What is 6GHz Wi-Fi?

Did you know that following the historic decision by USA’s FCC in April 2020 to release 1200 MHz of bandwidth in 6 GHz space for unlicensed use, UK regulators cleared unlicensed wireless usage in the 6 GHz spectrum to give 6GHz WiFi a huge boost back in July 2020. 

 

This regulatory go-ahead enables your router to broadcast over the 2.4GHz and 5GHz bands. What does this mean in real life terms? Simply, it means there are now a lot more open airwaves that routers can use to broadcast Wi-Fi signals. This in turn means faster, more reliable connections from the next generation of devices.

 

This is the biggest spectrum addition in over 30 years – In fact, since the FCC cleared the way for Wi-Fi back in 1989. Pretty huge right? It means the space available for routers and other devices have quadruple the amount in this new spectrum. This means a lot more bandwidth for the user and less interference for their devices. 

 

For the past 20 years we’ve had the Wi-Fi Alliance that oversees the implementation of Wi-Fi. This change in the spectrum is the most ‘monumental decision’ during their existence. You’ll be seeing this implementation as Wi-Fi 6E, with more and more enabled devices becoming available. 

 

Will Wi-Fi 6E fix my bad Wi-Fi? 

 

There’s a good chance that spectrum congestion has interfered with your ability to connect to your Wi-Fi network in the past. When there are a lot of devices all trying to connect over the same band of frequencies, some devices will drop out. Have a look at your local area for Wi-Fi networks – If there is a long list, that could be why you’re struggling with a slow connection and less than favourable reliability. This is because there are too many competing signals, which stops your device getting through. It’s hoped that gains in 6GHz performance will last, even when they are more widely used than they are now. 

 

Not only does Wi-Fi 6E offer new airwaves for routers to use, they are also more spacious airwaves that have less overlapping signals which can cause problems on some other Wi-Fi channels. 

 

The new spectrum doesn’t use any of the previous spectrum, yet offers space for up to 7 maximum-capacity Wi-Fi streams which can all be broadcast simultaneously without causing interference with each other. 

 

Here’s the geeky bit… The UK telecoms regulator, Ofcom, made it possible for home Wi-Fi networks to harness 500MHz of radio spectrum frequency in the new 6GHz band, which will significantly boost the speed of licence-exempt indoor home wireless networks via Wi-Fi 6/6E. 

 

What is 6GHz? 

 

Basically, Wi-Fi works by broadcasting over airwaves that are open for anyone to use. Previously, this was over two bands: 2.4GHz and 5GHz. This third band, 6GHz, is quadrupling the available space for traditional Wi-Fi. 

 

What do the numbers mean? 2.4GHz can travel further, but 6GHz travels faster. The main thing however is that the number of airwaves available on the6GHz band is quadruple what has been available before. Exciting stuff! 

 

On a personal ‘how will this affect me’ level, it means that if you live in a block of flats, and you are the first person to get a 6GHz router, then you won’t be competing with anyone for a connection. The great thing is that even as 6GHz routers become more popular, it’s likely that signals will stay faster and stronger than previously as it’s a more spacious spectrum.  

 

Will Wi-Fi 6E be faster?

 

It’s not quite as straight forward as that, but Wi-Fi 6E will sort of be faster. Theoretically, 6GHz Wi-Fi has the same top speed as 5GHz Wi-Fi. The maximum Wi-Fi 6 standard speed is 9.6 Gbps. Now, you’re not going to actuall get that speed in real life, however having access to the new airwaves could well increase your speed. 

 

The available spectrum at 5GHz means that Wi-Fi signals aren’t as large as they could be. Whereas, it’s thought that routers at 6GHz will broadcast at the current maximum allowable channel size. That in itself, means a faster connection. 

 

These new networks could see smartphone Wi-Fi connections hit 1–2 Gbps. You might be wondering how this compares to 5G – Indeed, these are the speeds expected from millimetre-wave 5G. However, that has very limited availability. 

 

Remember that your internet speeds will also always depend on / be limited by your provider. But it could still be a huge jump for connectivity.  

 

Can I buy Wi-Fi 6 devices?

 

Here in the UK we started to see Wi-Fi 6 devices creep onto the market in the last year or so, once the Wi-Fi Alliance started offering certification for Wi-Fi 6E. Deployment has been slow and steady, with more Wi-Fi 6 enables devices appearing bit by bit. We’re on course for the next generation of Wi-Fi networks.

 

Wi-Fi 6E enabled devices are most seen in smartphones and then tablets, with TV’s likely to follow suit. We use our phones for almost everything, so it’s no surprise that it’s this device that will be top of the list for Wi-Fi 6E. 

 

How do I know if a device supports Wi-Fi 6E?

 

The most widely used Wi-Fi standard on current devices is probably still Wi-Fi 6, the standard previous to Wi-Fi 6E, which you could still see on the box of a new device. This isn’t such a bad thing – It means that the device supports that Wi-Fi standard and offers efficient Wi-Fi performance. 

 

What you should probably start looking out for when buying a new device is Wi-Fi 6E – It’s this one that is extended into the 6GHz band. All devices, like smartphones, tablets, laptops and routers should have backward compatibility – Meaning they will work with any previous Wi-Fi standard to the one that’s stated on the box. This means that you can enjoy available connections even when Wi-Fi 6E isn’t available. 

 

Be aware that even if you buy a Wi-Fi 6E compatible device, you will enjoy the benefits of that when you use it with a Wi-Fi 6E router. 

 

6GHz will become an integral part of Wi-Fi 6 and future generations of Wi-Fi. This means that at some point, you will have to replace your devices with ones that are Wi-Fi 6E compatible to be able to enjoy all the benefits the extra spectrum has to offer. 

 

Due to the Wi-Fi Alliance certification programme, only efficient Wi-Fi 6 devices will be certificated. 

 

It’s worth bearing in mind that the 6GHz spectrum does have some existing licensed users. This means that particularly in outdoor spaces,  Wi-Fi will have to work around them. Outside, routers will need to use something called an “automated frequency control” system. This ensure that they don’t interfere with these existing 6GHz users. Because that means less space to broadcast, there could be degradation of overall performance in some areas.

 

Does Wi-Fi 6E have anything to do with 5G? 

 

We touched on this earlier, but no, they don’t have anything to do with each other really. It just happens that both of these networks are being spoken about a lot, simultaneously. 5G is everywhere, is it not!

