethernet LAN with a wireless network added on top. We don’t see why Wi-Fi 7 and Ethernet can’t co-exist, with Wi-Fi 7 being the primary network and good old, trusty Ethernet in the background quietly waiting as a backup. 

Get in touch with our Wi-Fi Experts

If you are wondering whether you should repace your Ethernet cables with Wi-Fi, or the other way around, then do get in touch with our Wi-Fi experts here at Geekabit. We can help advise what would work best for you and get a network designed and installed for your individual needs. Let’s solve your Wi-Fi woes and get reliable internet into your home office! You can get in touch on 0203 322 2443 (London), 01962 657 390 (Hampshire) or 02920 676712 (Cardiff).

by admin
23 Views0
Cat5 Ethernet cable Cat5e Ethernet Cable Cat6 Ethernet Cable Ethernet Cables Home Office
How Much Does It Cost to Have Ethernet Cables Installed in my Home Office?

Are you a regular remote worker working from the comfort of your own home, relying on your Wi-Fi connection for Zoom meetings and video conferencing? Or do you mostly use your home internet for a Netflix binge to unwind after a long day? 

Either way, having your connection buffer is not what you need – Whether it’s that all-important Zoom call or half way through the last epic episode of Stranger Things. 

You need a fast, reliable connection. If this is something you are struggling with in your home office then installing Ethernet cables could help. 

Our Wi-Fi experts can design a network to suit your home and requirements and implement it, giving you the strongest, most reliable Wi-Fi connection possible for your house. 

Why can home networks struggle with Wi-Fi connections?

Where home networks tend to struggle is when the wireless connection doesn’t reach every part of the house. Not great if your home office happens to be in one of those black spots! Homes that are particularly large tend to struggle the most. 

If your router is downstairs, most commonly next to the telephone or television, then it might struggle to reach your home office if it’s a floor or two up or out in the garden. The noise of family life might not reach you – But neither will your internet connection! That distance could be slowing you down. 

It’s not just larger homes that struggle. Even some smaller houses can get Wi-Fi blackspots, particularly if they use modern foil insulation. 

What can you do about slow internet at home?

The frustratingly slow internet connections you get from Wi-Fi black spots at home can fortunately be combated with Ethernet cables. 

All we hear about when it comes to Wi-Fi is wireless, wireless, wireless. Everything nowadays seems to be wireless! But in situations where you need to stream lots of videos, transfer data or utilise video conferencing, there could be a better way.

Hang on a minute, what is this blasphemy against wireless? Well, Ethernet cables. If your Wi-Fi is struggling to reach your home office, and you’re relying on it for video calls and data transfers then Ethernet cables are going to be your friend. 

If you’re wondering whether or not you should opt for Ethernet cables over wireless then you might find this previous blog of ours a helpful read.   

With the current heatwave we’re experiencing in Hampshire, London and all across the South East of England currently then we wouldn’t blame you for trying to soak up some sunshine whilst working! If you are wanting a reliable internet connection in your outdoor home office or out in the garden for working from home, then running an Ethernet cable would be our first suggestion. 

There are different types of Ethernet cables – Cat5, Cat5e, Cat6 and Cat7. You can read more about the types of Ethernet cables in our previous blog here as well as a comparison between Cat6 and Cat 7 here. The main things to know are:

  • Cat5: A bit older and slower
  • Cat5e: Faster and with less interference
  • Cat6: Even faster, but not always completely necessary
  • Cat7: Faster again with higher frequency and bandwidth

The blogs linked above go into more detail and how to choose the best one for your needs. Or you could just leave it to the Wi-Fi experts, couldn’t you?

How much will it cost to install Ethernet cables in my home office?

Every home is different, so the requirements to ensure a strong internet connection will vary slightly house to house. 

When it comes to a home network there are various things to consider that will affect the network design and total cost:

  • Whether the network is wireless or wired
  • Cable installation
  • Access to the internet
  • Configuration
  • Hardware installation
  • Software installation 

Once all of this is installed and configured, you should find that your connection is faster and more reliable – No more buffering mid Zoom conversation!

Price wise you are likely looking at between approximately £200 and £500. The lower end of the price range would be for installing an extra Ethernet port in an internal home office, with the higher price point for cabling from the home to an outside home office. 

Of course, as we said above, the price will depend on individual requirements as well as the size of your home and easy it would be to wire. 

At the end of the day, installing Ethernet cables for your home office will likely improve how reliable your internet connection is. And if slow internet is causing you daily frustration then resolving the issue with the cost of installing Ethernet cables will be so worth it, won’t it?