 

We keep saying about Wi-Fi 6E being a new spectrum, but really it’s not new, it’s always been there, it’s just been unlicensed. Now, people can use the 6GHz spectrum without a license in their homes. 

 

This also means that other technologies could try to make use of the 6GHz band, which could in turn take up some of the space that Wi-Fi wants to use. 5G is one of the technologies that could be a rival for the space on the 6GHz band. 

 

There is a possibility that 5G could overlap on the new Wi-Fi 6E spectrum through mobile network carriers. This could in turn lead to interference issues, but it’s a bit early to say. If you’re wondering whether 5G will become dominant and replace Wi-Fi altogether, then we think probably not. There doesn’t need to be a winner or a loser when it comes to Wi-Fi 6E vs 5G – They dont necessarily have to be in competition with one another. The spacious nature of this spectrum means there should be enough room for both. 

 

6GHz Wi-Fi is certainly being revered by the tech industry, so we’re pretty hopeful that Wi-Fi will be the main beneficiary of the newly opened 6GHz spectrum. 

 

Which is best for my business – FTTP or a Leased Line?

 

Let’s face it – These days, business flow depends on connectivity. 

 

With remote working now more prevalent than ever before, there is a significant business need for straightforward online collaboration. Not to mention business critical operations and organisational efficiency. 

 

For a successful business, you need a reliable, strong connection that doesn’t buffer or drop out during vital video calls and digital team meetings. 

 

What’s the point in having top of the range tech and dedicated employees if you don’t have the broadband speed to keep up with their communications or computers?

 

There is nothing less motivating than slow internet – Lagging video, audio that’s out of sync, calls that drop out, pages that load slowly. It makes us feel frustrated just thinking about it! 

 

And whilst it might not sound like much – That 30 seconds of delay here and there throughout the day could actually add up to a lot of lost productivity across an organisation in just one week. 

 

So what’s the solution? For any small business, it’s really down to two options – FTTP (Fibre to the Premises) or a leased line. But which one is best for your business?

 

What is FTTP and how does it work?

 

As we said above, FTTP is Fibre to the Premises. It means an internet connection that is designed for small businesses and consumer use.  

 

FTTP works by sending data over a fibre optic cable from the exchange to the user’s premises. FTTP relies on already existing broadband infrastructure, which means that users share the bandwidth. This could lead to slower connection speeds and unreliability during peak times. 

 

An FTTP service is asymmetrical, meaning that the upload and download speeds are not the same. 

 

What is a leased line and how does it work?

 

A leased line, or fibre leased line, is a dedicated fibre optic service. It has a fixed bandwidth and is provided directly to the premises. Unlike FTTP, a leased line connects directly to the public internet. This means there is no shared infrastructure – thus the data’s journey is very different. 

 

Due to leased lines being dedicated, it won’t be affected at peak times because the bandwidth is reserved exclusively for that user. A leased line also uploads data at the same time as it downloads – Useful for sending large files or if you use VoIP telephones throughout the business. 

 

How do FTTP and Leased Line compare? 

 

Let’s take a look at how FTTP and Leased Line compare to each other in terms of use and functionality. Depending on how these fit with your business, you should hopefully be able to identify which would work better for you and your business operations. 

 

Speed and Bandwidth for FTTP vs Leased Line

 

Using an FTTp service, your highest download speed will be in the range of 300mbps and 1Gbps. Remember, in this scenario you share the infrastructure with other users, which means that during busy periods your bandwidth is likely to be compromised. Generally speaking you are looking at about 32 customers on an FTTP service. 

 

On a Leased Line, all of the bandwidth is there for you to use. The connection speeds on a Leased Line could be up to 10Gbps, with the same upload and download speeds. This is particularly useful for high-demand users, who could struggle on an asymmetrical FTTP. 

 

Traffic on a FTTP vs Leased Line

FTTP services can have a monthly data transfer quote which means it would be important for you to stay on top of your data usage. 

 

A leased line has availability 24/7 all year round, which means you have unlimited data transfers. 

 

Price of FTTP vs Leased Line

There is a significant difference in price when it comes to FTTP and Leased Line. 

 

The cheaper option is FTTP. This is because it’s a shared service, and more specifically aimed at residential properties and small businesses. You would likely be looking between £30 and £60 per month, which of course depends on the provider and the speed of the broadband you choose. For a new FTTP installation, it would take about 10-15 days. 

 

For Leased Lines, you would be looking at a cost of about £150 per month for lower bandwidths. Not only is it up to 5 times the cost of some FTTP, you may also incur additional charges (construction charges) which can push the price up more. Installation wise you would be looking at about 60-90 days to get things set up. 

 

Service Level Agreements for FTTP vs Leased Lines 

 

Whichever service you go for, you will have an SLA. The SLA for a Leased Line will be more thorough – For example, any fault on the line that needs fixing will be repaired within 5 hours. In comparison, a fault on FTTP could take 2 days to fix. 

 

An SLA will also lay out the speed of a Leased Line, which you can then be compensated for if it is consistently slower. This isn’t something you can do with FTTP. 

 

A Leased Line also comes with 24/7 support, whereas support for a FTTP line will be within business hours. 

 

Reliability of FTTP vs Leased Lines

 

As we mentioned above, when using an FTTP line, you could notice an adverse chane in connection during peak times. Leased Lines will never experience this problem (unless there is a fault) so you are less likely to have the connection drop out. This means that a Leased Line is the more reliable connection of the two. 

 

Availability

 

Leased Lines are available throughout the UK, but of course their accessibility depends on whether you can afford the cost. 

 

Whilst FTTP is a cheaper option, it is only available to approximately 94% of the UK.

 

Contracts

 

Contract options for these lines are as follows:

  • FTTP – 12 months, 18 months or 24 months, 
  • Leased Line – 12 months, 36 months, or 60 months 

 

It’s worth noting that if you choose a 12 month Leased Line contract, you’ll be paying more each month to spread the installation cost. 

 

So Which One is Best – Leased Line or FTTP?

 

If you own a small business, run a charity or are a residential consumer, then FTTP will likely meet your needs. 

 

Generally speaking, if you are one of these types of consumer then you won’t be needing service 24/7 all year round. You are also less likely to be transferring huge amounts of data too. And it’s the cheaper option! 