Get in touch with our Wi-Fi Experts

If you are wondering whether Ethernet cables could help solve your Wi-Fi woes and get reliable internet into your home office then do get in touch with our Wi-Fi experts here at Geekabit. We can help advise what would work best for you and get a network designed and installed for your individual needs. You get in touch on 0203 322 2443 (London), 01962 657 390 (Hampshire) or 02920 676712 (Cardiff).

by admin
21 Views0
Router Uncategorised Wi-Fi Wi-Fi 7 Wireless Network
Wi-Fi 7 – World’s First Router Released

It feels like we’ve only recently been talking about Wi-Fi 6 being new on the internet scene, when up pops Wi-Fi 7! But actually, you might not know that the Wi-Fi 7 chipset infrastructure has actually already been available for a few months. 

Not only that, but last month we also saw the release of the world’s first Wi-Fi 7 router. Powered by Qualcomm, this router is the H3C Magic BE18000 Tri-band Wi-Fi 7 router. 

There’s not a great deal of information available yet as it’s so new, but look out for more from the China-based network technology vendor H3C for more announcements. 

This new Wi-Fi 7 router can purportedly deliver 18.443 Gbps peak data rate (which explains the BE 18000 in the name..) on 3 bands. 

What features will this new Wi-Fi 7 router support?

Due to it being powered by Qualcomm’s Networking Pro 1220 platform, the H3C Wi-Fi 7 router can support all the Wi-Fi 7 features you would expect it to, including:

  • 320 MHz channels
  • 4kQAM modulation
  • MLO

As the unit is tri-band, it is configured for 4×4 MU-MIMO on each of the 2.4 GHz, 5 GHz, and 6 GHz bands.

When will we see Wi-Fi 7 devices available on the market?

During May, Qualcomm as well as another 2 major chipset vendors introduced their offering of Wi-Fi 7 chipsets for both the device side and network side. 

As the prevalence of Wi-Fi 7 platforms increases, we’re likely to then start seeing Wi-Fi 7 devices appear on the market. We could be seeing Wi-Fi 7 enabled phones and laptops as early as the end of this year or early next year! 

We wouldn’t be surprised if the most influential technology event in the world, CES, will see the launch of the first Wi-Fi 7 device in 2023. 

Is Wi-Fi 7 certified by the Wi-Fi Alliance?

Before we get too carried away with all things Wi-Fi 7, it’s important to note that there is not currently any Wi-Fi 7 certification from the Wi-Fi Alliance. This means that even though the H3C Wi-Fi 7 router has been revealed, it cannot yet be certified as Wi-Fi 7. 

So technically, it’s more accurate for us to say that the H3C Wi-Fi 7 router has been designed in line with the standard IEEE 802.11be. 

But being the Wi-Fi geeks that we are – We are still pretty excited at the prospect of Wi-Fi 7 and a router that likely meets the upcoming features and specifications. 

Watch this space! 

Image from https://www.h3c.com/en/Products_Technology/Enterprise_Products/IntelligentTerminalProducts/Magic/BE18000/

by admin
22 Views0
4G 4G LTE Mobile Signal Strength
How Can I Accurately Check My Mobile Signal Strength? 

Did you know that there is much more to mobile signal strength than just the signal bar display? The real test for measuring your mobile signal strength accurately is the Field Test Mode. The results from this test can help you determine whether you might need a mobile signal booster. 

There are many factors that can affect your mobile signal strength, for example, whether you are inside or outside a building, how far you are from the cell tower etc. So let’s look at the Field Test Mode and how to use it. 

Signal Strength: How To Choose a Mobile Signal Booster

You can’t choose a mobile signal booster for your home or business if you don’t know how strong the outside signal is. And we don’t just mean ‘how many bars you’ve got.’ Yes, that gives some indication of how strong the signal is, but there is a more accurate way to measure mobile signal strength. 

Did you know that different phones have different numbers of bars? Some have 5, some have 4, some even have 8! Not only this, but even when phones have the same number of bars for signal strength, there isn’t actually any standardisation for them. Having 4 bars of signal on one phone can mean something different to having 4 bars on another phone. 

It’s pretty clear that measuring mobile signal strength purely by the number of bars isn’t very specific.

When experts measure mobile signal strength, they measure it in decibels. They are very precise and are much more informative and accurate for doing a mobile signal strength test. Testing in this way means you can find out just how strong the signal is that you are receiving. 

What Is Field Test Mode? 

You may not realise that the majority of phones have Field Test Mode – A built-in setting that can show you very useful information about your phone. This includes the signal strength, measured in decibels. 

We can imagine that you’ve already tried to find this on your phone right this second to check it out! We don’t blame you. But let’s just go through a couple of things to consider before you start taking mobile signal strength readings.

  • Carrier – Remember that the signal strength readings you take are only true for the mobile carrier of said phone. To compare the signal strength to other carriers, you would need phones on those carriers. Basically, even if you get 4 different service providers, you can only test the signal strength of the carrier of your phone when in Field Test Mode. 
  • Network – You need to know if the signal you are measuring is from an LTE network or not in order to interpret the results. LTE readings can be read differently from previous generation networks (like 2G, 3G and 4G0. 

How do you use Field Test Mode on an iPhone?

If you have an iPhone, you’ll find that it has a hidden built-in Field Test Mode app. Follow these steps to access it:

  1. Go to Settings > Wi-Fi and turn Wi-Fi Off.
    You will need the Wi-Fi to be turned off in order to be able to see the network you are connected to (e.g. 3G). 
  2. For iOS 9.3 and above: Go into Settings > Cellular > Cellular Data Options > Enable LTE and turn LTE to Off.
    For iOS 9.2 and below: Go into Settings > Cellular > Enable LTE and turn LTE to Off.
    As we said above, LTE readings can be very different from previous networks. In order to be able to best interpret the results, it’s ideal to get your signal readings from a previous generation network.
    If you like, you could then repeat the site survey with LTE enabled, which would give you readings for different generation networks. 
  3. To launch the Field Test Mode app, go to your Phone Keypad, dial *3001#12345#* and press the Call button. You’ll notice that where before you had signal bars, you now have a negative number. This negative number is the decibel signal strength reading. You should also see the carrier name and the type of network.  
  4. Tap on LTE
  5. Tap on “Serving Cell Meas”
  6. Look for “rsrp0” and the number corresponding will be the numerical measurement of the iPhone cellular signal strength in dBm

To start taking signal strength readings, you need to move to the location where you want to take the reading and then wait for between 30 and 60 seconds for the signal strength readings to catch up. You can record the signal strength, network type and carrier. 

Once you’ve finished taking readings, you can return to your normal iPhone settings by pressing the home button. Don’t forget to go back in and enable Wi-Fi and Cellular LTE! 

How do you use Field Test Mode on an Android?

To access Field Test Mode on an Android follow these simple steps:

  • Go to Settings > “About Phone”
  • Depending on the model of your phone, look for ‘Network’ or ‘Status’ to see your numerical signal strength in decibel 
  • You can usually see Network Type near the signal strength option. 

If you’re after a bit more information, there are apps you can download from Google Pay that will give you the signal strength in decibels as well as other info. To see the available apps search for ‘cell signal’ in the App Store. DOwnload whichever one is compatible with your phone, tablet or device. 

Just like with an iPhone, get ready to take signal readings by moving to the location you want to know the signal strength for. Stop and wait for between 30 and 60 seconds to let the signal readings catch up with you and then you can record them along with the network type (2G, 3G, 4G, LTE etc). 

Keep doing this until you have recorded the signal strength for all the locations in your home or business. 

What would I use mobile signal strength information for? 

Knowing the mobile signal strength for your living or working space enables you to see where you might need to boost the signal. Using Field Test Mode can enable you to perform a site survey, which gives you a floor plan analysis of your home or business.

The purchase of mobile signal boosters (also known as network repeaters, signal amplifiers, signal repeaters etc) should be based on the results of a site survey. 

Carrying out a site survey involves taking several accurate signal strength readings from in and around your home or office building. These readings can help you to calculate whether a signal booster will help and what devices you will need. 

Field Test Mode is ideal for carrying out a site survey. Basing it on signal bars is not reliable compared to the precise numerical value of decibel you get from this tool. Carrying out a site survey using Field Test Mode is very straightforward (as you will have seen from the steps above) and helps you to measure the mobile signal strength of your home or business using just your phone. 

What do the Decibel numbers mean? 

If you are connected to a non-LTE network (2G, 3G, 4G H+), the value you get is the Received SIgnal Strength Indicator (RSSI). This is a method of measuring wireless signals. 

LTE networks however, are usually measured in Reference SIgnal Received Power (RSRP) which is why LTE readings can be very different to the readings for previous generations like above. 

You’ll find that Decibel signal strengths are usually double or triple digits and are marked as a negative number. Your phone might not show the negative sign though. The stronger the signal, the closer the number is to zero, so -89 is a stronger signal that -99. 