 

For larger businesses and organisations that rely more on a reliable connection, then a dedicated Leased Line service with a thorough SLA could be the better choice. You will then have peace of mind that your broadband is sturdy, and should something go wrong with it you’re backed up by a speedy resolution. Keeping disruption to your organisation to a minimum! 

 

Get In Touch

 

If you are feeling unsure about what could be the best internet service for your business and would like to discuss your connectivity needs, then get in touch with one of our Wi-Fi Experts today. We operate out of Hampshire, London and Cardiff and can help you to make sure that your connectivity meets your business or residential needs – Both in terms of connection but cost too. 

 

Wi-Fi Site Surveys – Validate Your Wi-Fi Design

You could have the most expertly designed Wi-Fi network, but without a Wi-Fi Site Survey, how will you know it will actually work as intended?

When it comes to designing and installing a wireless network, the most important thing is that it meets the demands of your users. 

The great thing about a Wi-Fi Site Survey is that can test your wireless network when it’s in the design stages and predict whether it will work or not, as well as within an already deployed network that needs some changes or additions made. 

Driving your Wi-Fi network design choices and deployment with data removes the risk of your wireless network failing to meet the needs of your enterprise. 

Gone are the days where a surveyor is laden down with computer setups, trudging around like a donkey. Nowadays it’s all the latest tech and we can carry out a Wi-Fi Site Survey with just the phone in our pocket. 

Validating your Wi-Fi network has never been more straightforward. Good news if you’re about to be designing your Wi-Fi network! Not only that, but it also makes it easier and quicker for businesses to be able to survey their Wi-Fi on a regular basis, ensuring that they continue to operate reliably. This is particularly important for anything that is business critical. 

 

What is a Wi-Fi Site Survey?

Well first things first – You might be wondering what actually is a Wi-Fi Site Survey? The purpose of a site survey is to visit the network premises and capture Wi-Fi signal and spectrum data. It also allows you to investigate the best places to mount access points and identify accessibility for necessary cabling. 

Getting a Wi-Fi site survey can test out a predictive Wi-Fi design before you deploy it on the network as well as check that any changes or additions to an existing network will work effectively. 

Why would I need a Wi-Fi Site Survey?

There are a few different scenarios where we would recommend a Wi-Fi Site Survey. 

  • Wi-Fi Design Site Survey – This survey is carried out on site before you’ve started to design your wireless network. Performing a Site Survey at this point allows you to create a predictive Wi-Fi network using data captured on the survey, including RF conditions, neighbouring networks, available/ congested channels, interference and accessibility for mounting AP’s.

     

  • Pre-Deployment Site Survey – Once you’ve designed your Wi-Fi network, you can use a Wi-Fi Site Survey to test your design and simulate the performance of antenna and access points. This data is acquired by placing an AP in the relevant location(s) and then analysing the Wi-Fi, making sure that the network would function as predicted in the design.

     

  • Post-Deployment Wi-Fi Site Survey – The role of this Wi-Fi Site Survey is to identify whether a deployed network is working as intended. That means meeting performance expectations laid out in the predictive stage of the wireless design.

     

  • Health Check Wi-Fi Site Survey – The best networks carry out regular ‘health checks’ to make sure everything is functioning as it should. This means that any changes you need to make to your network are proactive rather than reactive. Why wait until your end users are experiencing Wi-Fi problems that could produce a costly Wi-Fi outage? A Wi-Fi Site Survey at this stage can help pick up any issues with interference, coverage and capacity, nipping any potential problems in the bud.

     

  • Troubleshooting Wi-Fi Site Survey – This is the Wi-Fi Site Survey you would carry out if you were already experiencing problems. A more reactive survey in which you can identify the underlying cause of the problems your end users are reporting. You can then go back to the design stages and re-deploy your wireless network for more effective working. 

Why is a Wi-Fi site survey important to validate your wireless network after the design stage? 

 

As we said above, by carrying out a Pre-Deployment Wi-Fi Site Survey, you can test the predictive Wi-Fi design before installing it. Validating your wireless design with a site survey gives you peace of mind that the network you are deploying will work effectively. Any potential niggles can be identified, and designs can be amended before you’ve started the deployment. 

 

No one wants to have run cables and installed AP’s only to find that they work much more effectively in a different location! It’s also very handy to find out any potential causes of interference so you can take steps to avoid them. 

 

You could think of a Wi-Fi Site Survey as a bit of an insurance policy. It’s the smart way to avoid mistakes and ineffective networks, not to mention time-consuming and costly re-design processes should a wireless deployment fail. 

 

A predictive Wi-Fi design is great, but it’s not final. It’s not ready until you’ve tested your design with a validating Wi-Fi site survey. 

 

So what things would a Wi-Fi Site Survey identify to validate your wireless design?

By completing a Wi-Fi Site Survey, you would find out the following:

  • Accurate floor plans – If you haven’t set foot on site, then you are placing an awful lot oftrust in your CAD floor plan being accurate. By actually being on site and carrying out a survey, you can make sure that the distances in the design are correct and walls, stairwells and lifts are all where you expect them to be. If your whole Wi-Fi design is based on a floor plan that’s out of date, your predictive design is unlikely to fare well in the real world.

     

  • Signal attenuation and wall types – Completing a predictive Wi-Fi design using your ‘best guess’ is not really going to cut it. It’s actually really important that you know where walls are and what they are made of. Getting on site for a survey means you can check wall attenuation (ie. how much signal you are losing through the walls). Checking this information enables you to make sure that the RF measurements in your design are correct and confirms that your Wi-Fi design will work (or allow you to make the necessary changes to your design to make sure it does).

     

  • Access point locations – There is nothing quite like a Site Survey for identifying where AP’s need to be located. Carrying out the Wi-Fi Site Survey lets you check your predictive plans in a live environment. For example, checking the locations are free of obstacles (like ducting) and modifying your design if needed. It’s so important that you use this stage to test your predictive wireless design and make any changes needed to optimise it further.

     

  • Neighbouring networks – A predictive Wi-Fi design can’t know how neighbouring networks and local RF noise would affect the network. A Wi-Fi Site Survey can pick up instances of interference, and allow you to make sure your network design has peak performances and avoids neighbouring interference. 

 

What do you need for an accurate Wi-Fi Site Survey?

The Wi-Fi Site Survey is your chance to see how your network design could come to life. Really, the testing is the fun part! The most important parts of a successful Wi-Fi Site Survey are:

  1. An accurate floor plan – Make sure the measurements are correct. It’s vital that you are scaling your floor plan if you want your design and validation to be precise. Even seemingly small mis-scaling can make your plan inaccurate by many metres. Not helpful at all!

     

  2. Utilise available tech – There are lots of tools out there to help you. Using an all-in-one diagnostic measurement device can help you make sure that your design and site survey are as accurate as possible, giving your wireless network a professional result. It also helps you to carry out your Wi-Fi Site Survey a lot faster.

     

  3. What channels are you scanning? – There’s no point scanning channels you don’t care about. It’s just a waste of time. If you have no 2.4GHz access points or radios, then you don’t need to bother scanning those channels. And the fewer channels you have to scan, the faster your site survey will be!

     

  4. Make sure your data is accurate – The aim of your Wi-Fi Site Survey is to capture data that is going to either validate or help you make changes to your wireless design. Therefore, it’s imperative that you are capturing data accurately. If whilst walking, your path looks like you’ve walked out a window or got stuck in a wall then you need to re-establish your location. Otherwise the data you are capturing won’t be accurate, or helpful!

     

  5. Measure attenuation on both sides of the wall – To identify how much signal is being lost to obstacles like walls, you need to measure the attenuation on both sides of that obstacle. By measuring on both sides of the wall, you make sure that you are capturing all the data you need.

     

  6. What survey method do you need for your environment? – There are a few different survey methods so make sure you are using the one that is going to give you the most reliable data.

    Stop and Go – This is used in environments that are hazardous or particularly challenging. This one collects the least amount of data, but it’s important that you remain aware of your surroundings.

    Continuous – Lots of clicks on this one! It’s the traditional means of collecting Wi-Fi Site Survey data, but requires lots of attention at all times. You must click when you start, turn, change pace and of course, when you stop!

    Autopilot – This one is the Wi-Fi expert’s favourite. It’s quick and accurate. Using this one means you don’t have to manually click as you are walking through the site map. All you need to do for accurate results is make sure that the first calibration is accurate.

    GPS – If you are working outdoors with no key reference points then this Wi-Fi Site Survey is a great option. All you’ll need is a GPS-enabled mobile device with a SIM card. 

Trust the Experts

If Wi-Fi Site Surveys have got your head in a spin, then why not leave it to the experts? Our trained Wi-Fi professionals here at Geekabit are experts when it comes to wireless site surveys. 

Operating out of Hampshire, London and Cardiff, our Wi-Fi experts are on hand to assist with all stages of Wi-Fi deployment – From the initial design and Pre- and Post-Deployment Site Surveys to Health Checks and full installations. 

Get in touch with our friendly team today and we’ll be more than happy to help. Or head to our website to find out more about the Wi-Fi Site Surveys Geekabit have to offer. 

 

How to Remotely Monitor a Robustel 4G Router

In this blog we’re going to show you how you can link the Robustel 4G router with other platforms, so you can monitor your router remotely in real time, in a way that best fits with your business operations. 

 

Who are Robustel?

Robustel are used across various industries including Retail, Healthcare, Transport, Oil & Gas, Manufacturing, Security, Agriculture and Smart Cities. 

 

The design and manufacture of Robustel products provides industrial quality wireless routers, modems and gateways for Wi-Fi, cellular and LPWAN networks. This includes 3G/4G/LTE/5G in cellular networks and Cat-M1/NB-IoT/LoRaWAN/Bluetooth in LPWAN networks. 

 

Robustel customers are provided with EDGE Computing, Cloud Software and end-to-end IoT Solutions to complement the hardware. 

 

If you’re an enterprise or mobile network looking for a competitive edge in the IoT market, then Robustel could be just the thing. They are passionate about long-term relationships with their customers and partners, and work alongside many distribution partners in 120 countries including the UK.

 

Robustel work with businesses across the world in various industries – Solving connectivity problems with scalable, robust and secure IoT solutions. Whether you are just looking for the hardware or a complete  ‘IoT in a box’, Robustel will have a solution. 

 

So where does Geekabit come in, you might be wondering?

 

Well, while Robustel has an excellent interface for remote diagnosis and simple email notifications, it does not provide automated notifications to other platforms, with checks sent to your IT support teams.

 

How can Geekabit help with Robustel 4G router monitoring?

 

Here at Geekabit, we can provide access to our router monitoring software platform for real-time notifications of uptime, downtime, speed issues via:

  • Slack 
  • Teams
  • Text message
  • Automated phone calls

If none of those are sufficient, we can also provide an API connection to automatically import your Robustel notifications to the platform of your choosing.

 

Get in touch

 

If you have or are considering a Robustel router for your use case, but are not sure of the benefits vs a Teltonika router, please speak with one of our Wi-Fi experts.

 

If you think a 4G router will not provide sufficient upload and download speeds for your use case, please get in touch with us here at Geekabit

 

By using the right combination of equipment, external antennas, research and evidence based placement, we can dramatically increase what is possible.

 

Image from Robustel.com – Product shown is the R1520 Dual-SIM Cellular VPN Router.

Enterprise 5G: What You Need To Know 

You may be wondering what 5G means for enterprises. You may well have googled it and landed here! The prevalence of 5G will help to empower businesses – Allowing them to create new experiences and connect in more inventive ways.. 5G will help to change how we work and how we play as well as providing the solution for many problems. Some of them we might not even know about yet! There is a constant buzz in the air surrounding 5G and the excitement of all the possibilities it brings. It might also be causing a bit of FOMO – Businesses will not want to be the ones left behind. 

 

5G is quite often used as a backup for 4G – But those days may soon be over. Businesses will need to start considering using 5G as their primary mobile network, as well as the possibility of using it or their wireless environment – Negating the need for office wiring. 

 

Transformation is happening across all industries – As it tends to do with the introduction of new technology. An ever-changing world! 5G could well be the latest key when it comes to boosting the ambition of your business and increasing the confidence of enterprise customers. 

 

There are 3 main take homes when it comes to Enterprise 5G:

  • This year, the investment in 5G looks strong in enterprises across industries
  • Confidence in the ability to implement 5G successfully is low (only 25% of enterprises feel very confident about effective implementation)
  • Sustainability needs must be met by 5G providers and IoT use

 

The level of current and future spending on emerging technologies is looking healthy, yet there are some significant challenges that industrial 5G needs to overcome. With only a quarter of enterprises feeling confident in their ability to implement 5G successfully, it is vital that 5G providers can help enterprises to get set up. 