The unit of measurement in all this is decibel (dB) – This measures the power of the mobile signal. This value is telling you how strong your phone is receiving the signal from your provider’s mobile network. 

Did you know that the Decibel scale is not linear? If the signal strength increases by 3dB, then it is twice as strong. Signal strength that increases by 10 dB is an increase of ten times the signal strength. So, in real terms, an RSSI value of -50 is actually ten times stronger than an RSSI measurement of -60. 

Why is Field Test Mode so Important?

If you are planning to install a mobile phone signal booster, then it’s absolutely vital that you have an accurate reading of your Received Signal Strength across your business or home. Field Test Mode can help you do just this and inform your site survey ready to help you make the right booster purchase. 

Field Test Mode enables you to see exactly how strong your mobile signal strength is – Both inside and outside your building. 

Field Test Mode is an essential tool when it comes to assessing how a mobile signal booster can improve your reception.

Call the Experts

If all this has got your head in a bit of a spin, then why not let the experts do it for you? Our Wi-Fi Experts are trained professionals in all things wireless. We can provide you with a site survey to help assess your mobile signal strength. Give us a call today! 

by admin
20 Views0
4G 4G LTE 4G Mobile Broadband 4G survey 4G Wi-Fi Antenna Antennas
4G LTE Antenna – What Do I Need to Consider? 

If you are using a 4G LTE broadband connection, or plan to, then you’ll need to be considering your external antenna. 

 

4G broadband is a fantastic option if you struggle with a standard broadband connection, especially if you live or work in a more rural area. Over the past few years we’ve seen a big uptake in 4G and mobile broadband options – For homeowners as well as businesses. 

 

What you don’t want is to switch to mobile broadband, and then end up with download speeds that are lower that what you were expecting. Whilst this may simply be down to poor reception, there are some other factors that can come into play. 

 

So, with you as the user, what considerations do you need to make to ensure your 4G mobile broadband connection will be the strongest it can be?

 

Did you know that LTE is MiMo technology?

LTE, like 11n Wi-Fi, is a multi-stream radio, multiple in/multiple out (MiMo) service. So similarly to 11n Wi-Fi, LTE uses multiple radio data streams to and from the end client – Which means the more streams of data the client can take, the faster the broadband. 

Just like in 11n Wi-Fi, the number of streams is T (the number of transmit radio streams) multiplied by R (the number of receive streams the connection can support) so TxR. This means that if something supports 2×2 streams, it can support twice the upload and download speed of a device with 1×1. In 4G LTE, you get anything from 1×1 to 8×8 stream capability (including all the possible mixes in between them). 

The number of transmit and receive streams dictates how many antennas the client needs. So for a 1×1 service, you would only need a single antenna. For a 2×2 service you would need 2 antenna. You get the idea. 

A connection can only support the number of streams the service provider is capable of via their masts. It is also dependent on the client device and its radio capabilities. 

The majority of devices – Like phones and routers – have dual stream capabilities. 

 

Choices of Antenna

If you’ve already been looking for a 4G LTE antenna then you’ll likely already have realised that there can be a difference in price. One of the main differences between antennas will be, as we said above, the number of connections they have. 

 

As you’ll have probably guessed, the more connections they have, the picier the get. So a 2×2 (or 2×1 or 2×2) device will cost more than a 1×1 device. You’ll typically see a choice between single (1×1) and dual connection (2×2) antennas. 

 

In most scenarios, you will be wanting a dual connection (2×2) antenna so that it supports the functionality of your router and other devices with dual stream, MiMo functionality.

 

But how do you know if the antenna will be any good? 

 

That comes down to polarisation. There needs to be a physical difference between the radio streams so that the receiver can differentiate between them. This can be as simple as mounting the antennas, leaving a physical gap between them of a few inches. 

 

It’s also a good idea to have each antenna at a different angle – Ideally at 90 degrees to each other. This is because although the radio waves might leave the mast in a lovely vertically polarised fashion, after a few reflections they will likely not be like that any more. Setting up the antenna so that they can also receive radio waves that are no longer vertically polarised will mean you will better receive the signal – A cross shape would achieve this. 

 

Do I need a Directional or Omni-Directional Antenna Set Up? 

Whilst it might be tempting to just opt for the highest gain directional antenna, this isn’t actually always the best choice – For 4G LTE or Wi-Fi. 