 

So what do our 5G providers need to know? Well they need to know what enterprises are thinking when it comes to 5G implementation in order for them to become trusted business partners. 

 

There are several key insights that need to be considered for Enterprise 5G. 

 

Adoption of 5G is not guaranteed


Just because the intention to invest in 5G is there, doesn’t mean it’s a given. The future looks bright in terms of enterprises adopting emerging technologies over the next few years, with investments likely to rise.  The intention to invest in 5G is highest amongst enterprises adopting new technologies. 17% have already invested, and 56% plan to invest in the next 1-3 years. Only 12% are not planning to invest whilst they monitor technological changes.

It seems that organisations are mostly interested in 5G for its use in helping them to meet their sustainability goals as well as improving supply chain management.

This doesn’t mean that 5G implementation is guaranteed. Indeed, just because 5G is becoming more mainstream, doesn’t mean that all organisations are going to stay receptive to it. Asian companies planning to invest in 5G is actually down 10% in comparison to last year.

 

Enterprise 5G Vision Becomes Defensive

 

The mindset towards 5G and IoT is prizing efficiency and optimization instead of entering adjacent markets and driving top-line growth. The top priority of enterprises when it comes to IoT is operational efficiency. Similarly, less enterprises want to spend on IoT for new products and services. 5G application uses for VR and AR seem to be diminishing.

We also need to look at Environmental, Social and Governance consideration as although these are fueling interest in 5G, they are also necessitating new demands on tech providers. Sustainability is a hot topic at the moment, and almost 50% of businesses don’t feel their sustainability needs are being met by 5G vendors.

 

New ways of buying and deploying 5G are well received by enterprises

 

Enterprises seem very receptive to 5G solutions, with over three quarters of businesses interested in using private networks to support the implementation of 5G. Furthermore, 50% of businesses thought that purchasing private network capabilities was an important 5G investment strategy. The reasons being that it provided more control of their network and improved reliability.

It would seem that the lack of confidence in 5G implementation could lead to businesses purchasing 5G through a MVNO (mobile virtual network operator). This implies that the relationship between telecommunications operators and enterprise customers could be in jeopardy. They need to ensure that 5G offerings are offered with easy market strategies.

 

Focus on 5G’s relationship to other technologies, with less attention on cyber risks

 

It looks like one of the top priorities for businesses is looking at the relationship of 5G with other technologies. It would be beneficial for enterprises to receive ongoing information and education on emerging technologies and how they relate to each other for their business needs. Not understanding the relationship between 5G and other emerging technologies could cause challenges.

Rather incredibly, less than a quarter of businesses viewed reducing the risk of cyber threats a priority in terms of IoT and 5G. We cannot stress enough how vital it is for enterprises to design their 5G and IoT deployments with security in mind. This is not a blind spot that can be ignored.

 

Telecommunication operators are falling behind network vendors



Enterprises are supporting their 5G deployments with their technology and telecoms providers, often following selection criteria based on price. Pricing seems to even come above the speed of execution.

It seems that enterprises don’t just want a technology supplier – They want a transformation partner. And who the experts are in this area is fairly evenly split between application and platform vendors and professional services firms. Hot on their heels are network equipment vendors! Less than a fifth of enterprises view telecommunication operators as experts in digital transformation. Whilst trusted as IoT experts, they need to prove their ability to deliver new connectivity transformations.

 

Ambitious ecosystem strategies for enterprises

 

Enterprises are wanting to take advantage of new technologies and ecosystem collaboration is one route towards these new skills and knowledge. Much of their 5 year growth is based within business ecosystem collaboration. There is a growing emphasis on developing cross-sector partnerships as well as shortening the time between new products and services, and revenue. These are ambitious drivers of ecosystem strategies.

Perhaps the most important takeaway from all this is that nearly three quarters of businesses are prioritising suppliers that can offer the relevant ecosystem relationships as part of their 5G capabilities. This means that any 5G provider needs to meet their customers needs and expectations by tapping into these fast-changing corporate ecosystems.  

 

 

Get in touch

 

If you’re struggling with wired broadband, and not getting the reliable internet connection you need in your business, then 5G could be a fantastic option for you.

 

It can feel like a big jump to give up on your wired broadband connection and opt for 5G – Which is where our Cell Coverage survey comes in.

We can tell you exactly whether 5G broadband would work for you, and which network would be most reliable.

 

Give our Wi-Fi experts a call or email us today!

 

How can I improve my 4G signal speed?

Is there anything worse than slow Wi-Fi or a poor data connection? Waiting for a webpage to load or watching a video b-b-b-buffer. It is so frustrating! 

 

More and more people are now opting for 4G or 5G cellular connectivity in their homes, replacing fibre broadband that’s too slow. Many households are also using 4G/5G connectivity as a back up in the form of hybrid broadband. 

 

Why do people choose cellular broadband? Sometimes it’s because of the price of regular wireless broadband, which can be expensive – Especially in more rural areas where it’s also slow. In these instances, cellular signal if more often than not a faster option. 

 

4G LTE and 5G do have their own restrictions though. Slow data rates on 4G LTE and 5G are also common. But is there a way to improve your 4G signal speed and data rates?

 

How Can I Improve My 4G LTE or 5G Speed?

 

There are three main things you can try to help improve your 4G and 5G data rates:

  1. Update your Device

    If you are using old devices, you may only be connecting to older bands. Using a new phone, tablet, laptop or hotspot could help you to connect to new bands. The newer the device, the more likely they are to support a newer version of the 4G LTe or 5G spec, which would in turn bring you faster data rates.

  2. Try using External Antennas

    Many major carriers have hotspots that support external antenna ports. You may find that using an external antenna could help you to improve signal strength, signal quality and help you access bands that aren’t getting indoors. 

 

  1. You could try a Signal Booster

    The majority of phones (as well as some hotspots) do not have external antenna ports. If you are trying to improve data rates on your phone, you could use a signal booster. They work by amplifying your signal as well as increasing the signal strength of the signal. You can also use them alongside external antennas – They enable the rebroadcast of improved indoor signal.

What configurations can I use to improve 4G / 5G signal strength?

There are a couple of configurations that our Wi-Fi experts would recommend giving a go.

 

1. Latest Hotspot + Directional Outdoor Antennas

 

If you’re happy to use Wi-Fi for distributing your signal indoors, then you can use a hotspot (from your chosen carrier) used alongside external antennas which are mounted on the outside of the building.

Pros

  • If you already have a hotspot, this can prove highly cost-effective
  • Easy to support MIMO (multiple input, multiple output). Using multiple antennas can help improve performance
  • Offers the fastest available data rates
  • Using directional outdoor antennas can help improve signal to interference and noise ratio (SINR) as well as enabling you to access weaker outdoor bands, and improve MIMO performance


Cons

  • It requires a hotspot, with a line of service
  • Your system will be hard-wired. Mobile phones will be able to connect via Wi-Fi but won’t see better 4G/5G signal.

 

  1. 4G LTE or 5G Signal Booster + Directional Outdoor Antenna

 

A mobile signal booster is a great alternative if you don’t have a hotspot, don’t fancy one or simply cannot afford the monthly charges associated with adding a phone line. You may also just want to have wireless 4G / 5G coverage inside, which a mobile signal booster will give you. 

 

A mobile phone signal booster works by amplifying the signal from outdoors and then rebroadcasting it indoors via wireless. Thus getting you the best data rates. 

Pros

  • Provides wireless coverage for multiple devices
  • Will works with existing phones
  • You don’t need a hotspot or extra phone line
  • Using the directional outdoor antennas can help to improve SINR
  • A booster could enable you to connect to weaker bands

Cons

  • Boosters are SISO (single input, single output) with one antenna outside and one antenna inside. This means you cannot use MIMO with this option, and it decreases speeds by approximately 33% 
  • This option can be more expensive than external antennas

 

What can cause slow 4G / 5G data rates? 

 

If we’re trying our best to improve our 4G and 5G data rates, it would make sense to identify what actually causes rates to be slow. There are five main factors that can affect the 4G LTE / 5G data speeds you experience.

 

  1. The Signal Quality (SINR)

    The quality of signal in 4G / 5G networks is measuring in signal to interference and noise ratio (SINR). If you can increase your SINR, you can dramatically improve your data connection speed. As outlined above, you can improve your SINR by using a directional outdoor antenna, which can also be connected to a signal booster or directly to your 4G / 5G hotspot.

  2. The Number of Connected Bands

    Carrier Aggregation is when your phone (or hotspot) is able to use multiple bands to connect to the tower simultaneously. This means that the more bands you are connected to, the higher your data rates.

  3. The Signal Strength (Reference Signal Received Power)


You might be thinking that signal strength must be the most important factor, but it’s actually not. In 4G and 5G networks the RSRP signal strength certainly does matter, but it’s not the most important thing. Check your RSRP – If it’s already stronger than -100dBm, then having a stronger signal won’t help to increase your data rates. 

 

  1. Congestion

    As you can imagine, the more users there are on the tower, the lower your data rate is going to be. The congestion in the tower will also vary by band. In general, lower frequencies penetrate buildings more than higher frequencies. This means that the higher frequency bands are usually less congested. This means that using an outdoor antenna and connecting it directly to your hotspot or signal booster Ican really help you to access the less-congested bands.

  2. MIMO Support

    Using MIMO means that you can use multiple antennas to increase data rates by about 30%. The majority of mobile phone signal boosters are SISO (Single Input, Single Output) but you could install two systems in parallel to get a MIMO booster. 

  3. Throttling

    If you’re with a Mobile Virtual Network Operator, it means that the service provider does not own the wireless network infrastructure. This means that the main carrier’s network may treat your connection like a second-class citizen and find yourself throttled! Throttling may also occur if you use a lot of data per month. Throttling is how the service providers manage the data they provide – They can de-prioritise certain users and even stop their connection going over a certain speed.

 

Get in touch

If you’re struggling with wired broadband, and not getting the reliable internet connection you need in your rural business or home, then 4G / 5G could be a fantastic option for you.

It can feel like a big jump to give up on your wired broadband connection and opt for 4G – Which is where our Cell Coverage 4G survey comes in.

We can tell you exactly whether 4G broadband would work for you, and which network would be most reliable.

 

How do I get reliable Wi-Fi in my garden? 

Hello Spring heatwave! Hampshire, as well as other parts of the UK, have been treated to a bit of a March heatwave this week with sunny days that are feeling really warm. Finally! And now that many more of us find ourselves working from home more often, we wouldn’t be surprised if you’re trying to figure out a way to get all your gear out into the garden and Wi-Fi working well. 

 

Whether you’re soaking up the sun during Zoom meetings or attempting to escape the same 4 walls with some fresh air whilst answering emails – You’re going to need a strong, reliable Wi-Fi connection in your sun-soaked Hampshire garden. 

 

And no, it’s not okay to steal your neighbour’s Wi-Fi – Even if you know their password!

 

So, if you’re trying to make the most of the sunshine that Hampshire currently has on offer, then here are our top tips for getting strong, reliable Wi-Fi in your garden. 

 

Use an Access Point


Our first recommendation would be to run an ethernet cable out to the garden area and install a new access point. 

 

Many of our Hampshire based clients have homes where this option has worked really effectively. There are other options (see below) but this would always be our preference and recommendation when being asked how to get Wi-Fi in your garden. 


Where is your router? 

 

Is your router in the best place? You could try moving your existing router to see if a change of location improves the signal you get in your garden. 

 

We’ve visited many Hampshire homes where the router has been situated at the front of the house, most commonly in the front room next to the smart TV or telephone. This location makes it unlikely for the signal to be able to reach your back garden. 

 

Consider where you access the internet the most, and whether you could move your router to a different location that would work for both the house and the garden.

 

Extend your Wi-Fi range with a repeater 

 

If the range of your router won’t reach the garden from a suitable location inside the house, then there are ways you can extend it. A repeater is one possible solution, and works particularly well in larger homes. Some of our Hampshire based clients have found that a repeater has solved their Wi-Fi woes when it comes to getting a reliable signal in the garden. 

 

The pros – By placing a repeater in range of the garden, you can make your Wi-Fi go further. It’s cost effective and easy to configure. 