 

If you imagine a radio wave travelling from the mast to your receiver, with nothing in the way, it would have a straightforward route and an uninterrupted signal. In real life, this is unfortunately not the case. The signal cannot go through anything solid, so whenever something gets in its way, it reflects and scatters from those objects until it reaches the antenna. This means that the radio signal could come to your receiver from all different directions. 

 

Directional antenna, although high gain, have limited coverage in terms of their angle. So with radio waves potentially coming in in all directions, the directional antenna is going to cause you problems. 

 

The best situation for a directional antenna is when there is a clear line of sight between the mast and the mount of the antenna – Which is not a very common thing. 

 

The omni-directional antenna might well be lower gain, but it should pick up the signal regardless of what directional the radio waves are coming from. 

 

The best way to improve the signal you receive is to mount the antenna outside and as high up as possible.

 

Directional Antenna Pros

  • Can occasionally give a better, stronger and cleaner signal when carefully aligned with line of sight 
  • With a clear line of sight (and no ambiguity) then a directional antenna would be preferred choice

Directional Antenna Cons

  • Careful alignment with line of sight can be very tricky
  • Without line of sight, you have to rely on how it reflects and scatters
  • Changes in environment can result in how the signal is reflected (e.g. something as simple as a dry wall reflects better than a wet wall)
  • It is harder for the system to switch to a different mast (this could be dictated by the provider)

 

Omni-Directional Antenna Pros

  • Easy and quick installation (no tricky, careful alignment needed)
  • It is easy for the system to change transmitter masts
  • Antenna can be mounted outdoors, making a significant improvement in signal despite the lower fain

 

Omni-Directional Antenna Cons

  • In comparison to the directional antenna, the omni has lower gain
  • Can be more susceptible to radio frequency interference coming from different directions

 

Frequency Bands

There are a number of frequency bands that are used for 4G LTE in the UK. There’s the 800MHz band, the 1400MHz / 1.4GHz band, the 1800MHz / 1.8GHz band, the 2100MHz / 2.6GHz band, the 2300MHz / 2.3GHz band, and the 2600MHz / 2.6GHz band.

 

Although not set in stone, you generally find that the lower frequency bands are used more in rural areas due to them having longer transmission range than the higher frequencies and having to cover a larger geographical area. The higher band would likely be used more in built up towns and cities. 

 

What does this mean for antenna? Well, it means that you, as the end user, need to ensure that your antenna will support the service and frequency band of your provider. If you are sensible and savvy, you will choose an antenna that can cover the different frequency bands in case your service/provider changes. 

 

Stream Bandwidth

The available spectrum is divided and allocated between providers into sub-bands. The connection you get as the end client will depend (and vary) on how many clients the local signal mast can support as well as the bandwidth. 

 

If you live or work in a high user area, the density will mean that you may struggle with throughput speed or even getting a connection in the first place! 

 

What high user density situations could impact your 4G connection? Well, if you live near a football stadium or a busy motorway, you may find that on match day or during a bad traffic jam, your internet connection comes to a standstill as well! 

 

Which Antenna Do I Need for my 4G LTE Connection? 

 

How do you choose? Let’s take a look again at the main considerations you need to think about to ensure the best possible connection. 

 

Single or Dual Antenna

 

Does your router only have a single antenna connector? If so, then you should probably choose an external antenna with a single connector. 

 

If your router has a dual stream connection then you need to choose an antenna with 2 connectors. You could also choose two single connection antennas. 

 

Remember – If the local signal mast sends out a 1×1 service, then that’s all you’re going to get, even if you have a router and antenna set up that supports 2×2. Having the 2×2 compatible service won’t see you any difference if it’s a 1×1 signal service.  

 

Directional or Omni-Directional Antenna? 

We’re not trying to tell you what to do… But our Wi-Fi expert’s advice would be, in most scenarios, to go for an omni-directional antenna. As we mentioned above, it’s tempted to just go straight for the antenna with the biggest gain, usually the directional, when you could face very tricky alignment issues. Very few properties, business or home, have a clear line of sight between their local mast and their antenna. Unless you have this clear line of sight, then an omni is the best option.  

Correct frequency

Remember to ensure that your choice of antenna will work with the frequency range coming from your service provider and local mast. It’s only going to work if your frequency band matches what your antenna supports! 

 

To avoid potential issues when services or providers change, you should aim to choose an antenna that covers all the 4G LTE bands here in the UK. That means that your antenna should always work, even if you change provider or your local service changes. You might have to pay a little more, but it could save you problems in the future. 