 

The cons – It works by mimicking your existing network and creating a new one. You would have to manually change the connection on your device when you move between the garden and the house. This option can also half your bandwidth, resulting in slower internet speeds.

 

Extend your Wi-Fi range with an extender

 

By using an extender, you can extend the range of your router by plugging it in at a position where it will provide coverage to your garden. 

 

An extender is cabled and takes internet signal directly from the router and emits it from a better location. Despite being slightly more expensive and a bit more complicated to configure than the repeater, our resident Wi-Fi expert says, 

 

One of the biggest benefits of an extender is that it is connected using a wired connection, so there is no need for a wireless signal to operate it. This also means that the bandwidth stays at its full potential.

 

We’d recommend that you consider calling in the experts if you’re considering this option – And we reckon our clients that are currently enjoying Geekabit installed Wi-Fi extenders in their sunny Hampshire hotspot would say the same! 

 

Mobile Tethering

If your smartphone has good reception outside, then you can use its Wi-Fi hotspot and tether that to your laptop or other device to use its connection. 

 

However, it’s worth bearing in mind that the data you use will come off your monthly allowance, and if you go over it can be rather a costly mistake.

 

This option is probably more suited to those ‘one-off’ moments – Perhaps to tide you over while you wait for one of Geekabit’s Wi-Fi experts to come and sort out a more long-term Wi-Fi connection in your garden. 

 

Get in touch

 

So there you go, some of our top tips on how to get Wi-Fi in your garden so you can enjoy the Spring sunshine whilst working from home!

 

If you’ve tried the options above and still no joy, don’t be afraid to call in the experts! Our Wi-Fi experts are on the other end of a phone call or email and are happy to help get your Wi-Fi working as it should. 

 

We work out of Hampshire, London and Cardiff and are really passionate about getting people the Wi-Fi connection they deserve. 

 

5G Survey London

With the increasing prevalence of 5G availability across London, you might be needing a 5G survey. Perhaps your London business is moving premises – Or maybe you’re looking to buy or rent a property in London? Either way you need to know that wherever you’re living or working in London will have decent cellular and data coverage. 

Mobile coverage is a huge part of buying or renting a new property – Whether for a business or somewhere to live. 5G mobile phone coverage could be a massive deal breaker if it’s not at the level people have come to expect. 

Thankfully, here at Geekabit we offer a 5G survey in London and the surrounding areas – We know our stuff when it comes to all things wireless. We understand how vital it is to maintain strong connections, whether it’s in the office or at home. 

 

Geekabit’s 5G Survey London

Geekabit offer both internal and external 5G surveys, looking at mobile phone coverage both inside and outside your property. 

You might be wondering – Why would I need a 5G survey? 

For our clients that are wanting to map out the availability of 5G cellular and data coverage in a London office or building, the 5G survey would be a great tool. It’s extremely useful if your organisation is considering moving premises. It is so important nowadays to make sure that you have good 5G mobile phone signal coverage before signing on the dotted line. You don’t want any nasty surprises when it comes to coverage once you’ve moved in! 

Our landlord and estate agent clients also find it a very beneficial tool when it comes to selling or renting out business or residential properties in London. Tenants and house buyers aren’t just looking at the water pressure of the taps or the state of the windows – They’re now asking questions about the strength of cellular reception. Our 5G Survey gives you all the information you need to know. 

People want to make sure that where they live and work in London will have strong 5G mobile coverage. Geekabit’s 5G survey is the perfect way to prove your property has just this and on what networks. 

5G Hybrid Broadband

And where there’s a strong 5G connection, you know you’re covered if the internet goes down. Hybrid broadband is giving customers confidence that even if their standard internet connection fails, they will still have 5G mobile broadband to fall back on.

But this is only as foolproof as your 5G coverage. So before going ahead and investing in hybrid broadband, why not carry out a 5G survey first to make sure that your London property has the coverage you need to fall back on. 

 

Office and homes aren’t the only places where you need a strong, reliable 5G cellular connection

There are many external areas that would hugely benefit from an external 5G survey. Geekabit can also carry out a 5G survey along London roads, parts of the capital’s transport network and throughout leisure facilities in London and the surrounding areas. 

In today’s world, we don’t just stay in one place – Even while we’re working. We take our need for connection wherever we go – And it needs to be strong and reliable. 

Gone are the days where we are tethered to a desk – We need the 5G mobile coverage to be available on the go. Whether we are using a smartphone, tablet or other internet enabled device, we need to stay connected – And we need to know that the signal will be strong and reliable. 

Geekabit’s 5G survey can tell you how strong the cellular coverage is in certain areas of London, and which networks would work best for those locations. This information is invaluable.

 

How do we report the results of our 5G survey?

We can provide results, heatmaps and detailed reports measuring the details of phone coverage for 5G (as well as 2G, 3G and 4G/LTE). 

For any given London location, we can measure: 

  • The cellular connectivity
  • Data upload and download speeds 
  • The occurrence of dropped and failed calls for all the main mobile network operators

Over the last 2 years, companies have realised how vital cellular coverage is – For business operations as well as staying connected with loved ones. This was true before the pandemic, but Covid has certainly increased the need for strong, reliable mobile coverage. 

 

It’s time to invest in mobile enterprise

If you value the importance of the Quality of Service and Quality of Experience of your employees cellular coverage whilst they are at work, then it’s time to invest in mobile enterprise. 

Here at Geekabit, we’ve long been able to provide mobile phone coverage survey results for a fixed point – For example, a particular property in London. 

We can now provide this matched to geolocation data over a moving area, as well as on building plans and maps. When it comes to 5G surveys, this information is really important. 

If your London business has been thinking about investing in further mobile technologies, then our 5G survey is ideal for providing graphical and interactive information, allowing you to really drill down into the data and support and inform your worthwhile investment.

 

A word from our Founder

Steve Cross, Founder of Geekabit, comments:

“Mobile phone coverage has continued to increase in importance, with a massive investment throughout the pandemic in mobile working technology. With the great shift in office working already happening, organisations are looking to ensure that 5G mobile phone coverage in potential London office locations will be suitable for their workforce. Our internal cellular 5G survey tool gives clients the opportunity to make sure there will be no issues with mobile phones and tablets when moving buildings or downsizing.”

Want to know more about our 5G surveys?

For further details about the data which can be captured, or to discuss a potential project, please email our Wi-Fi experts at [email protected] and someone will be in touch as soon as possible.