 

Location

You should always mount the antenna wherever it has the best line of sight to the local mast. Sometimes you might not be able to see the signal mast, especially if you live or work in a very built up area. Even if you cannot see the mast, bear in mind the direction it’s in – Does your antenna need to be at the front or the back of your building? Even without a clear line of sight, this will vastly improve the signal you get. 

 

Generally speaking, the higher up you can mount the antenna the better! 

 

Also make sure that you’re not locating it close to a thick wall or anything metal. Even an omni-directional antenna would struggle to get a good signal in these situations! You want to make it as easy as possible for the signal to reach the receiver on your antenna. 

 

I’ve followed the advice but still don’t have good download speeds? 

You could have the perfect signal – And still not get good download speeds. This could be down to a few different reasons:

  • The service capabilities of your provider (the frequency they are allocated)
  • The service provided from the local mast
  • The capabilities of your router
  • If you live or work in a high user density area with lots of people trying to connect at the same time

 

Whether or not this matters depends on what you are using your connection for. If you are a business and are relying on your 4G LTE connection for your business operations, then this is going to be an issue. 

 

Trust the Experts

 

Here at Geekabit, our Wi-Fi experts can tell you just how reliable a 4G (or 5G) mobile broadband connection would be with one of our surveys. 

 

If you’re struggling with wired broadband, and not getting the reliable internet connection you need in your rural business or home, then 4G / 5G could be a fantastic option for you.

 

It can feel like a big jump to give up on your wired broadband connection and opt for 4G – Which is where our Cell Coverage 4G survey comes in.

 

We can tell you exactly whether 4G broadband would work for you, and which network would be most reliable.

 

by admin
22 Views0
4G 4G LTE 4G Wi-Fi 5G PCI Planning PCI Planning for 4G / 5G
PCI: What Is The Difference Between 4G LTE and 5G NR

In this blog we are going to look at the difference between 4G LTE and 5G-NR, specifically in terms of PCI. 

 

What is PCI when it comes to 4G / 5G?

 

PCI is the Physical Cell ID and is one of the most important ways a cell identifies itself in a 4G or 5G wireless network.

The physical layer (or PHY-layer) Cell ID is what determines the Cell ID Group and Cell ID Sector, and it is this that is needed for DL synchronisation. 

DL (Downlink) Synchronisation is the process in which a UE (phone) detects the radio boundary and OFDM symbol boundary. In other words, the exact timing of when a radio frame or OFDM starts. (In telecommunications, orthogonal frequency-division multiplexing (OFDM) is a type of digital transmission and a method of encoding digital data on multiple carrier frequencies.) 

This DL synchronisation process is done by detecting and analysing the SS Block. From a UE’s (phone’s) point of view, Downlink is the ‘receiving’ transmitting direction. The SS Block (SSB) stands for Synchronisation Signal Block and refers to the synchronisation signal and Physical Broadcast Channel (PBCH) as a single block that always moves together.

 

Why is PCI Planning important? 

 

If you are planning, designing and deploying a 4G / 5G network, then PCI Planning will be one of your most important steps. 

Making sure your network is properly designed with PCI in mind will ensure your network works efficiently and increases how your resources are utilised. 

Excellent PCI planning ensures QoS for those who are subscribed to your 4G / 5G network.

QoS (Quality of Service) is the use of technologies to control traffic on your network, ensuring that the performance of critical applications meets requirements.

The key goal here is to use QoS and PCI Planning to enable your network to prioritise traffic, offering dedicated bandwidth and lower latency.

PCI is one of the technologies used to enhance performance of business applications, WANs and service provider networks. 

Poor planning in this area can result in PCI collisions and conflicts – Which in turn, negatively impact the overall performance of your network.

 

How is the PCI value created?

 

The PCI value is created from two components – PSS (Primary Synchronisation Signal) and SSS (Secondary Synchronisation Signal). 

The PSS is used to obtain the slot, ub-frame and half-frame boundary as well as providing the cell identity within the cell identity group. 

The SSS is used to obtain the radio frame boundary (10ms) as well as enabling the UE (phone) to determine the cell identity group.

After your UE (phone) has successfully decoded the PSS and SSS, it will be able to calculate the PCI. It uses the following formula:

PCI = (3 × SSS) + PSS

 

How is PCI calculated for 4G?

 

PSS has 3 values (0,1 and 2) and is created using the Zad-off Chu sequence.The PSS helps to accomplish slot and symbol synchronisation in the time domain.

SSS has 168 values (0 to 167) and is produced using concatenation (linking together in a series) of 2 m-sequences (max length sequence). The SSS helps to achieve radio frame synchronisation.

The formula to work out PCI for 4G is therefore:

PCI = (3 * 167) + 2 = 503

This means that there are PCI values varying from 0 to 503 LTE, which in turn supports 504 unique PCIs for 4G. 

 

How is PCI calculated for 5G?

 

PSS has 3 values (0,1 and 2) and created using m-sequence. 

SSS has 336 values (0 to 335) and is generated using the product of 2 m-sequences.

In 5G-NR (a new radio access technology developed by 3GPP for the 5G (fifth generation) mobile network), the basic structure of PSS is the same but the number of SSS is increased.

The formula to work out PCI for 4G is therefore:

PCI = (3 * 335) + 2 = 1007

So the PCI values will vary from 0 to 1007. This means that 5G-NR can support 1008 unique PCIs.

 

What does this difference in PCI between 4G and 5G actually mean? 

 

In the simplest terms, 5G-NR has double the number of PCI’s, compared to LTE 4G. 

5G has more Physical Cell IDs (the actual area that the cell antenna on a cell site is covering). Each 5G NR cell has a Physical Cel lD. 5G has 1008 unique possible Physical Cell ID’s, whereas 4G has only 504. 

So if we’re connected to Vodafone on Physical Cell ID No.1, but we could also see Vodafone signals being broadcast out of that cell tower on different cell antennas using Physical Cell ID No,2 and No3, then our mobile device would know to connect to No1. It would get confused if it connected to No.2 or No.3 and impact the quality of service.

The user device connects to the one physically nearest. So for example, a Vodafone tower has two cell antennas out the top broadcasting the Vodafone signal across an area, which will overlap to a small degree. A user’s device will always want to make sure it is connecting to the same one. You don’t want to connect to one antenna and back to another – It’s this that ruins the quality of service. So you will always try and connect back to the one you were talking to, which is normally geographically the one closest to you. 

The Physical Cell ID is used to identify each space. We don’t want those numbers to overlap too often, or our devices get confused and don’t know which to connect to. If a device can see a Physical Cell ID of 2, and there’s another cell antenna using an ID of 2, it wouldn’t know which one to communicate with.

It is beneficial to know that 5G-NR has more PCI’s available in the planning stages, to enable a higher quality of service (QoS) for end user devices.



by admin
28 Views0
4G 4G LTE 4G Mobile Broadband 4G survey 4G Wi-Fi 5G 5G survey Broadband Business Wi-Fi FTTP Hampshire Router Village Hall Wi-Fi Wi-Fi
Wi-Fi and Connectivity Options for Village Halls

Did you know that village halls in need of a bit of updating and renovation can apply for a share of a £3m fund, all in honour of the Queen’s Platinum Jubilee?

 

This follows the tradition of village hall investments for Queen Victoria’s Diamond Jubilee in 1897 and King George V’s Silver Jubilee in 1935. 

 

125 lucky village hall recipients will have a share of the £3m fund, which can be put towards renovations and building improvements including Wi-Fi.  

 

You might well be hosting or celebrating in your local village hall for this weekend’s Jubilee celebrations! Village halls are often the heart of communities, bringing people together. It’s vital these hubs stay well connected with strong, reliable Wi-Fi. 

Wi-Fi for Village Halls – A Quick Guide

If you’re a part of the committee that looks after your local village hall, then you’ll know that there is an ever-increasing need for these community buildings to offer broadband and Wi-Fi access to their users. 

 

Not only will this support a wide range of community activities and events, it will also enhance the facilities you can offer as a venue to those who hire your space. 

 

So what do you need to consider to improve digital connectivity for your communities and businesses by making sure your village hall is well connected? 

 

Get a Broadband Connection


Before even thinking about Wi-Fi or broadband, you need to make sure you have a telephone landline. The only exception is if you are able to get cable or fibre access to the hall. You can read more about FTTP in one of our previous blogs here. Make sure that you have a business contract rather than residential, as it will be for public use. 

 

To get a new telephone line, order one through BT.com. After that’s done, you can upgrade to broadband. Always make sure you check with the ISP that you are able to make your internet connection available to the public before placing your order. 

 

If you want to get broadband without a landline, you would need to be able to have a cable, full fibre or mobile broadband connection. More on that later! 

 

Not got an official postal address? Some village halls don’t actually have an official post office address which can cause problems with some ISP’s as they may insist that you have one in order to place an order. If you find this is the case, you can contact the Post Office and request an official address here.

 

Some ISP’s will accept what’s known as an ‘unserved’ building but they may ask to do an initial survey before they confirm your order.  

 

How much will it cost to install Wi-Fi in a village hall?