 

Our 5G surveys are available across London and the surrounding areas. If you are interested in this service in a different location, please do get in touch. 

 

What’s the Latest on Starlink?

Last March we wrote about Elon Musk and his SpaceX Starlink enterprise for a satellite broadband internet system. 

 

Thought to be a low latency option ideal for rural areas, consisting of a constellation of small satellites in a low earth orbit, working with transceivers on the ground. 

 

Roughly this time last year, it hit the UK press for providing ground stations across Britain in association with telecoms mast company Arqiva.  

 

Now Musk boasts of shipping more than 100,000 Starlink satellite internet terminals to customers in over 14 countries. This sees the expansion of preorders to even more potential customers plus the release of a second generation home internet satellite dish. The possibility of Starlink providing in-flight Wi-Fi for air passengers is even being explored. 

 

The list of countries receiving Starlink internet terminals includes Ukraine, with more on the way despite the Russian invasion. 

 

Is Starlink available globally?

 

This would appear to suggest that Starlink has gone global. But is that the case? It is still unclear whether it has global scope, but it does seem to be well on its way. 

 

Last June, Musk spoke at the Mobile World Congress where he told the audience that with the exception of the North and South Poles, Starlink satellite internet would be available worldwide. 

 

This was due to begin last August, subject to regulatory approval, therefore availability would differ region to region. 

 

Then, in September, via Twitter Musk announced that Starlink satellite internet would finish its beta phase in the October. Further confirming that his satellite broadband service was ever expanding. 

 

Are customers using Starlink satellite internet?

 

Starlink seems still to be facing a backlog of prospective customers waiting for their equipment in order to start using the service. 

 

Is there anything not to like about Starlink satellite internet? 

 

Not everyone is pleased with the development of Starlink and its constellation of orbiting satellites. 

 

Many of those in the scientific community are concerned about how these low-orbiting satellites could negatively impact the visibility of the night sky. 

 

Who are Starlink’s competitors?

 

Starlink aren’t the only one trying to offer low latency satellite broadband. Despite the apparent momentum of Starlink, they are in competition with Viasat, HughesNet and of course Amazon’s Project Kuiper. 

 

These competitors have not shied away from trying to slow Starlink down with regulatory challenges. 

 

What’s next for Starlink?

 

Here at Geekabit we’ll be sure to make you aware of any further news regarding Starlink and their satellite broadband service. 

 

For a bit more background information on SpaceX Starlink, head to our previous blog

 

Can Starlink satellite broadband help with my rural Wi-Fi woes? 

 

We see our fair share of clients struggling with rural broadband. We’d love to see Starlink offering a long-term solution to people struggling to connect in more rural areas. 

 

If you’re struggling with rural Wi-Fi now and want a more immediate resolution, then get in touch with our Wi-Fi experts. We have a brilliant 4G solution to rural Wi-Fi problems. 

 

If you need reliable internet now, and a slow Openreach connection just isn’t cutting it, get in touch about our 4G broadband option today. You can read more about how we’ve helped rural clients in Hampshire get a reliable 4G broadband connection here.

 

What is Wi-Fi 7 and When Will We Have It? 

Things move fast in the world of tech. We might only just be connecting to Wi-Fi 6, yet Wi-Fi 7 is already hovering in the background ready to arrive on the scene and bring us even more improvements. Before we’ve even had a chance to enjoy the most recent ones! 

It’s only fairly recently that the Wi-Fi Alliance announced the certification for Wi-Fi 6E (or Wi-Fi 6 Extended). This joyful addition to the spectrum for unlicensed Wi-Fi was the first in 20 years! Yet even with this extra ability to give the 6 GHz band an advantage, the next generation of wireless technology is still on the way. And with the promise of even higher data rates and lower latency that the current offering!

Wi-Fi 7 (or 802.11be to be technically correct), in comparison to Wi-Fi 6, will:

  • Use multi-band/ multi-channel aggregation and operation 
  • Deliver higher spectrum and power efficiency
  • Have better interference mitigations
  • Offer higher capacity density 
  • Have higher cost efficiency. 

As a result of the projected ability for it to support up to 30Gbps throughout, this seventh generation of Wi-Fi is also being referred to as Wi-Fi Extremely High Throughput. It will be approximately 3 times faster than Wi-Fi 6.  

What are the enhancements of Wi-Fi 7 over Wi-Fi 6? 

Wi-Fi 7 is purported to offer a number of better features. Some of the direct improvements over it’s Wi-Fi 6 precedent are:

  • The support of 320 MHz transmissions. In comparison to 802.11ax, this is double the 160 MHz it currently supports
  • The use of higher modulation orders, optionally supporting 4096-QAM. This is a significant increase from 802.11ax ‘s 1024-QAM 
  • The allocation of multiple resource units, such as groups of OFMDA tones

Due to the last feature, Wi-Fi 7 will be the perfect option for enterprise spaces due to having more efficient spectrum utilisation across multiple resource units. 

Organisations requiring the addition of AR/VR, Iot and IIoT as part of their workflow will find Wi-Fi 7 a useful tool in their digital transformations. 

Applications that require deterministic latency (an upper limit to how long a signal takes to get from point A to point B), high reliability and quality of service will find that Wi-Fi 7 has the potential to support them. 

And it’s not just the workplace that Wi-Fi 7 will prove beneficial. Due to Wi-Fi 7 being optimised for video, those who enjoy gaming and streaming at home will also enjoy the improvements. Any smart-home devices and services will likely feel enhanced with the new Wi-Fi standard. 

The popularity of video is huge, and will only continue to grow. It is expected to become the dominant form of internet traffic (if it isn’t already). Cisco’s Visual Networking Index expected video traffic on a global IP scale would be 82% of all IP traffic by this year for both business and consumer. 

When can we expect to get Wi-Fi 7?

The 802.11be amendment is expected to be published by IEEE in 2024. Commercial deployment of Wi-Fi 7 will likely be around the same time. 

Following that, the Wi-Fi Alliance will then release the Wi-Fi 7 certification programme, just like with Wi-Fi 6 and 6E, which will ensure security standards and interoperability. 

But in the interim, we’ll be enjoying what Wi-Fi 6 and Wi-Fi 6E has to offer! You can read more about this Wi-Fi standard in our previous blog post, if you’re wondering what all the fuss is about.