You will need to incur some costs to get Wi-Fi successfully set up in your village hall. Bear in mind the following likely outgoings:

  • Installation and connection costs for a new telephone line (plus VAT) and broadband connection (if required)
  • Line rental for the telephone line (ongoing costs)
  • Data usage charges from broadband / Wi-Fi use (ongoing costs)
  • Any work required to install the Wi-Fi router in a secure location, plus additional devices that may be needed to boost Wi-Fi signal 

 

You can help keep costs to a minimum by shopping around for the best contract available on price comparison websites. Remember you need a business contract, not a residential one! Make sure you balance out the costs with data usage limits and of course, reliability.

 

Remember though, making improvements with the Wi-Fi in your village hall is investing in its successful future. It’s vital that these community hubs are well connected for their users. And even better if you can get the costs covered by securing part of the £3m Jubilee fund!

 

Security

 

We cannot express enough how important it is to make sure that your Wi-Fi is secure. You should manage and filter the access to your Wi-Fi signal. 

 

If you were to allow unmanaged access to your Wi-Fi, people may use your broadband connection for illegal purposes. By providing the Wi-Fi for this, you could be liable. 

 

Luckily for you, it’s super easy to manage your Wi-Fi security – And definitely not something that should put you off setting up a Wi-Fi connection in your village hall. 

 

To minimise the risk of inappropriate use, you should:

 

  • Install your router in a secure place where only authorised users are able to physically access it. Don’t let people connect to your router via Ethernet cable as they could make changes.
  • Routers usually display the passwords you need in order to manage and access your Wi-Fi connection. If you think it’s possible for unauthorised users to access this information, then consider changing the User ID and admin password (instructions on how to do this should be in your router user guide).
  • Regularly change your Wi-Fi access password for users. This means that only current users will be able to use your Wi-Fi connection, rather than someone who isn’t authorised or is re-using a password they’ve previously been issued with.
  • Always ensure that the parental control setting is switched on. This prevents access to any unsuitable websites on your Wi-Fi connection. You can use your router manual to set appropriate firewall settings to set the level of restriction required. 

 

 

The router in our village hall doesn’t reach the whole building

 

If you already have a router installed in your village hall, but it’s not reaching far enough and you’re struggling with black spots or slower Wi-Fi in certain places then you may need to extend your Wi-Fi coverage. 

 

This is particularly relevant if you have a large village hall building – The signal just may not be strong enough to reach everywhere it needs to from one router. 

 

We mentioned above that it’s important for the router to be in a secure area so unauthorised people cannot access it. This could mean that it’s been placed in a less than ideal location for signal strength and connectivity. It’s vital to balance the two! 

 

Ideally, you will be able to place the router in a central location, but if that is not the case then you may need to install other devices to extend the signal to other locations within your village hall building. You could potentially use a powerline adapter or a Wi-Fi extender to boost the signal strength and get wider Wi-Fi coverage in the building. 

 

Mobile Broadband for Rural Village Halls

You and your users might not be in London, but that doesn’t mean that you don’t expect the same Wi-Fi connection that you get in urban areas – Despite being in more rural ones. 

 

Unfortunately there are many parts of the countryside that are suffering from a broadband deficit – Indeed, there seems to be a connectivity imbalance across the countryside, with many village halls struggling.

Over the past year particularly, we’ve installed countless numbers of external 4G antennas and routers in rural areas, effectively replacing the broadband through the telephone cable using a data SIM card.

 

You can read more about our 4G Mobile Broadband solutions in a previous blog of ours here. 

 

If you are wary about whether Mobile Broadband could work in your more rural village hall, then our Cellular Survey could be just what you need. We can map the availability of cellular and data coverage within a building and report the details of phone coverage for 2G, 3G, 4G/LTE and 5G. We can measure the cellular connectivity, data upload and download speeds and the occurrence of dropped and failed calls for all the main mobile network operators. You can read more about this here. 

 

Want to know more about how Geekabit could help get your village hall connected?

For further information about securing a strong Wi-Fi connection in your village hall, please email our Wi-Fi experts at [email protected] and someone will be in touch as soon as possible.

 

We work out of London, Hampshire and Cardiff, covering community buildings, businesses and larger residential properties. 

 

by admin
37 Views0

© 2019 GEEKABIT LTD | UK WI-FI CONSULTANT | WI-FI EXPERTS FOR BUSINESS | WI-FI HELP LONDON, CARDIFF, HAMPSHIRE | WI-FI ASSISTANCE HAMPSHIRE